Phone +420 774 723 123 Cart · 0 · empty
IN STOCK
TPGJ06-04, TECHNOLINE, plug-in reducer Ø6mm→Ø4mm

TPGJ06-04, TECHNOLINE, plug-in reducer Ø6mm→Ø4mm

Cat. no.: TPGJ06-04
Manufacturer: TECHNOLINE
In stock 105 pcs
Our price excl. VAT
1,71 €
incl. VAT 21 %
2,07 €

Minimum order 5 pcs — can only be ordered in multiples.

Weight 0.01 kg
HS Code (Taric) 74122000
Country of origin CN

Description

TPGJ06-04, TECHNOLINE, plug-in reducer Ø6mm→Ø4mm

plug-in reducing adapterØ4mmup to 10bar−20 to +80°C

TPGJ06-04 is a plug-in reducing adapter of the TPGJ series under the brand TECHNOLINE. The adapter TPGJ06-04 is inserted with a Ø6mm stem into a push-in port of the corresponding diameter; on the other side it accepts a Ø4mm tube. It is not a fitting for two loose tubes: one side requires an existing fitting.

How this element works

With a correctly square-cut tube, the integrated collet presses its outer sheath against the seal. The outer diameter of the tube is decisive, not its inner bore.

Technical parameters TPGJ06-04

Parameter Value
Order code TPGJ06-04
Manufacturer (brand) TECHNOLINE
Product type plug-in reducing adapter
Plug-in stem – into the fitting Ø6mm
Push-in tube connection Ø4mm
Type reduced plug-in adapter
Maximum working pressure of the fitting 1.0MPa (10bar)
Proof pressure 3.0MPa (30bar), proof
Operating medium temperature −20 to +80°C (composite fitting series)

Mounting, correct routing and tube selection

Tube outer diameter Ø4mm is essential for the tightness of the push-in connection; the inner diameter affects the flow but does not determine the collet size. Cut the tube square, insert it up to the stop and mechanically verify retention.

Choose a suitable tube by the outer diameter Ø4mm; matching PU tubes are in the TECHNOLINE range.

A smaller tube outer diameter helps with routing in confined spaces; however, the actual flow capacity is determined by its inner bore and the joint design.

The maximum pressure of the fitting must not automatically be applied to the whole assembly: the tube, thread seal, temperature and any control elements are also decisive.

Why choose this particular version

TPGJ06-04 is a plug-in adapter that uses an existing push-in port instead of a new threaded connection. Its ø6mm stem enters the counterpart; a Ø4mm tube is connected on the other side. It allows the line diameter or direction to be changed without connecting two loose tubes.

What is decisive when selecting

One end replaces a piece of tube in the counterpart, the other connects the tube itself; when selecting, both dimensions must be checked separately. For small diameters, it is advisable to also check the risk of clogging the narrow tube bore and the small available mounting space.

Where the fitting is used – connection examples

  • Pneumatic cabinets: conversion of the outlet of an already fitted push-in fitting.
  • Machine service: introducing a tube of a different size into an existing distribution.
  • Robotic peripherals: routing air in a confined space around a work tool.

How to connect and check

  1. Distinguish the stem side from the push-in opening for the tube.
  2. Depressurise the circuit and verify the size of the push-in counterpart.
  3. Insert the stem into the correct fitting; insert the square-cut Ø4mm tube into the adapter.
  4. Check the retention of both joints, strain relief and tightness under pressure.

Note when selecting: The size of the plug-in stem is not automatically the same as the outer diameter of the connected tube.

Related products from the TECHNOLINE e-shop

  • TPU04 – Straight fitting Ø4mm

    Dimensionally related Ø4mm element with a different function or version; does not replace checking the whole assembly.

  • TPV04 – Elbow fitting 90° Ø4mm

    Dimensionally related Ø4mm element with a different function or version; does not replace checking the whole assembly.

  • Straight fittings

    Overview of possible push-in counterparts; verify the connection match according to the specific model.

Frequently asked questions – TPGJ06-04

What do two dimensions in the code mean?

Ø6mm denotes the plug-in stem into the existing fitting, Ø4mm the diameter of the connected tube.

What tube outer diameter corresponds to TPGJ06-04?

For this variant, the outer diameter Ø4mm is decisive; the dimension must not be confused with the inner bore of the tube.

Technical parameters

Objednací kódTPGJ06-04
VýrobceTECHNOLINE
Hose diameter6mm

Ask about this product

Ask us about technical parameters, compatibility with your equipment, availability or a price for larger quantities. It helps if you tell us what application you need the product for — if it does not fit, we will recommend a more suitable type.

Kód k opsání. Pokud ho nepřečtete, klikněte na Načíst nový kód.
The question relates to product TPGJ06-04

By sending you agree to the processing of the data provided for the purpose of handling your question. We do not pass the data on to third parties.

Related products

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.