Phone +420 774 723 123 Cart · 0 · empty

Indicator lightss, mounting 10 mm

Compact EMAS signals to 10 mm mounting hole.

Filters
Found 9 products
OUR TIP IN STOCK

S100K, EMAS, red signal indicator

Cat. no.: S100K

S100K EMAS - indicator light, red, 230V AC. Technical specifications, use and selection of variants.

In stock 5 or more pcs
1,77 €
excl. VAT · 2,14 € incl. VAT
OUR TIP IN STOCK

S100Y, EMAS, green signal indicator

Cat. no.: S100Y

S100Y EMAS - signalling indicator light, green, 230V AC. Technical specifications, use and selection of variants.

In stock 3 ks
1,77 €
excl. VAT · 2,14 € incl. VAT
OUR TIP IN STOCK

S100M, EMAS, indicator blue

Cat. no.: S100M

S100M EMAS - signalling indicator light, blue, 230V AC. Technical specifications, use and selection of variants.

In stock 5 or more pcs
1,77 €
excl. VAT · 2,14 € incl. VAT
OUR TIP IN STOCK

S100B, EMAS, white signal indicator

Cat. no.: S100B

S100B EMAS - signalling indicator light, white, 230V AC. Technical specifications, use and selection of variants.

In stock 5 or more pcs
1,77 €
excl. VAT · 2,14 € incl. VAT
OUR TIP IN STOCK

S100S, EMAS, yellow signal indicator

Cat. no.: S100S

S100S EMAS - signalling indicator light, yellow, 230V AC. Technical specifications, use and selection of variants.

In stock 5 or more pcs
1,77 €
excl. VAT · 2,14 € incl. VAT
OUR TIP IN STOCK

S100LK -50, EMAS, red signal indicator

Cat. no.: S100LK-50

S100LK -50 EMAS - indicator light, red, 230V AC, 0,5 m. Technical specifications, use and selection of variants.

In stock 5 or more pcs
2,22 €
excl. VAT · 2,69 € incl. VAT
OUR TIP IN STOCK

S100LM -50, EMAS, blue indicator

Cat. no.: S100LM-50

S100LM-50 EMAS - signalling indicator light, blue, 230V AC, 0,5 m. Technical specifications, use and selection of variants.

In stock 5 or more pcs
2,22 €
excl. VAT · 2,69 € incl. VAT
OUR TIP IN STOCK

S100LS-50, EMAS, yellow signal indicator

Cat. no.: S100LS-50

S100LS-50 EMAS - signalling indicator light, yellow, 230V AC. Technical specifications, use and selection of variants.

In stock 5 or more pcs
2,22 €
excl. VAT · 2,69 € incl. VAT
OUR TIP IN STOCK

S100LY50, EMAS, green signal indicator

Cat. no.: S100LY50

S100LY50 EMAS - signalling indicator light, green, 230V AC, 0,5 m. Technical specifications, use and selection of variants.

In stock 5 or more pcs
2,22 €
excl. VAT · 2,69 € incl. VAT

Prices include the recycling fee.

Indicator lightss, mounting 10 mm

The 10 mm mounting hole indicator lights are a solution for compact light indication in the panel. A small size does not indicate the power supply voltage: even a small buzzer can be intended for a network circuit. First compare the electrical installation and then the color and appearance.

What do you choose in this category

The offer includes EMAS signal series S100 in several colors and selected LED version with cable connections. S100LK-50for which the product card shows red light, LED, 230 V AC and silicone cable. Data about this model is not a universal parameter of each indicator light with 10 hole.

In the range of EMAS products, there are various voltage and construction variants. When replacing, keep the entire order code including the suffix and compare the documentation, not just the initial designation S100.

Why hole 10 mm not enough to confirm the refund

  • Front dimension: Verify the diameter of the frame and space between adjacent elements. The mounting hole does not indicate the size of the visible forehead.
  • Panel thickness: must satisfy the fixing of the specific indicator light. Also check the rear space for body and outlet.
  • Connection: Compare the design and length of the cable or type of clamps. The supply must not be mechanically subjected to inappropriate wiring during assembly.
  • Environment: Check the cover and temperature conditions according to the technical sheet. The material of the cable itself does not confirm the suitability of the whole indicator light to a hot or wet environment.

Power supply and meaning of its light

Distinguish between 230 V AC, low-voltage AC/DC variants, and possible DC implementation according to the specific product. A control for 230 V AC is not a direct replacement for a 24V buzzer controlled by a standard transistor output PLC. The required compatibility depends on the project and device schema, not mechanical similarity.

The meaning of the indication is equally important. A control connected to a specific circuit may indicate the presence of power on that circuit; it does not confirm the operation of the motor or the successful completion of the process. For an actual status indication, the signal must come from the corresponding feedback. The design separates 'command issued' from 'status confirmed'.

Lights out is not proof of a hopeless state. It may be defective or its supply may be interrupted. It does not replace the verification of the safe condition of the equipment prescribed by the procedure of the competent person.

Practical procedure for replacing an old signal

  1. From documentation and labelling, find out the full type and actual power supply. Do not estimate the voltage by size or color.
  2. Compare drawing, attachment, panel thickness and cable design.
  3. Check the required colour, light element technology and environmental conditions.
  4. Before confirming the refund, verify that the original control circuit corresponds to a new load.

Example decision: the request 'red control 10 mm' is incomplete. A usable specification must also include AC/DC voltage, connection, dimensional limits, and environment. The 230 V AC figure can be added to the specification only if it actually corresponds to the specific circuit.

Frequently asked questions

Is each indicator light S100 the same except color?

No. Verify the full order code and parameters of a particular variant; the series may include various light and voltage versions.

Can I consider a small 10mm indicator light low voltage?

The size and electrical voltage are independent data.

How to choose another mounting dimension?

Compare 14mm indicator or go to main signalling guideChange the aperture size only as part of the panel adjustment assessment.

For selection of the refund Prepare the label, photo, voltage and mounting drawing. The guide does not replace the manufacturer's instructions or the electrical project.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.