Economic beacons - diameter 70mm EMAS (IP54)
When selecting an EMAS signal light with a diameter of 70 mm, first decide whether you need to replace an individual part of the existing pole or install a new workplace. In this branch, you encounter color modules IKM7 without LED bulbs, acoustic modules, and ready light assemblies. To purchase the entire light, proceed to the category. Assembled signal lights. When repairing, note the complete designation of the original part before selection.
What to specify before ordering
Write the required states of the machine, their colors, and the method of warning. Distinguish a permanent indication of a running process from a warning that calls the operator's attention. Each color used must have a unique meaning in the workplace documentation; any spare parts should be included in the drawing and schema to avoid unclear expectations. Also decide whether the operator will see the light from the workplace or if you need to address its location above an obstacle.
Check the power supply for each electrical component individually. The code of the coloured housing does not resolve the voltage of the inserted bulb or the acoustic module. For adding the light source, use LED bulbs up to 50mm and 70mm beacons Emas. Before connecting directly to the control output, compare its voltage, rated current, and common ground connection with the documentation of the selected assembly.
Assembly and compatibility limits
Connecting parts of the IK series by installing and rotating describes EMAS (page 76). When servicing, disconnect the power, maintain the orientation of the connections, and do not pull the cable into the contacts. Before securing, verify the clearance of the openings, space for the drive, and access to the column disassembly. The same diameter alone does not prove compatibility with another product line.
The IP54 rating in the category name does not replace the documentation for the specific product and its assembly. When selecting, also consider the base, end, and cable input. If the specification requires IP65, compare the specific implementation in the branch Economic beacons - diameter 70mm EMAS (IP65); replacing a single part does not constitute proof of coverage for the entire assembly.
Model example selection
The assembly station should display the cycle progress and the request for operator intervention. The designer first assigns a separate signal to each state, determines the required lighting behavior, and compares the completed assembly with the part list. Before ordering, specify the pickup height and power. When receiving, test each signal individually and check that the operator recognizes it even under normal lighting conditions.
Frequently Asked Questions
Is it enough to buy a color module for repair?
First determine if the cover, light source, or drive is damaged. The range of the replacement part must match the identified defect. The part list overview Individual modules and accessories.
Can the beacon secure a secure stop?
No. It is used for operational signalling; it is not a safety device and does not replace the safety function of the machine.