TPGJ10-08, TECHNOLINE, plug-in reducer Ø10mm→Ø8mm
- Our price excl. VAT
- 2,48 €
- incl. VAT 21 %
- 3,00 €
Minimum order 5 pcs — can only be ordered in multiples.
Description
TPGJ10-08, TECHNOLINE, plug-in reducer Ø10mm→Ø8mm
plug-in reducing adapterØ8mmup to 10bar−20 to +80°CTPGJ10-08 is a plug-in reducing adapter of the TPGJ series under the brand TECHNOLINE. The adapter TPGJ10-08 is inserted with a Ø10mm stem into a push-in port of the corresponding diameter; on the other side it accepts a Ø8mm tube. It is not a fitting for two loose tubes: one side requires an existing fitting.
How this element works
With a correctly square-cut tube, the integrated collet presses its outer sheath against the seal. The outer diameter of the tube is decisive, not its inner bore.
Technical parameters TPGJ10-08
| Parameter | Value |
|---|---|
| Order code | TPGJ10-08 |
| Manufacturer (brand) | TECHNOLINE |
| Product type | plug-in reducing adapter |
| Plug-in stem – into the fitting | Ø10mm |
| Push-in tube connection | Ø8mm |
| Type | reduced plug-in adapter |
| Maximum working pressure of the fitting | 1.0MPa (10bar) |
| Proof pressure | 3.0MPa (30bar), proof |
| Operating medium temperature | −20 to +80°C (composite fitting series) |
Mounting, correct routing and tube selection
Tube outer diameter Ø8mm is essential for the tightness of the push-in connection; the inner diameter affects the flow but does not determine the collet size. Cut the tube square, insert it up to the stop and mechanically verify retention.
Choose a suitable tube by the outer diameter Ø8mm; matching PU tubes are in the TECHNOLINE range.
For medium diameters, a compromise between mounting space, inner tube bore and losses in branches is important when selecting.
The maximum pressure of the fitting must not automatically be applied to the whole assembly: the tube, thread seal, temperature and any control elements are also decisive.
Why choose this particular version
TPGJ10-08 is a plug-in adapter that uses an existing push-in port instead of a new threaded connection. Its ø10mm stem enters the counterpart; a Ø8mm tube is connected on the other side. It allows the line diameter or direction to be changed without connecting two loose tubes.
What is decisive when selecting
One end replaces a piece of tube in the counterpart, the other connects the tube itself; when selecting, both dimensions must be checked separately. When choosing between sizes, compare not only the OD for the fitting, but also the actual inner diameter and length of the tube.
Where the fitting is used – connection examples
- Pneumatic cabinets: conversion of the outlet of an already fitted push-in fitting.
- Machine service: introducing a tube of a different size into an existing distribution.
- Robotic peripherals: routing air in a confined space around a work tool.
How to connect and check
- Distinguish the stem side from the push-in opening for the tube.
- Depressurise the circuit and verify the size of the push-in counterpart.
- Insert the stem into the correct fitting; insert the square-cut Ø8mm tube into the adapter.
- Check the retention of both joints, strain relief and tightness under pressure.
Note when selecting: The size of the plug-in stem is not automatically the same as the outer diameter of the connected tube.
Related products from the TECHNOLINE e-shop
- TPU08 – Straight fitting Ø8mm
Dimensionally related Ø8mm element with a different function or version; does not replace checking the whole assembly.
- TPV08 – Elbow fitting 90° Ø8mm
Dimensionally related Ø8mm element with a different function or version; does not replace checking the whole assembly.
- TPE08 – T-connector 3× Ø8mm
Same nominal Ø8mm, but it is a branch element; not a direct replacement.
- Straight fittings
Overview of possible push-in counterparts; verify the connection match according to the specific model.
Frequently asked questions – TPGJ10-08
Ø10mm denotes the plug-in stem into the existing fitting, Ø8mm the diameter of the connected tube.
For this variant, the outer diameter Ø8mm is decisive; the dimension must not be confused with the inner bore of the tube.
Technical parameters
| Objednací kód | TPGJ10-08 |
|---|---|
| Výrobce | TECHNOLINE |
| Hose diameter | 10mm |
Ask about this product
Related products
TPGJ08-04, TECHNOLINE, plug-in reducer Ø8mm→Ø4mm
TPGJ08-04
1,04 €
excl. VAT · 1,25 € incl. VAT
TPGJ10-06, TECHNOLINE, plug-in reducer Ø10mm→Ø6mm
TPGJ10-06
1,26 €
excl. VAT · 1,53 € incl. VAT
TPGJ12-08, TECHNOLINE, plug-in reducer Ø12mm→Ø8mm
TPGJ12-08
1,53 €
excl. VAT · 1,85 € incl. VAT
TPGJ06-04, TECHNOLINE, plug-in reducer Ø6mm→Ø4mm
TPGJ06-04
1,71 €
excl. VAT · 2,07 € incl. VAT
TPGJ08-06, TECHNOLINE, plug-in reducer Ø8mm→Ø6mm
TPGJ08-06
1,98 €
excl. VAT · 2,40 € incl. VAT