Assembled signal lights
Select finished signal lamps EMAS 70 mm as a specific combination of light function, voltage, and mechanical construction. The list of this category distinguishes the number of color blocks, continuous or intermittent light, and the presence of acoustics. It belongs to the branch Economic beacons - diameter 70mm EMAS (IP54)For compares, prepare an overview of the conditions to be displayed by the workplace.
Select function before order code
Assign a color to each required state and decide whether the light should glow continuously or blink. In the catalog, you can find, for example, red constructions TE-IK71L024XM03-R and TE-IK71F024XM03-R for 24 V AC/DC, the second with blinking. The options for the lighting function of the series IK describe also EMAS catalogue (p. 76); always assess the particular assembly according to its full designation.
Select the acoustic part according to the required response from the service. Consider when the sound should be played, who will confirm it, and how a persistent fault will be signaled after confirmation. These relationships belong to workplace control; purchasing a finished signal lamp does not determine it. Verify the number of required control signals and electrical options of the relevant outputs for connection.
Power supply, attachment and cover
Before ordering, compare the voltage information with the circuit to which the lamp will be connected. The same color or similar order code does not guarantee electrical interchangeability. For connections to PLC, check the documentation of the specific assembly, including the common wire and subscription. Transfer the entire code to the service list to ensure that a replacement in the future retains the light function.
For a finished product, check the installation dimensions, contents of the delivery, and cable routing. Choose a location where the service will not obstruct the machine cover or material storage. Before securing, prepare access to the lead-in and the option for future part replacement. Disconnect power during installation and mark the finished connection according to the machine documentation.
The cover is related to the specific ordered variant and prescribed fixing. To request IP65 compare Compound beacons in IP65 branchAny service exchange LED filament lamp must maintain adequate execution; its designation shall not give rise to the coverage of the whole beacon.
Model example
On the assembly bench, the maintenance staff should be informed of the fault condition requiring action according to the prescribed procedure. The project specifies a blinking red signal and defines its meaning in the documentation. For comparison, you can start with the variant TE-IK71F024XM03-R. Before use, it is necessary to verify its installation and connection. The switching test should include turning on the signal, confirming it, and its behavior after power restoration.
Frequently Asked Questions
Is a horn part of every routine?
Verify acoustics for a specific item; it is also distinguished by a category filter.
Does the complete assembly provide a security function?
No. The beacon informs about the operating condition and is not a safety device.