Assembled signal lights
Select a finished assembly according to operational states and machine operation. This category distinguishes one to four color blocks, continuous or intermittent light, and operation with acoustic signalling or without. Power filters include 24V AC/DC and 230V AC. Filters narrow down the selection; the final decision is made by checking the specific item.
What to check for the whole order code
Transfer the prefix, voltage information, and end color to the sample without changing them. Assemblies IK5 and TE-IK5 should not be assessed solely based on similarity of name. If the documentation describes a different implementation, it cannot automatically transfer the delivery range, electrical connections, or cover of the ordered product.
EMAS Technical Sheet IK51L220XM 03 gives 50mm column and mounting with 100mm tube. This information belongs to that code.
In the assembly drawing, separate the height of the mounting from the height of the optical part. Also check the cable passage and the connection location. A complete lamp does not necessarily mean a finished cable harness with a connected connector. Before drilling, determine the position of the screw and the method of accessing the connections for future replacement.
Number of colours and light function
For each color block, write one piece of information that the operator must recognize. Then compile a list of required commands and compare it with the product's schematic. For an intermittent light, verify which part creates the flashing; do not assume you can arbitrarily change its rhythm in the PLC program.
For the version with sound, determine when it should sound and whether it must be muted when the light is on. Separate sound control must allow specific connections. The switch must include repeating the event upon confirmation to prevent a muted signal from not responding to a new request.
Model example: two information on conveyor
The model traffic light needs to display the normal operation and the request to remove the finished product. The designer selects two separate light positions and prepares a table of their commands. If the operator is still on-site, first consider the solution without sound. A prepared design should be verified with actual lighting and closed covers. Voltage should be chosen according to the specific circuit, not based on which plug is closest.
When receiving, go through both states separately and their allowed combination. Also verify the behavior upon device activation. Only then write the resulting code and connections into the machine documentation. The example outlines the selection process, not a universal color convention.
Frequently asked questions
What if I only need to change one floor later?
Continue to Individual modules and accessories and select according to the actual delivery. A similar color is not enough to determine a replacement.
Just add another ending for a more challenging environment?
The change of a single part does not justify the new cover of the whole. Compare Compound beacons in IP65 branch and their installation conditions.
Is this column a safety device?
It's used for operational signalling. Classification Economic beacons - diameter 50mm EMAS (IP54) does not constitute a proof of a safety function or common parameters of all assemblies.