Phone +420 774 723 123 Cart · 0 · empty

Indicator lightss, mounting 14 mm

EMAS S140 panel signals for mounting hole 14 mm.

Filters
Found 5 products
OUR TIP IN STOCK

S140M2, EMAS, blue signal indicator

Cat. no.: S140M2

S140M2 EMAS - signalling indicator light, blue, 24V AC / DC. Technical specifications, use and selection of variants.

In stock 5 or more pcs
2,85 €
excl. VAT · 3,45 € incl. VAT
OUR TIP IN STOCK

S140B2, EMAS, white signal indicator

Cat. no.: S140B2

S140B2 EMAS - indicator light, white, 24V AC / DC. Technical specifications, use and selection of variants.

In stock 5 or more pcs
2,85 €
excl. VAT · 3,45 € incl. VAT
OUR TIP IN STOCK

S140K2, EMAS, red signal indicator

Cat. no.: S140K2

S140K2 EMAS - indicator light, red, 24V AC / DC. Technical specifications, use and selection of variants.

In stock 5 or more pcs
2,85 €
excl. VAT · 3,45 € incl. VAT
OUR TIP IN STOCK

S140Y2, EMAS, green signal indicator

Cat. no.: S140Y2

S140Y2 EMAS - signalling indicator light, green, 24V AC / DC. Technical specifications, use and selection of variants.

In stock 5 or more pcs
2,85 €
excl. VAT · 3,45 € incl. VAT
OUR TIP IN STOCK

S140S2, EMAS, yellow signal indicator

Cat. no.: S140S2

S140S2 EMAS - indicator light, yellow, 24V AC / DC. Technical specifications, use and selection of variants.

In stock 5 or more pcs
2,85 €
excl. VAT · 3,45 € incl. VAT

Prices include the recycling fee.

Indicator lightss, mounting 14 mm

The indicator light for the 14 mm aperture is intended to provide the operator with one clear device information. When designing a panel, you need to address not only the voltage and color, but also how the light actually confirms the status. The presence of control voltage, request for operation, and achievement of working position are three different pieces of information.

S140 series in this category

The range includes EMAS S140K2, S140Y2, S140S2, S140M2, and S140B2 controls in red, green, yellow, blue, and white implementations. The product data sheets for these variants specify 24 V AC/DC, a mounting hole of 14 mm, and IP50. Before ordering, compare the exact code and its documentation; the size of the category alone does not guarantee voltage or cover.

For example, S140K2 is a red variant while S140Y2 Green. The meaning of colours must be based on the design and documentation of your device, not just the availability of the colour.

What is 24 V AC / DC

The AC/DC designation specifies the specification for alternating current (AC) and direct current (DC) in the conditions stated by the manufacturer. It does not mean any voltage, automatic compatibility with all PLC outputs, or the function of a voltage meter. Tolerance of voltage, current draw, and connection are verified for the specific component.

If the buzzer is controlled by an electronic output, compare its type, load capacity, and common potential with the control connection. When multiple simultaneously glowing controls are involved, the total draw of a group of outputs and the source is also considered. The individual device schema takes precedence over the general assumption 'both are 24 V'.

How to create a well-readable panel signal

  1. Define information: Write with one sentence what the light is supposed to mean. For example, "the control circuit is powered" or "the mechanism has reached the end position."
  2. Select the correct signal source: the command from the control system is not automatically feedback from the mechanism.
  3. Complete description: The marking on the signal should correspond to the function and documentation of the machine. Avoid indefinite inscriptions, the meaning of which is known only by the original programmer.
  4. Verify legibility: assess the light from the normal operating position, in ambient lighting and in addition to other indicator lights.

Model example: green light with the description 'RUN' is activating if it merely copies the Start button press. The design must decide whether to indicate a request for operation or a confirmed operational status. It is not a property of the buzzer itself, but its proper integration into the system.

Mechanical check before ordering

  • Verify hole diameter by drawing, not by outer frame.
  • Compare the wall thickness, attachment and depth of the body.
  • Leave room for outlets, service and adjoining elements.
  • Check the operating environment and the conditions of the declared cover.

The 14 mm indicator light is not interchangeable without any other 10mm or 16mm versionThe front and rear dimensions may differ in addition to the opening.

Frequently asked questions

Does the light signal confirm the function of the connected machine?

Only if its control is actually designed and the signal is based on the corresponding state. The light itself does not distinguish the command from feedback.

Is the signal off by confirming a safe state?

No. Lights out can also be related to light element or supply failure. The indicator light does not replace safety measures or verification of hopeless condition.

For more information, see Technical signpost guidesBy selection of components Specify the full type, power supply, required function and installation restrictions.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.