TC-02, TECHNOLINE, pliers for cutting pneumatic tubes
- Our price excl. VAT
- 13,24 €
- incl. VAT 21 %
- 16,02 €
Description
TC-02, TECHNOLINE, pliers for cutting pneumatic tubes
Pliers TC-02 are used for cutting pneumatic tubes. To ensure the tightness of a push-in fitting, a straight, square and undamaged cut of the tube end is important.
Technical data
| Parameter | Value |
|---|---|
| Code | TC-02 |
| Manufacturer | TECHNOLINE |
| Function | Cutting pneumatic tubes |
| Working pressure / bending radius | Not relevant for the tool |
| Maximum outer diameter of the tube to be cut | Ø16mm |
Safe cutting
Before cutting, depressurise the line and disconnect the tube from the energy source. The cut must be square to the tube axis, without burrs and without crushing the wall. After pushing into the fitting, check the seating and tightness of the connection.
Why a square cut matters
A push-in fitting seals on the outer surface of the tube. A slanted cut can reduce the insertion length or damage the seal during mounting. An insufficiently inserted tube may leak or come loose under pressure.
Related pneumatic accessories
Straight push-in fittings a Elbow fittings – selection according to the diameter of the cut tube.
FAQ
They easily flatten the tube or create a slanted end, which makes proper sealing difficult.
The TC-02 pliers allow cutting of pneumatic tubes with an outer diameter of up to Ø16mm.
Technical parameters
| Objednací kód | TC-02 |
|---|---|
| Výrobce | TECHNOLINE |

