Phone +420 774 723 123 Cart · 0 · empty

Elbow fittings

Elbow push-in fittings for changing the tube direction by 90°. Choose by tube diameter.

Filters
Found 67 products
OUR TIP

KQ2L12-02AS, SMC, elbow fitting 90°, tube Ø12mm, male R1/4

Cat. no.: KQ2L12-02AS

KQ2L12-02AS, SMC, elbow fitting 90°, tube Ø12mm, male R1/4. Elbow connection of the tube to threaded port R1/4; changes the line direction at the component. With pre-applied thread seal.

On request
6,59 €
excl. VAT · 7,97 € incl. VAT
OUR TIP

KQ2L12-03AS, SMC, elbow fitting 90°, tube Ø12mm, male R3/8

Cat. no.: KQ2L12-03AS

KQ2L12-03AS, SMC, elbow fitting 90°, tube Ø12mm, male R3/8. Elbow connection of the tube to threaded port R3/8; changes the line direction at the component. With pre-applied thread seal.

On request
6,67 €
excl. VAT · 8,07 € incl. VAT

KQ2L12-00A, SMC, elbow fitting 90°, 2× tube Ø12mm

Cat. no.: KQ2L12-00A

KQ2L12-00A, SMC, elbow fitting 90°, 2× tube Ø12mm. Change of line direction by 90° without a sharp tube bend right at the joint.

On request
6,96 €
excl. VAT · 8,42 € incl. VAT
OUR TIP

KQ2L12-04AS, SMC, elbow fitting 90°, tube Ø12mm, male R1/2

Cat. no.: KQ2L12-04AS

KQ2L12-04AS, SMC, elbow fitting 90°, tube Ø12mm, male R1/2. Elbow connection of the tube to threaded port R1/2; changes the line direction at the component. With pre-applied thread seal.

On request
7,29 €
excl. VAT · 8,82 € incl. VAT

KQ2LE06-00A, SMC, elbow bulkhead fitting, tube Ø6mm on both sides

Cat. no.: KQ2LE06-00A

KQ2LE06-00A, SMC, elbow bulkhead fitting, tube Ø6mm on both sides. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

On request
7,45 €
excl. VAT · 9,01 € incl. VAT
OUR TIP

KQ2L12-02N, SMC, elbow fitting 90°, tube Ø12mm, male R1/4

Cat. no.: KQ2L12-02N

KQ2L12-02N, SMC, elbow fitting 90°, tube Ø12mm, male R1/4. Elbow connection of the tube to threaded port R1/4; changes the line direction at the component.

On request
7,57 €
excl. VAT · 9,16 € incl. VAT

KQ2LE08-00A, SMC, elbow bulkhead fitting, tube Ø8mm on both sides

Cat. no.: KQ2LE08-00A

KQ2LE08-00A, SMC, elbow bulkhead fitting, tube Ø8mm on both sides. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

On request
7,86 €
excl. VAT · 9,51 € incl. VAT

KQ2D10-00A, SMC, three-way delta manifold, 3× tube Ø10mm

Cat. no.: KQ2D10-00A

KQ2D10-00A, SMC, three-way delta manifold, 3× tube Ø10mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

On request
8,39 €
excl. VAT · 10,15 € incl. VAT

KQ2VD06-02AS, SMC, elbow double manifold with thread, tube Ø6mm, male R1/4

Cat. no.: KQ2VD06-02AS

KQ2VD06-02AS, SMC, elbow double manifold with thread, tube Ø6mm, male R1/4. Air branching from threaded port R1/4 into several tube outlets. With pre-applied thread seal.

On request
11,05 €
excl. VAT · 13,37 € incl. VAT
OUR TIP

KQ2L16-04AS, SMC, elbow fitting 90°, tube Ø16mm, male R1/2

Cat. no.: KQ2L16-04AS

KQ2L16-04AS, SMC, elbow fitting 90°, tube Ø16mm, male R1/2. Elbow connection of the tube to threaded port R1/2; changes the line direction at the component. With pre-applied thread seal.

On request
11,34 €
excl. VAT · 13,72 € incl. VAT

KQ2VD08-04AS, SMC, elbow double manifold with thread, tube Ø8mm, male R1/2

Cat. no.: KQ2VD08-04AS

KQ2VD08-04AS, SMC, elbow double manifold with thread, tube Ø8mm, male R1/2. Air branching from threaded port R1/2 into several tube outlets. With pre-applied thread seal.

On request
12,69 €
excl. VAT · 15,35 € incl. VAT

KQ2VT06-02A, SMC, elbow triple manifold with thread, tube Ø6mm, male R1/4

Cat. no.: KQ2VT06-02A

KQ2VT06-02A, SMC, elbow triple manifold with thread, tube Ø6mm, male R1/4. Air branching from threaded port R1/4 into several tube outlets.

On request
14,53 €
excl. VAT · 17,58 € incl. VAT

KQ2ZD06-03AS, SMC, four-way threaded manifold, tube Ø6mm, male R3/8

Cat. no.: KQ2ZD06-03AS

KQ2ZD06-03AS, SMC, four-way threaded manifold, tube Ø6mm, male R3/8. Air branching from threaded port R3/8 into several tube outlets. With pre-applied thread seal.

