Phone +420 774 723 123 Cart · 0 · empty

Pneumatic tubes

Selecting the material, diameter and route of the tube

Subcategories

Filters
Found 105 products

TU0212BU-20, SMC, polyurethane tube, blue

Cat. no.: TU0212BU-20

TU0212BU-20 SMC – polyurethane tube, blue. The variant is intended for pneumatic distribution according to the stated dimensions and material.

On request
15,68 €
excl. VAT · 18,97 € incl. VAT

TU0212C-20, SMC, polyurethane tube, OD 2 mm / ID 1.2 mm, roll 20 m, clear

Cat. no.: TU0212C-20

TU0212C-20, SMC, polyurethane tube, OD 2 mm / ID 1.2 mm, roll 20 m, clear. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must…

On request
15,68 €
excl. VAT · 18,97 € incl. VAT

TIUB01B-20, SMC, polyurethane tube (inch)

Cat. no.: TIUB01B-20

TIUB01B-20 SMC – polyurethane tube (inch). The variant is intended for pneumatic distribution according to the stated dimensions and material.

On request
17,20 €
excl. VAT · 20,81 € incl. VAT

TIUB01BU-20, SMC, polyurethane tube (inch)

Cat. no.: TIUB01BU-20

TIUB01BU-20 SMC – polyurethane tube (inch). The variant is intended for pneumatic distribution according to the stated dimensions and material.

On request
17,20 €
excl. VAT · 20,81 € incl. VAT

T0425B-20, SMC, nylon tube

Cat. no.: T0425B-20

T0425B-20, SMC, nylon tube. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect the dimension, pressure, temperature and…

On request
17,60 €
excl. VAT · 21,30 € incl. VAT

T0425R-20, SMC, nylon tube

Cat. no.: T0425R-20

T0425R-20, SMC, nylon tube. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect the dimension, pressure, temperature and…

On request
17,60 €
excl. VAT · 21,30 € incl. VAT
OUR TIP

TU0604W-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, white

Cat. no.: TU0604W-20

TU0604W-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, white. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect…

On request
17,85 €
excl. VAT · 21,60 € incl. VAT

TU0604BU-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, blue

Cat. no.: TU0604BU-20

TU0604BU-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, blue. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect…

On request
17,85 €
excl. VAT · 21,60 € incl. VAT

TU0604C-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, clear

Cat. no.: TU0604C-20

TU0604C-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, clear. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect…

On request
17,85 €
excl. VAT · 21,60 € incl. VAT
OUR TIP

TU0604B-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, black

Cat. no.: TU0604B-20

TU0604B-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, black. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect…

On request
17,85 €
excl. VAT · 21,60 € incl. VAT

TU0604G-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, green

Cat. no.: TU0604G-20

TU0604G-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, green. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect…

On request
18,79 €
excl. VAT · 22,74 € incl. VAT

TU0604Y-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, yellow

Cat. no.: TU0604Y-20

TU0604Y-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, yellow. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect…

On request
18,79 €
excl. VAT · 22,74 € incl. VAT

TU0212B-20, SMC, polyurethane tube, black

Cat. no.: TU0212B-20

TU0212B-20 SMC – polyurethane tube, black. The variant is intended for pneumatic distribution according to the stated dimensions and material.

On request
18,83 €
excl. VAT · 22,79 € incl. VAT

TU0212R-20, SMC, polyurethane tube, red

Cat. no.: TU0212R-20

TU0212R-20 SMC – polyurethane tube, red. The variant is intended for pneumatic distribution according to the stated dimensions and material.

On request
18,83 €
excl. VAT · 22,79 € incl. VAT

TU0604R-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, red

Cat. no.: TU0604R-20

TU0604R-20, SMC, polyurethane tube, OD 6 mm / ID 4 mm, roll 20 m, red. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect…

On request
18,83 €
excl. VAT · 22,79 € incl. VAT

TIA01W-20, SMC, nylon tube

Cat. no.: TIA01W-20

TIA01W-20, SMC, nylon tube. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect the dimension, pressure, temperature and…

On request
22,72 €
excl. VAT · 27,49 € incl. VAT

T0604G-20, SMC, nylon tube

Cat. no.: T0604G-20

T0604G-20 SMC – nylon tube. The variant is intended for pneumatic distribution according to the stated dimensions and material.

On request
25,38 €
excl. VAT · 30,71 € incl. VAT

T0604B-20, SMC, nylon tube

Cat. no.: T0604B-20

T0604B-20 SMC – nylon tube. The variant is intended for pneumatic distribution according to the stated dimensions and material.

