Pneumatic tubes

Pneumatic tubes for compressed air distribution – polyurethane, nylon, coiled, Teflon and FEP. Choose by outside diameter, material, working pressure and temperature and whether the tube will be moving. You will also find pliers and knives for cutting tubes here.

Podkategorie

Filtry
Znaleziono 105 produktów
NASZA PORADA DOSTĘPNY

TC-02, TECHNOLINE, pliers for cutting pneumatic tubes

Nr kat.: TC-02

TC-02, TECHNOLINE, pneumatic tube pliers up to Ø16mm. A square cut makes it easier to seal the tube in a push-in fitting.

Dostępny 5 i więcej szt.
13,26 €
bez VAT · 16,05 € z VAT
−5 % NASZA PORADA DOSTĘPNY

PUC 10x6.5 15M BL, TECHNOLINE, coiled polyurethane pneumatic tube, 10×6.5mm, working length 15m, blue

Nr kat.: PUC 10x6,5 15M BL

PUC 10x6.5 15M BL, TECHNOLINE, coiled PU tube 10×6.5mm, blue, working length 15m and free ends. Working pressure 10bar, temperature −20 to +60°C.

Dostępny 5 i więcej szt.
17,57 € 18,49 €
bez VAT · 21,26 € z VAT
−10 % NASZA PORADA DOSTĘPNY

PUC12x8-10BL, TECHNOLINE, coiled polyurethane pneumatic tube, 12×8mm, working length 10m, blue

Nr kat.: PUC12x8-10BL

PUC12x8-10BL, TECHNOLINE, coiled PU tube 12×8mm, blue, working length 10m and free ends. Working pressure 10bar, temperature −20 to +60°C.

Dostępny 5 i więcej szt.
17,90 € 19,89 €
bez VAT · 21,66 € z VAT
−5 % NASZA PORADA DOSTĘPNY

PUC10x6.5-20BL, TECHNOLINE, coiled polyurethane pneumatic tube, 10×6.5mm, working length 20m, blue

Nr kat.: PUC10x6,5-20BL

PUC10x6.5-20BL, TECHNOLINE, coiled PU tube 10×6.5mm, blue, working length 20m and free ends. Working pressure 10bar, temperature −20 to +60°C.

Dostępny 5 i więcej szt.
25,63 € 26,98 €
bez VAT · 31,01 € z VAT
−50 % NASZA PORADA

TPA4X2B, TECHNOLINE, polyamide pneumatic tube, 4×2mm, black

Nr kat.: TPA4X2B

TPA4X2B, TECHNOLINE, polyamide tube 4×2mm, black. For Ø4mm push-in fittings; material PA.

Na zapytanie
0,09 € 0,18 €
bez VAT · 0,11 € z VAT
−20 % NASZA PORADA

TPU6X4BL, TECHNOLINE, polyurethane pneumatic tube, 6×4mm, blue

Nr kat.: TPU6X4BL

TPU6X4BL, TECHNOLINE, polyurethane pneumatic tube 6×4mm, blue. Working pressure 10bar, burst pressure 30bar, −20 to +60°C.

Na zapytanie
0,54 € 0,68 €
bez VAT · 0,65 € z VAT

TU0425B-20, polyurethane tube, black, SMC

Nr kat.: TU0425B-20

TU0425B-20 – SMC polyurethane tube, diameter 4.0/2.5mm, length 20m, colour black. Intended for pneumatic compressed air distribution. Max. operating pressure 0.8 MPa, temperature –20 to +60 °C.

