Phone +420 774 723 123 Cart · 0 · empty

Signal lamps and LED strips

Signalling elements

Subcategories

Filters
Found 62 products
OUR TIP IN STOCK

D090DXY, EMAS, LED indicator green rectangle, 16mm, 12- 24V AC / DC, IP50

Cat. no.: D090DXY

D090DXY EMAS - LED indicator light, green, 12-24V AC / DC, 16 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
3,75 €
excl. VAT · 4,54 € incl. VAT
OUR TIP IN STOCK

D070DXM, EMAS, LED indicator blue rectangle, 16mm, 12- 24V AC / DC, IP50

Cat. no.: D070DXM

D070DXM EMAS - LED indicator, blue, 12- 24V AC / DC, 16 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
3,75 €
excl. VAT · 4,54 € incl. VAT
OUR TIP IN STOCK

H060XK, EMAS, LED indicator red 30 mm, 12-30 V AC / DC, IP50

Cat. no.: H060XK

H060XK EMAS - LED indicator light, red, 12-30V AC / DC, 30 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
4,29 €
excl. VAT · 5,19 € incl. VAT
OUR TIP IN STOCK

H050XB, EMAS, LED indicator white 30 mm, 12-30 V AC / DC, IP50

Cat. no.: H050XB

H050XB EMAS - LED indicator light, white, 12-30V AC / DC, 30 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
4,29 €
excl. VAT · 5,19 € incl. VAT
OUR TIP IN STOCK

H070XM, EMAS, LED indicator blue, 30 mm, 12-30 V AC / DC, IP50

Cat. no.: H070XM

H070XM EMAS - LED indicator light, blue, 12-30V AC / DC, 30 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
4,29 €
excl. VAT · 5,19 € incl. VAT
OUR TIP IN STOCK

H080XS, EMAS, LED indicator yellow, 30 mm, 12-30 V AC / DC, IP50

Cat. no.: H080XS

H080XS EMAS - LED indicator light, yellow, 12-30V AC / DC, 30 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
4,29 €
excl. VAT · 5,19 € incl. VAT
OUR TIP IN STOCK

B050XB, EMAS, LED indicator white

Cat. no.: B050XB

B050XB EMAS - signal LED indicator light, white, 12-24V AC / DC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
4,33 €
excl. VAT · 5,25 € incl. VAT
OUR TIP IN STOCK

B060XK, EMAS, signal LED indicator light red

Cat. no.: B060XK

B060XK EMAS - signal LED indicator light, red, 12-24V AC / DC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
4,33 €
excl. VAT · 5,25 € incl. VAT
OUR TIP IN STOCK

B080XS, EMAS, signal LED indicator light yellow

Cat. no.: B080XS

B080XS EMAS - signal LED indicator light, yellow, 12-24V AC / DC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
4,33 €
excl. VAT · 5,25 € incl. VAT
OUR TIP IN STOCK

B090XY, EMAS, LED indicator green

Cat. no.: B090XY

B090XY EMAS - signal LED indicator light, green, 12-24V AC / DC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
4,33 €
excl. VAT · 5,25 € incl. VAT
OUR TIP IN STOCK

B070XM, EMAS, signal LED indicator blue

Cat. no.: B070XM

B070XM EMAS - signal LED indicator light, blue, 12-24V AC / DC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
4,33 €
excl. VAT · 5,25 € incl. VAT
OUR TIP IN STOCK

CP050XB, EMAS, LED indicator white

Cat. no.: CP050XB

CP050XB EMAS - LED indicator light, white, 12- 24V AC / DC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
5,33 €
excl. VAT · 6,44 € incl. VAT
OUR TIP IN STOCK

CP060XK, EMAS, LED indicator red

Cat. no.: CP060XK

CP060XK EMAS - LED indicator light, red, 12- 24V AC / DC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
5,33 €
excl. VAT · 6,44 € incl. VAT
OUR TIP IN STOCK

CP070XM, EMAS, LED indicator blue

Cat. no.: CP070XM

CP070XM EMAS - LED indicator light, blue, 12- 24V AC / DC, 22 mm. Technical specifications, use and selection of variants.

