Phone +420 774 723 123 Cart · 0 · empty

Elbow fittings

Elbow push-in fittings for changing the tube direction by 90°. Choose by tube diameter.

Filters
Found 67 products
OUR TIP IN STOCK

TPV04, TECHNOLINE, elbow fitting 90° for Ø4mm tube

Cat. no.: TPV04

TPV04, TECHNOLINE, elbow fitting 90° for Ø4mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

In stock 5 or more pcs · in multiples of 10 pcs
0,59 €
excl. VAT · 0,71 € incl. VAT
OUR TIP IN STOCK

TPV06, TECHNOLINE, elbow fitting 90° for Ø6mm tube

Cat. no.: TPV06

TPV06, TECHNOLINE, elbow fitting 90° for Ø6mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

In stock 5 or more pcs · in multiples of 10 pcs
0,63 €
excl. VAT · 0,76 € incl. VAT
OUR TIP IN STOCK

TPV08, TECHNOLINE, elbow fitting 90° for Ø8mm tube

Cat. no.: TPV08

TPV08, TECHNOLINE, elbow fitting 90° for Ø8mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

In stock 5 or more pcs · in multiples of 10 pcs
0,68 €
excl. VAT · 0,82 € incl. VAT
OUR TIP IN STOCK

TPV10, TECHNOLINE, elbow fitting 90° for Ø10mm tube

Cat. no.: TPV10

TPV10, TECHNOLINE, elbow fitting 90° for Ø10mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

In stock 5 or more pcs · in multiples of 10 pcs
0,72 €
excl. VAT · 0,87 € incl. VAT
OUR TIP IN STOCK

TPV12, TECHNOLINE, elbow fitting 90° for Ø12mm tube

Cat. no.: TPV12

TPV12, TECHNOLINE, elbow fitting 90° for Ø12mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

In stock 5 or more pcs · in multiples of 5 pcs
0,90 €
excl. VAT · 1,09 € incl. VAT
OUR TIP IN STOCK

TPV03C, TECHNOLINE, miniature elbow fitting 90° for Ø3mm tube

Cat. no.: TPV03C

TPV03C, TECHNOLINE, miniature elbow fitting 90° for Ø3mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Miniature version.

In stock 5 or more pcs · in multiples of 10 pcs
1,58 €
excl. VAT · 1,91 € incl. VAT
OUR TIP IN STOCK

TPV04C, TECHNOLINE, miniature elbow fitting 90° for Ø4mm tube

Cat. no.: TPV04C

TPV04C, TECHNOLINE, miniature elbow fitting 90° for Ø4mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Miniature version.

In stock 5 or more pcs · in multiples of 10 pcs
1,62 €
excl. VAT · 1,96 € incl. VAT
OUR TIP IN STOCK

TPV06C, TECHNOLINE, miniature elbow fitting 90° for Ø6mm tube

Cat. no.: TPV06C

TPV06C, TECHNOLINE, miniature elbow fitting 90° for Ø6mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Miniature version.

In stock 5 or more pcs · in multiples of 10 pcs
1,67 €
excl. VAT · 2,02 € incl. VAT
OUR TIP IN STOCK

TBPV04, TECHNOLINE, all-metal elbow fitting 90° for Ø4mm tube

Cat. no.: TBPV04

TBPV04, TECHNOLINE, all-metal elbow fitting 90° for Ø4mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Metal body.

In stock 5 or more pcs
1,98 €
excl. VAT · 2,40 € incl. VAT
OUR TIP IN STOCK

TPV16, TECHNOLINE, elbow fitting 90° for Ø16mm tube

Cat. no.: TPV16

TPV16, TECHNOLINE, elbow fitting 90° for Ø16mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

In stock 5 or more pcs · in multiples of 5 pcs
2,07 €
excl. VAT · 2,51 € incl. VAT
OUR TIP IN STOCK

TBPV06, TECHNOLINE, all-metal elbow fitting 90° for Ø6mm tube

Cat. no.: TBPV06

TBPV06, TECHNOLINE, all-metal elbow fitting 90° for Ø6mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Metal body.

In stock 5 or more pcs
2,30 €
excl. VAT · 2,78 € incl. VAT
OUR TIP IN STOCK

TBPV08, TECHNOLINE, all-metal elbow fitting 90° for Ø8mm tube

Cat. no.: TBPV08

TBPV08, TECHNOLINE, all-metal elbow fitting 90° for Ø8mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Metal body.

