Technical support
Buying a part is half the job. We'll help you with the rest.
Wiring, configuration, parameter setting and troubleshooting. On the other end of the phone you'll find not just a salesperson, but technicians who install and program the same components on our own machines every day.
What we can help you with
We provide support for products purchased from us.
Before you call: a quick check
The most common problems that can be solved in a few minutes. And if not, we'll have more information straight away.
- Is the LED on the sensor lit? If so, the sensor detects the object – the problem is more likely in the wiring.
- Does PNP / NPN match the PLC input? Mixing them up is the most common mistake.
- Check the sensing distance – it is usually shorter for metals other than steel.
- Write down the exact error code from the display – it's the fastest way to find the cause.
- Do the motor parameters match the rating plate (current, voltage, speed)?
- Overload during start-up is often solved by a longer ramp.
- Is your computer in the same IP address range as the PLC?
- Are the link indicators on the port lit?
- For a serial line, check the baud rate, parity and station address.
Manuals and datasheets are on the product page
Many products have a Downloads tab in their details with technical documentation, manuals and datasheets. Can't find what you need? Write to us and we'll be happy to send the documentation.
To make it quick
Please include with every question:
- ✓the product type and ideally the order or invoice number,
- ✓what exactly is happening and when the problem occurs,
- ✓the error code from the display, if there is one,
- ✓a photo of the wiring or rating plate – it often says more than a long description.