In stock 3 ks
5,33 €
excl. VAT · 6,44 € incl. VAT
OUR TIP IN STOCK

CP080XS, EMAS, LED indicator yellow

Cat. no.: CP080XS

CP080XS EMAS - LED indicator light, yellow, 12- 24V AC / DC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
5,33 €
excl. VAT · 6,44 € incl. VAT
OUR TIP IN STOCK

CP090XY, EMAS, LED indicator green

Cat. no.: CP090XY

CP090XY EMAS - LED indicator light, green, 12- 24V AC / DC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
5,33 €
excl. VAT · 6,44 € incl. VAT
OUR TIP IN STOCK

B0B0XB, EMAS, LED indicator white

Cat. no.: B0B0XB

B0B0XB EMAS - signal LED indicator light, white, 100-230V AC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
5,78 €
excl. VAT · 6,99 € incl. VAT
OUR TIP IN STOCK

B0K0XK, EMAS, signal LED indicator light red

Cat. no.: B0K0XK

B0K0XK EMAS - signal LED indicator light, red, 100-230V AC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
5,78 €
excl. VAT · 6,99 € incl. VAT
OUR TIP IN STOCK

B0M0XM, EMAS, signal LED indicator blue

Cat. no.: B0M0XM

B0M0XM EMAS - signal LED indicator light, blue, 100-230V AC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
5,78 €
excl. VAT · 6,99 € incl. VAT
OUR TIP IN STOCK

B0S0XS, EMAS, signal LED indicator light yellow

Cat. no.: B0S0XS

B0S0XS EMAS - signal LED indicator light, yellow, 100-230V AC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
5,78 €
excl. VAT · 6,99 € incl. VAT
OUR TIP IN STOCK

B0Y0XY, EMAS, LED indicator green

Cat. no.: B0Y0XY

B0Y0XY EMAS - signal LED indicator light, green, 100-230V AC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
5,78 €
excl. VAT · 6,99 € incl. VAT
−10 % OUR TIP IN STOCK

CP0K0XK, EMAS, LED indicator red

Cat. no.: CP0K0XK

CP0K0XK EMAS - LED indicator, red, 100-230V AC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
6,06 € 6,72 €
excl. VAT · 7,33 € incl. VAT
−10 % OUR TIP IN STOCK

CP0M0XM, EMAS, LED indicator blue

Cat. no.: CP0M0XM

CP0M0XM EMAS - LED indicator light, blue, 100-230V AC, 22 mm. Technical specifications, use and selection of variants.

In stock 3 ks
6,06 € 6,72 €
excl. VAT · 7,33 € incl. VAT
−10 % OUR TIP IN STOCK

CP0S0XS, EMAS, LED indicator yellow

Cat. no.: CP0S0XS

CP0S0XS EMAS - LED indicator light, yellow, 100-230V AC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
6,06 € 6,72 €
excl. VAT · 7,33 € incl. VAT
−10 % OUR TIP IN STOCK

CP0Y0XY, EMAS, LED indicator green

Cat. no.: CP0Y0XY

CP0Y0XY EMAS - LED indicator light, green, 100-230V AC, 22 mm. Technical specifications, use and selection of variants.

In stock 5 or more pcs
6,06 € 6,72 €
excl. VAT · 7,33 € incl. VAT

Prices include the recycling fee.

Signal lamps and LED strips

The indicator light informs the operator about the condition of the device; the LED strip creates a continuous light line. When selecting, start with the purpose: do you need to distinguish the state of individual circuits on a panel, display the status of a workshop, or illuminate a specific space? The same light colour does not necessarily mean the same electrical connection or suitability for a given application.

This guide explains selecting signals for the distribution board and control panel, and basic dimensioning of LED strip power. The specific voltage, dimensions, cover, and installation conditions are always determined by the documentation of the selected order variant.

Quick orientation in the menu

How to select panel indicator light

1. Determine the exact power supply and execution of the light element

Describe the voltage and AC, DC, or AC/DC designation from the project and the control documentation. The information '24 V' without specifying the type of voltage is not a complete specification. A variant intended only for DC cannot be automatically replaced with AC/DC; for single-phase operation, verify the specified polarity. A control with an integrated power supply, a separate light module, and a flat LED diode are different components.

The difference can be hidden in the short order code suffix. For example, manufacturer EMAS in the S series distinguishes between voltage and lighting implementations; therefore, parameters from one variant cannot be transferred to the entire series. When replacing an old signal, compare the entire code, not just the similarity of the terminal connector. See overview of S series variants from manufacturer EMAS.

2. Check mounting hole and space behind panel

The mounting diameter is not the same as the outer diameter of the terminal frame. The drawing must match the opening in the panel, the thickness of the material, the method of fixing, and the available depth. Also consider space for connecting cables and servicing. Two signal lights with the same mounting diameter may not be mechanically interchangeable without further control.

For industrial installation, verify if you are ordering a complete assembly, just the head, holder, or light block. The specification includes the type of connection: for example, screws, connector, or pulled cables according to the specific product.