In stock 5 or more pcs
2,84 €
excl. VAT · 3,43 € incl. VAT
OUR TIP IN STOCK

TBPV10, TECHNOLINE, all-metal elbow fitting 90° for Ø10mm tube

Cat. no.: TBPV10

TBPV10, TECHNOLINE, all-metal elbow fitting 90° for Ø10mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Metal body.

In stock 5 or more pcs
3,56 €
excl. VAT · 4,30 € incl. VAT
OUR TIP IN STOCK

TBPV12, TECHNOLINE, all-metal elbow fitting 90° for Ø12mm tube

Cat. no.: TBPV12

TBPV12, TECHNOLINE, all-metal elbow fitting 90° for Ø12mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Metal body.

In stock 5 or more pcs
3,96 €
excl. VAT · 4,79 € incl. VAT

KQ2L08-99A, SMC, elbow fitting 90°, plug-in stem and tube Ø8mm

Cat. no.: KQ2L08-99A

KQ2L08-99A, SMC, elbow fitting 90°, plug-in stem and tube Ø8mm. A plug-in adapter into a push-in counterpart with a separate tube connection.

On request
2,13 €
excl. VAT · 2,58 € incl. VAT
OUR TIP

KQ2L02-M5A, SMC, elbow fitting 90°, tube Ø2mm, male M5

Cat. no.: KQ2L02-M5A

KQ2L02-M5A, SMC, elbow fitting 90°, tube Ø2mm, male M5. Elbow connection of the tube to threaded port M5; changes the line direction at the component.

On request
2,25 €
excl. VAT · 2,72 € incl. VAT

KQ2L06-00A, SMC, elbow fitting 90°, 2× tube Ø6mm

Cat. no.: KQ2L06-00A

KQ2L06-00A, SMC, elbow fitting 90°, 2× tube Ø6mm. Change of line direction by 90° without a sharp tube bend right at the joint.

On request
2,37 €
excl. VAT · 2,87 € incl. VAT

KQ2L04-06A, SMC, elbow reducing adapter 90°, tube Ø4mm / plug-in stem Ø6mm

Cat. no.: KQ2L04-06A

KQ2L04-06A, SMC, elbow reducing adapter 90°, tube Ø4mm / plug-in stem Ø6mm. Elbow reducer 90°: push-in tube Ø4mm, plug-in stem Ø6mm into the counterpart.

On request
2,58 €
excl. VAT · 3,12 € incl. VAT

KQ2L04-00A, SMC, elbow fitting 90°, 2× tube Ø4mm

Cat. no.: KQ2L04-00A

KQ2L04-00A, SMC, elbow fitting 90°, 2× tube Ø4mm. Change of line direction by 90° without a sharp tube bend right at the joint.

On request
2,66 €
excl. VAT · 3,22 € incl. VAT

KQ2L08-10A, SMC, elbow reducing adapter 90°, tube Ø8mm / plug-in stem Ø10mm

Cat. no.: KQ2L08-10A

KQ2L08-10A, SMC, elbow reducing adapter 90°, tube Ø8mm / plug-in stem Ø10mm. Elbow reducer 90°: push-in tube Ø8mm, plug-in stem Ø10mm into the counterpart.

On request
2,78 €
excl. VAT · 3,37 € incl. VAT

KQ2L06-99A, SMC, elbow fitting 90°, plug-in stem and tube Ø6mm

Cat. no.: KQ2L06-99A

KQ2L06-99A, SMC, elbow fitting 90°, plug-in stem and tube Ø6mm. A plug-in adapter into a push-in counterpart with a separate tube connection.

On request
2,87 €
excl. VAT · 3,47 € incl. VAT
OUR TIP

KQ2L04-01AS, SMC, elbow fitting 90°, tube Ø4mm, male R1/8

Cat. no.: KQ2L04-01AS

KQ2L04-01AS, SMC, elbow fitting 90°, tube Ø4mm, male R1/8. Elbow connection of the tube to threaded port R1/8; changes the line direction at the component. With pre-applied thread seal.

On request
3,07 €
excl. VAT · 3,71 € incl. VAT
OUR TIP

KQ2L04-02AS, SMC, elbow fitting 90°, tube Ø4mm, male R1/4

Cat. no.: KQ2L04-02AS

KQ2L04-02AS, SMC, elbow fitting 90°, tube Ø4mm, male R1/4. Elbow connection of the tube to threaded port R1/4; changes the line direction at the component. With pre-applied thread seal.