Na zapytanie
8,86 €
bez VAT · 10,72 € z VAT

TU0425BU-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, blue

Nr kat.: TU0425BU-20

TU0425BU-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, blue. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must…

Na zapytanie
8,86 €
bez VAT · 10,72 € z VAT

TU0425G-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, green

Nr kat.: TU0425G-20

TU0425G-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, green. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must…

Na zapytanie
8,86 €
bez VAT · 10,72 € z VAT

TU0425W-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, white

Nr kat.: TU0425W-20

TU0425W-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, white. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must…

Na zapytanie
8,86 €
bez VAT · 10,72 € z VAT

TU0425Y-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, yellow

Nr kat.: TU0425Y-20

TU0425Y-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, yellow. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must…

Na zapytanie
8,86 €
bez VAT · 10,72 € z VAT

TU0425R-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, red

Nr kat.: TU0425R-20

TU0425R-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, red. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect…

Na zapytanie
8,86 €
bez VAT · 10,72 € z VAT

TU0425C-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, clear

Nr kat.: TU0425C-20

TU0425C-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, clear. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must…

Na zapytanie
8,86 €
bez VAT · 10,72 € z VAT

Ceny zawierają opłatę recyklingową.

Pneumatic tubes

Choose the tube as part of the whole route between the air source and the point of consumption. The medium, temperature, pressure, length, space and connection method are decisive. When replacing an old line, first copy the designation and measure both diameters. Neither colour nor similar appearance is a sufficient basis for an order.

The listing includes Pneuflex and SMC tubes, straight and coiled versions and cutting tools. The material branches include PU, PTFE and FEP; polyamide is also represented. Selection therefore starts with the operating specification, not the assumption that all items have the same properties.

Material according to the actual task

For a flexible line, assess Polyurethane PU tubes. Pneuflex for ester-based PU emphasises flexibility and abrasion resistance; for polyamide describes options for higher pressures and temperatures than PU. This is a characteristic of these families, not common limit values for all offered sizes.

If the specification includes a chemical medium or elevated temperature, compare Teflon tubes a Fluoropolymer FEP tubes. In the enquiry, state the specific substance, concentration, temperature and contact time. State separately whether the substance flows inside or is used for external cleaning. Only with these data can documentation of the suitability of the whole assembly be requested.

Two diameters, two selection questions

Compare the outer diameter with the requirements of the fitting, the inner diameter with the need for media flow. SMC TU/TIUB table states both dimensions separately and distinguishes metric and inch versions. In addition to the dimension, verify the prescribed material and tolerance; similar numbers in the catalogue do not by themselves prove interchangeability.

For the design, draw the route and mark every fitting, sheet-metal pass-through and change of direction. For each point, decide whether it must remain accessible for service. The drawing allows two routing variants to be compared before purchase and reveals unnecessary loops. For a moving workplace, consider separately Coiled polyurethane PU tubes according to the working reach actually needed.

Model calculation of internal volume

Let us consider, purely for tutorial purposes, two four-metre tubes with an inner diameter of 4 and 6 mm. The volume of the cylindrical space V = π × d² × L / 4 is approximately 50.3 and 113.1 ml. The second variant has 2.25 times larger internal volume. The calculation uses chosen dimensions, not the parameters of a specific product.

The result shows how much space the route itself contains. It does not determine the flow rate, pressure loss or response time. To assess them, add the actual working pressure, consumption and all local resistances. When changing the length, also recalculate the volume; do not compare a new line only by diameter.

Mounting and troubleshooting

According to the SMC mounting instructions disconnect the supply and release the residual pressure. Check for an undamaged square cut, insertion into the specified fitting and routing without tension or twisting. For preparing the ends, use Cutting pliers, knives.

In case of problems, record whether they occur permanently, during consumption, after warming up, or only in a certain position of the machine. Always check one branch at a time and record the changes made. This separates observation from assumption and avoids repeated tube replacement without finding the cause.

FAQ

Is it enough to keep the colour when replacing?

Use colour for your own clear marking. Determine the replacement by the full code, dimensions and documented conditions of use.

Can air consumption be determined from length and diameter?

The dimensions alone determine the geometric volume. Consumption also requires a description of the working cycle and pressure states; the stated model does not calculate it.

Pliki cookies na tej stronie

Techniczne pliki cookies są potrzebne do działania koszyka i zamówienia — są używane zawsze. Analityczne pliki cookies pokazują nam, których stron ludzie szukają i gdzie się gubią, i pomagają nam ulepszać sklep. Użyjemy ich tylko wtedy, gdy na to pozwolisz. Więcej w zasadach przetwarzania danych.