On request
14,90 €
excl. VAT · 18,03 € incl. VAT

KQ2VT06-02AS, SMC, elbow triple manifold with thread, tube Ø6mm, male R1/4

Cat. no.: KQ2VT06-02AS

KQ2VT06-02AS, SMC, elbow triple manifold with thread, tube Ø6mm, male R1/4. Air branching from threaded port R1/4 into several tube outlets. With pre-applied thread seal.

On request
14,94 €
excl. VAT · 18,08 € incl. VAT
OUR TIP

KQ2UD04-06A, SMC, pneumatic push-in fitting plastic U-type, pack of 10 pcs

Cat. no.: KQ2UD04-06A

KQ2UD04-06A, SMC, pneumatic push-in fitting plastic U-type, pack of 10 pcs. A pneumatic fitting connects a tube to another element of the distribution or connects two tubes. The tube diameter…

On request
15,31 €
excl. VAT · 18,52 € incl. VAT
OUR TIP

KQ2UD06-08A, push-in fitting, SMC - pack of 10 pcs

Cat. no.: KQ2UD06-08A

pneumatic push-in fitting plastic U-type; SMC

On request
15,31 €
excl. VAT · 18,52 € incl. VAT

KQG2L08-03S, SMC, stainless steel elbow fitting 316, tube Ø8mm, thread R3/8

Cat. no.: KQG2L08-03S

KQG2L08-03S, SMC, stainless steel elbow fitting 316, tube Ø8mm, thread R3/8. Elbow connection of the tube to threaded port R3/8 male; changes the line direction at the component.

On request
29,47 €
excl. VAT · 35,66 € incl. VAT

Prices include the recycling fee.

Elbow fittings

Select elbow fittings with a sketch of the actual space around the connection. Not only the turning of the line is important, but also the type of both ends and the position of adjacent components. The range includes standard, miniature and all-metal Pneuflex versions and various SMC families. When comparing, follow the plan view of the whole assembly, not just the elbow itself.

Pneuflex for the PV family states a connection of two tubes of the same size at a right angle. Drawings KQ2L from SMC distinguish an elbow with two tube inlets and an elbow with a plug-in stem.

Direction and interface are two decisions

In your own selection sketch, mark the inlet axis, outlet axis and outline of obstacles. Add the connection type to each end. For the threaded version, require the full thread designation and information on the specific sealing method. For the plug-in version, draw the counterpart into which the stem is to enter. If you are only changing the direction of two tubes, do not automatically start by selecting a threaded variant; first assess the required interfaces.

Our own question for a confined space is: will it be possible to replace the tube after the adjacent part is fitted? Therefore add space for operating the connection and pulling out the line to the outline. If a change of direction is not necessary, compare Straight fittings. If the plug-in adapter is to change an existing connection, also go through Barb fittings.

For adjacent ports, draw a common plan view of all elbows. A part that is suitable on its own does not yet confirm that the whole row can be assembled. For your own design, compare the mounting order and two possible height levels of the lines. For each variant, go through the tool path and the tube path during replacement. The envelope of simultaneously fitted components is decisive, which you will not see in a catalogue photo of a single piece.

Our own model of space reserve

Let us consider an explicitly hypothetical corner in which the designer reserved a dimension of 45 mm in both directions from the intersection of the axes for routing in an arc. An alternative model elbow has an outline up to 21 mm from the same intersection. The difference between the two plan envelopes is 45 − 21 = 24 mm on each axis. If we also set a service reserve of 10 mm, we need 21 + 10 = 31 mm for the elbow variant. All dimensions are our own assumptions, not the tube bending radius or dimensions of a specific fitting. The result compares space; it says nothing about pressure loss or permissible movement.

Mounting with verified reference points

For your own mounting preparation, mark on the drawing from which point the height and lateral overhang are measured. Before intervention, verify the safe state of the system and zero pressure in the section being changed. After placing the part, compare the design orientation with the position of the surrounding holders. If a change of connection size is also needed, evaluate it separately via Reducing fittings. Adding another part to the sketch must update the spatial balance.

Pneuflex for PV describes inserting the tube and disconnecting it by pressing the collet. For the specific elbow, verify access to both control points.

Diagnostics according to the circumstances of the symptom

For service, record whether the problem appeared after turning the assembly, after fixing the line or after replacing the counterpart. Distinguish a symptom on the tube side from a symptom on the threaded side. Your own comparison procedure should keep the same route and always change one verified part. If only the position of the surrounding holder differs, record this change too. Without an axis sketch, it is difficult to tell whether a selection error or an arrangement error is recurring.

FAQ

Does an elbow shape mean the possibility of continuous rotation?

Define the required movement separately. Setting the position during mounting and repeated rotation during operation are different requirements that must be confirmed by the documentation of the specific version.

Is the tube dimension alone decisive?

Add the counterpart and a spatial sketch to the dimension. Two elbows for the same line can have different types of ends and thus require a different assembly.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.