3. Design the unambiguous importance of signalling

Determine the colour, permanent lighting, and any blinking based on the device function and machine documentation. On one panel, maintain a consistent meaning of statuses and provide a clear description. A good design test sounds like: does the new operator understand that the control means power presence, start command, actual operation, or fault? This information cannot be replaced.

Consider readability from the actual operating location, surrounding lighting, and viewing angle. A signalisation control does not confirm the safe state of the machine and does not replace the safety function designed for the given risk.

4. Check environment and electrical continuity

In the technical data sheet, look for operating temperature, declared cover, and conditions under which it applies. Distinguish requirements for the panel face and space for the enclosure. Outdoor operation, washing, oiling, or chemical environments cannot be resolved by just looking at the control appearance.

When controlling from PLC, compare the control voltage and supply with the output module parameters and its wiring diagram. It is not enough that both elements show 24 V. Also verify the output type, common potential, and behaviour in the off state. Wiring must follow the documentation of both devices.

Power supply LED strip: what CV and CC mean

CV (constant voltage) means a constant voltage source; CC (constant current) means a constant current source. A standard strip with its own current limit, for example for 24 V DC, requires corresponding voltage supply. The LED circuit itself without such a limit may require a current driver. The construction and documentation determine the load, not the general 'LED power source' designation.

For the current driver, check the specified current and output voltage range in which it operates. For the voltage source, check the output voltage and available current or power. At the same time, respect temperature conditions and any reduction of the source's permissible power at higher temperatures. Technical background explains LED wizard from MEAN WELL.

Calculation of power: illustrative example, not product parameter

Assume the band prescribed for 24 V DC, length 3 m and power input 9,6 W / m. This is a model input to explain the calculation, not a specification of all bands in this category.

  • Tape power: P = 3 × 9,6 = 28,8 W.
  • Current at the specified voltage: I = P / U = 28,8 / 24 = 1,2 A.
  • If the same source supplies additional loads, include their current consumption and any control electronics.

The calculated 28,8 W is the power of the specified strip, not an automatic final demand for the rated power of the source. The choice of a specific source must consider the tolerance of the supply, cooling conditions, and operating reserve according to the documentation. One universal reserve percentage does not solve all installations.

Lead length, voltage loss and dimming

For the base estimate: ΔU = I × R, where R is the total resistance of the current path. For example, with a current of 1,2 A and a total resistance of the forward and return paths 0,5 Ω, a voltage drop of 0,6 V occurs, i.e., 2,5 % of 24 V. This simplified calculation does not include the distribution of the supply along the strip. However, it shows why it is necessary to consider not just the source power, but also the wiring, connections, and maximum length of the segment specified by the manufacturer.

For mounting, the strip must be compatible, the power section of the regulator, and its control. PWM on the power output is not the same as the source input control. MEAN WELL for commonly limited strips describes the advantages of a suitable PWM output over simply changing the current amplitude; at the same time, it depends on the combination of load and driver. Details are provided application article on dimming LED stripsTherefore, select the method of regulation according to specific technical papers, not just the word "dimmable."

Common problems and what to check

  • The indicator light shall not be lit: verify the correct voltage variant, the type of power supply and the conformity of the connection with the documentation.
  • The indicator after the command to turn off the light is weak: One option is inconsistency between sensitive load and output behaviour in the off state. Assessment belongs to the documentation of the specific combination; do not add a randomly chosen resistor as a universal solution.
  • The end of the tape is different from the beginning: Check the length of section, line and connection points according to installation instructions. The cause may not be in LED itself.
  • The light flashes or turns off in a jump when dimming: check the permitted load, type of regulation and compatibility of individual parts.

What to send for selection or replacement

For the control, prepare the full order code or readable label, AC/DC voltage, required colour, opening dimensions, panel thickness, connection, and environmental conditions. For LED strips, add length, voltage, power per metre, regulation method, and lighting or signalisation requirement. With these data, you can solve selection of components without estimating unknown parameters.

Frequently asked questions

Is every LED signal a indicator light?

No. The signal marking describes the function, not the lamp technology. Verify the specific version in the technical sheet.

Does 22 mm mean that any 22 mm indicator light can be used?

No. The mounting dimension is only one condition. Compare fastening, depth, panel thickness, electrical parameters and delivery range.

Is it enough for LED strip to select the source by watts?

No. First, the mode of power supply and voltage or current must be agreed. Only then is power, temperature, regulation and installation conditions assessed.

The guide is for selecting components and does not replace the project or specific product manual. Installation and electrical verification must be carried out by a professionally skilled person with the device safely secured. Parameters of one variant cannot be generalised to the entire category.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.