D060DXK, EMAS, Red rectangle LED indicator, 16mm, 12- 24V AC / DC, IP50
D060DXK EMAS - LED indicator light, red, 12-24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
Rate 24,43 CZK per 1 EUR. Prices are indicative, invoicing is in Czech crowns.
Round, square and rectangular LED signals 16 mm.
D060DXK EMAS - LED indicator light, red, 12-24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D080DXS EMAS - LED indicator light, yellow, 12- 24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D060YXK EMAS - LED indicator light, red, 12-24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D080YXS EMAS - LED indicator light, yellow, 12- 24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D060KXK EMAS - LED indicator light, red, 12-24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D090KXY EMAS - LED indicator light, green, 12- 24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D070KXM EMAS - LED indicator, blue, 12-24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D080KXS EMAS - LED indicator light, yellow, 12- 24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D050DXB EMAS - LED indicator light, white, 12- 24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D090DXY EMAS - LED indicator light, green, 12-24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D070DXM EMAS - LED indicator, blue, 12- 24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D090YXY EMAS - LED indicator light, green, 12-24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D050YXB EMAS - LED indicator light, white, 12- 24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D070YXM EMAS - LED indicator, blue, 12- 24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
D050KXB EMAS - LED indicator light, white, 12- 24V AC / DC, 16 mm. Technical specifications, use and selection of variants.
Prices include the recycling fee.
For 16mm indicator lights it is necessary to distinguish the shape of the visible face from the size of the mounting hole. Round, square, and rectangular signal lights can belong to the same mounting group, but they may take up different space on the control panel. The exact dimensions of the housing and the space for connection often determine the availability of a replacement.
In this category, LED indicator lights are EMAS D series in several colours and front designs. D090YXY, D090KXY and D090DXYTheir product cards distinguish between round, square and rectangular appearance. The whole code is therefore important even with the same color and mounting dimension.
For the rectangular housing, also consider the orientation. Rotating the element changes the layout of the surface on the panel, not the electrical properties. The assembly drawing should capture the actual outlines of the elements, not just the centers of the mounting holes.
Consider two hypothetical elements with the width of the forehead 20 mm and 24 mm. If we want to leave a gap of 4 mm between their edges, the distance of the centres is geometrical at least 20/2 + 24/2 + 4 = 26 mmThe numbers are not the dimensions of the products EMAS; this is a model example why the pitch cannot be derived only from the hole 16 mm.
The actual required pitch may be larger due to rear blocks, cables, assembly tools or manufacturer's regulation. For design use the full dimensions of all adjacent components.
For each variant, compare the power range and AC/DC marking in the product documentation. Do not infer electrical parameters from the round or square housing. Also verify if the delivery is complete and which light block is part of the assembly.
When connecting to the control circuit, compare the load acceptance of the switch with the allowed output load. If controlled by PLC, verify the common potential and the schematic of the specific module. Dimming at off command may have multiple causes; without documentation, a universal repair element cannot be recommended.
Choosing the shape can help unify the appearance with other controllers, but it should not hinder functionality. For each switch, determine a clear meaning and description. The 'go' button illumination does not mean the same as 'confirmed operation'. If the operator needs to monitor the status from a distance or from multiple sides, consider also signalling beacon.
In the service documentation, record the entire order code, not just 'green switch 16 mm'. When replacing, this allows you to verify the same shape, voltage, connection, and delivery range without looking for it by photo.
No. The shape of the forehead and the mounting cut are two distinct figures. The correct opening provides a drawing of a specific model.
Only after verification of mounting, front and rear dimensions, power and connection. The same category size is not a confirmation of complete interchangeability.
For further dimensions use 14mm and 22mm indicatorGeneral principles summarise Technical signage guideInstallation and electrical verification belong to the competent person; this text does not replace the instructions of a particular product.
We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.
Choose which cookies we may use. You can change your choice at any time.
They keep the cart contents, your login and selected language, and protect forms from abuse. An order cannot be completed without them, so they are used even without consent.
Google Analytics shows us traffic and behaviour on the website in aggregated form. This tells us which pages are not working for people. We do not identify anyone from this data.