On request
25,38 €
excl. VAT · 30,71 € incl. VAT

TK-6, SMC, tube cutters

Cat. no.: TK-6

TK-6, SMC, tube cutters. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect the dimension, pressure, temperature and minimum…

On request
26,41 €
excl. VAT · 31,95 € incl. VAT

TK-2, SMC, tube cutters

Cat. no.: TK-2

TK-2, SMC, tube cutters. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect the dimension, pressure, temperature and minimum…

On request
26,41 €
excl. VAT · 31,95 € incl. VAT

TUZ0604BU-20, wear-resistant tube, SMC

Cat. no.: TUZ0604BU-20

TUZ0604BU-20, wear-resistant tube, SMC

On request
26,82 €
excl. VAT · 32,45 € incl. VAT

TU0805W-20, polyurethane tube, white, SMC

Cat. no.: TU0805W-20

TU0805W-20 – SMC polyurethane tube, diameter 8.0/5.0mm, length 20m, colour white. Intended for pneumatic compressed air distribution. Max. operating pressure 0.8 MPa, temperature –20 to +60 °C.

On request
33,16 €
excl. VAT · 40,13 € incl. VAT

TU0425B-100, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 100 m, black

Cat. no.: TU0425B-100

TU0425B-100, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 100 m, black. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must…

On request
33,37 €
excl. VAT · 40,37 € incl. VAT

T0806G-20, SMC, nylon tube

Cat. no.: T0806G-20

T0806G-20 SMC – nylon tube. The variant is intended for pneumatic distribution according to the stated dimensions and material.

On request
35,01 €
excl. VAT · 42,36 € incl. VAT

T0806W-20, nylon tube, SMC

Cat. no.: T0806W-20

T0806W-20, nylon tube, SMC

On request
35,21 €
excl. VAT · 42,60 € incl. VAT

Prices include the recycling fee.

Pneumatic tubes

Choose the tube as part of the whole route between the air source and the point of consumption. The medium, temperature, pressure, length, space and connection method are decisive. When replacing an old line, first copy the designation and measure both diameters. Neither colour nor similar appearance is a sufficient basis for an order.

The listing includes Pneuflex and SMC tubes, straight and coiled versions and cutting tools. The material branches include PU, PTFE and FEP; polyamide is also represented. Selection therefore starts with the operating specification, not the assumption that all items have the same properties.

Material according to the actual task

For a flexible line, assess Polyurethane PU tubes. Pneuflex for ester-based PU emphasises flexibility and abrasion resistance; for polyamide describes options for higher pressures and temperatures than PU. This is a characteristic of these families, not common limit values for all offered sizes.

If the specification includes a chemical medium or elevated temperature, compare Teflon tubes a Fluoropolymer FEP tubes. In the enquiry, state the specific substance, concentration, temperature and contact time. State separately whether the substance flows inside or is used for external cleaning. Only with these data can documentation of the suitability of the whole assembly be requested.

Two diameters, two selection questions

Compare the outer diameter with the requirements of the fitting, the inner diameter with the need for media flow. SMC TU/TIUB table states both dimensions separately and distinguishes metric and inch versions. In addition to the dimension, verify the prescribed material and tolerance; similar numbers in the catalogue do not by themselves prove interchangeability.

For the design, draw the route and mark every fitting, sheet-metal pass-through and change of direction. For each point, decide whether it must remain accessible for service. The drawing allows two routing variants to be compared before purchase and reveals unnecessary loops. For a moving workplace, consider separately Coiled polyurethane PU tubes according to the working reach actually needed.

Model calculation of internal volume

Let us consider, purely for tutorial purposes, two four-metre tubes with an inner diameter of 4 and 6 mm. The volume of the cylindrical space V = π × d² × L / 4 is approximately 50.3 and 113.1 ml. The second variant has 2.25 times larger internal volume. The calculation uses chosen dimensions, not the parameters of a specific product.

The result shows how much space the route itself contains. It does not determine the flow rate, pressure loss or response time. To assess them, add the actual working pressure, consumption and all local resistances. When changing the length, also recalculate the volume; do not compare a new line only by diameter.

Mounting and troubleshooting

According to the SMC mounting instructions disconnect the supply and release the residual pressure. Check for an undamaged square cut, insertion into the specified fitting and routing without tension or twisting. For preparing the ends, use Cutting pliers, knives.

In case of problems, record whether they occur permanently, during consumption, after warming up, or only in a certain position of the machine. Always check one branch at a time and record the changes made. This separates observation from assumption and avoids repeated tube replacement without finding the cause.

FAQ

Is it enough to keep the colour when replacing?

Use colour for your own clear marking. Determine the replacement by the full code, dimensions and documented conditions of use.

Can air consumption be determined from length and diameter?

The dimensions alone determine the geometric volume. Consumption also requires a description of the working cycle and pressure states; the stated model does not calculate it.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.