On request
3,07 €
excl. VAT · 3,71 € incl. VAT
OUR TIP

KQ2L04-M5A, SMC, elbow fitting 90°, tube Ø4mm, male M5

Cat. no.: KQ2L04-M5A

KQ2L04-M5A, SMC, elbow fitting 90°, tube Ø4mm, male M5. Elbow connection of the tube to threaded port M5; changes the line direction at the component.

On request
3,24 €
excl. VAT · 3,92 € incl. VAT
OUR TIP

KQ2L06-M6A, SMC, elbow fitting 90°, tube Ø6mm, male M6

Cat. no.: KQ2L06-M6A

KQ2L06-M6A, SMC, elbow fitting 90°, tube Ø6mm, male M6. Elbow connection of the tube to threaded port M6; changes the line direction at the component.

On request
3,24 €
excl. VAT · 3,92 € incl. VAT

Prices include the recycling fee.

Elbow fittings

Select elbow fittings with a sketch of the actual space around the connection. Not only the turning of the line is important, but also the type of both ends and the position of adjacent components. The range includes standard, miniature and all-metal Pneuflex versions and various SMC families. When comparing, follow the plan view of the whole assembly, not just the elbow itself.

Pneuflex for the PV family states a connection of two tubes of the same size at a right angle. Drawings KQ2L from SMC distinguish an elbow with two tube inlets and an elbow with a plug-in stem.

Direction and interface are two decisions

In your own selection sketch, mark the inlet axis, outlet axis and outline of obstacles. Add the connection type to each end. For the threaded version, require the full thread designation and information on the specific sealing method. For the plug-in version, draw the counterpart into which the stem is to enter. If you are only changing the direction of two tubes, do not automatically start by selecting a threaded variant; first assess the required interfaces.

Our own question for a confined space is: will it be possible to replace the tube after the adjacent part is fitted? Therefore add space for operating the connection and pulling out the line to the outline. If a change of direction is not necessary, compare Straight fittings. If the plug-in adapter is to change an existing connection, also go through Barb fittings.

For adjacent ports, draw a common plan view of all elbows. A part that is suitable on its own does not yet confirm that the whole row can be assembled. For your own design, compare the mounting order and two possible height levels of the lines. For each variant, go through the tool path and the tube path during replacement. The envelope of simultaneously fitted components is decisive, which you will not see in a catalogue photo of a single piece.

Our own model of space reserve

Let us consider an explicitly hypothetical corner in which the designer reserved a dimension of 45 mm in both directions from the intersection of the axes for routing in an arc. An alternative model elbow has an outline up to 21 mm from the same intersection. The difference between the two plan envelopes is 45 − 21 = 24 mm on each axis. If we also set a service reserve of 10 mm, we need 21 + 10 = 31 mm for the elbow variant. All dimensions are our own assumptions, not the tube bending radius or dimensions of a specific fitting. The result compares space; it says nothing about pressure loss or permissible movement.

Mounting with verified reference points

For your own mounting preparation, mark on the drawing from which point the height and lateral overhang are measured. Before intervention, verify the safe state of the system and zero pressure in the section being changed. After placing the part, compare the design orientation with the position of the surrounding holders. If a change of connection size is also needed, evaluate it separately via Reducing fittings. Adding another part to the sketch must update the spatial balance.

Pneuflex for PV describes inserting the tube and disconnecting it by pressing the collet. For the specific elbow, verify access to both control points.

Diagnostics according to the circumstances of the symptom

For service, record whether the problem appeared after turning the assembly, after fixing the line or after replacing the counterpart. Distinguish a symptom on the tube side from a symptom on the threaded side. Your own comparison procedure should keep the same route and always change one verified part. If only the position of the surrounding holder differs, record this change too. Without an axis sketch, it is difficult to tell whether a selection error or an arrangement error is recurring.

FAQ

Does an elbow shape mean the possibility of continuous rotation?

Define the required movement separately. Setting the position during mounting and repeated rotation during operation are different requirements that must be confirmed by the documentation of the specific version.

Is the tube dimension alone decisive?

Add the counterpart and a spatial sketch to the dimension. Two elbows for the same line can have different types of ends and thus require a different assembly.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.