K50APT2GRCQ, Banner, mounting sensor, capacity button, 3096694
- Our price excl. VAT
- 153,74 €
- incl. VAT 21 %
- 186,03 €
Description
K50APT2GRCQ, Banner, mounting sensor, capacity button, 3096694
K50APT2GRCQ is capacity / optical pick-to-light sensor manufacturer Banner. The description is prepared for unambiguous identification via order code and for practical selection of the correct variant.
For industrial control and signalling components, similarly looking products may have different contacts, voltages, colours, switching programs, protection ratings or connectors. Therefore, verified technical data are separated from general usage information below.
Functions and Principle
The product is designed for industrial control, signalling or automation according to specific design. Verify the suitability for application according to the exact ordering code and technical specifications.
Typical Applications
The product is used in industrial machines, switchgear, production lines and local control or signalling locations according to its specific function. Before installation, verify the working environment, mechanical stress, required switching frequency and compatibility with the control system.
Technical Parameters
| Order Code | K50APT2GRCQ |
|---|---|
| Manufacturer | Banner |
| Product Type | capacity / optical pick-to-light sensor |
| Product Series | Banner K30/K50 Pick-to-Light |
| Power | 12-30 V DC |
| Body | polycarbonate |
| Covering | IP67 / IP69K |
| Output | PNP, NO |
| Colours | green / red |
| Connection | 5pin M12 |
| Diameter | 50 mm |
| Colour | red |
Installation and Wiring
Before installation, compare the hole, thread, dimensions or mounting base. Electrical connections should be made only after checking the supply voltage, contacts or inputs/outputs. After installation, perform a functional test in all operating conditions.
How to Select the Correct Variant
Compare the entire order code, mechanical construction and all electrical parameters listed in the table.
Compatibility and Accessories
Select compatible cables, contact blocks, light modules, enclosures or mounting parts according to the same product series and specific mechanical construction. For modular systems, verify that individual parts belong to the same series.
Operation and Service
During regular maintenance, check mechanical fastening, terminals or connectors and correct functioning of signalling or switching. When replacing, record the order code, voltage, contact scheme and other parameters of the specific variant.
Source and Quality of Data
Technical data are compiled from source export TECHNOLINE and public official product materials Banner Engineering for K30/K50/K80 series. Unverified parameters are not intended.
If any parameter is not listed in the table, it was not clearly confirmed in the available source for the specific variant and was not assumed into the description.
Frequently asked questions
What is K50APT2GRCQ per product?
This is the capacity / optical pick-to-light sensor of the Banner manufacturer. The exact design of the specific variant is shown in the technical table.
How to verify the correct K50APT2GRCQ variant?
Compare the entire order number, product series, electrical parameters and mechanical construction.
What to check before ordering?
Compare the entire order code, mechanical construction and all electrical parameters listed in the table.
Why is a similar appearance insufficient?
The same product series may contain variants with different voltages, contacts, colours, connectors, protection ratings or switching programs.
How to install the product?
Install according to the mechanical construction and manufacturer documentation. Before connection, verify the power supply, contacts, connector and safe disconnection of the equipment.
How to wire the product?
Wiring is governed by the specific variant. Always check the contact scheme or inputs/outputs and rated voltage before connection.
Can another variant from the same series be used?
Only if the electrical function, mounting and required parameters match. Do not assess interchangeability solely based on photographs or basic names.
What is important during service?
Note down the exact order code and key parameters in the service documentation; this will facilitate future replacement.
From which sources is the description created?
Technical data are compiled from source export TECHNOLINE and public official product materials Banner Engineering for K30/K50/K80 series. Unverified parameters are not intended.
What if one of the parameters is missing?
The parameter was not clearly documented in the available sources. Verify it in the detailed datasheet of the specific variant before application.
Technical parameters
| Objednací kód | K50APT2GRCQ |
|---|---|
| Výrobce | Banner |
Ask about this product
Related products
IF03N024MS30-1, EMAS, five- colour LED signalling beacon 50 mm, colors red + green + yellow + blue + white, permanent light, 24 V DC, IP67, NPN PLC, cable 1 m
IF03N024MS30-1
38,84 €
excl. VAT · 47,00 € incl. VAT
IF03P024MS30-1, EMAS, five-colour LED signalling Beacon 50 mm, color red + green + yellow + blue + white, permanent light, 24 V DC, IP67, PNP PLC, cable 1 m
IF03P024MS30-1
38,84 €
excl. VAT · 47,00 € incl. VAT
IF03P024OS30-1, EMAS, five-colour LED signalling Beacon 50 mm, colours red + green + yellow + blue + white, permanent light, 24 V DC, IP67, PNP PLC, cable 1 m
IF03P024OS30-1
38,84 €
excl. VAT · 47,00 € incl. VAT
TE-IF03P024MS30-1, EMAS, five- colour LED signalling beacon 50 mm, colors red + green + yellow + blue + white, permanent light, 24 V DC, IP67, PNP PLC, cable 1 m, with mounting foot TECHNOLINE
TE-IF03P024MS30-1
42,85 €
excl. VAT · 51,85 € incl. VAT
TE-IF03N024MS30-1, EMAS, five- colour LED signalling beacon 50 mm, colors red + green + yellow + blue + white, permanent light, 24 V DC, IP67, NPN PLC, cable 1 m, with mounting foot TECHNOLINE
TE-IF03N024MS30-1
42,85 €
excl. VAT · 51,85 € incl. VAT