TPC04-M5, TECHNOLINE, straight push-in fitting, tube Ø4mm, male thread M5
- Our price excl. VAT
- 0,66 €
- incl. VAT 21 %
- 0,80 €
Minimum order 10 pcs — can only be ordered in multiples.
Description
TPC04-M5, TECHNOLINE, straight push-in fitting, tube Ø4mm, male thread M5
TPC04-M5 represents straight push-in fitting brand TECHNOLINE. The push-in part is intended for a tube with an outer diameter of Ø4mm. The connection part has male thread M5. The position of the tube outlets and the type of counterpart are as decisive for correct fitting as the nominal diameter.
What is this variant used for?
It is used for straight routing of a tube from the threaded port of a valve, cylinder or manifold. The advantage of this configuration is that the tube continues in the axis of the connection thread and the routing remains clear. The composite body with a metal threaded part is practical where easy tube handling and a clearly routed line are important. The Ø4mm diameter is intended for narrower branches where the required flow rate and line length are assessed. The designation M5 is a metric thread; it must not be confused with an inch thread of the same approximate diameter.
Exact technical parameters
| Order code | TPC04-M5 |
|---|---|
| Brand | TECHNOLINE |
| Version | straight push-in fitting |
| Outer diameter of the connected tube | Ø4mm |
| Connection thread | M5 |
| Thread direction | male |
| Number of push-in tube ports | 1 |
| Routing shape | straight |
| Body | PBT composite / nickel-plated brass on the threaded part |
| Push-in joint seal | NBR |
| Tube clip | stainless steel |
| Series working pressure | 0–10bar |
| Series proof pressure | 30bar |
| Series vacuum | to −100kPa |
| Series working temperature | 0 to +60°C |
| Standard tube materials stated for the series | PU, PA, PE, PVC |
| Typical medium | compressed air; other media only according to the compatibility of the assembly |
Why choose TECHNOLINE fittings?
In the TECHNOLINE range, you can select the assembly directly: tube size, suitable connection fitting and alternative geometry for mounting. For push-in connection it is enough to insert a suitably prepared tube into the port and it is held by the retaining clip; the release ring is used for dismantling after depressurisation. Depending on the specific assembly, this eliminates the need for a separate union nut. The straight version routes the tube in the thread axis and makes it easier to arrange the distribution clearly. The advantage of clear SKU marking is repeated purchase of the correct variant without mixing up thread, material and shape.
Mounting and safe use
Cut the tube square, straight and without burrs; insert its end up to the stop of the push-in opening. After pulling lightly, verify the retention of the tube and then check tightness at the prescribed operating pressure. Dismantle only after depressurising, by pressing the release ring.
For thread M5 choose the corresponding metric counterpart and tighten according to its technical requirements. A higher tightening torque does not necessarily mean better tightness.
The operating limits of the whole assembly are always determined by the weakest part: fitting, tube, seal and connected port. Values stated for the fitting cannot be transferred to the tube itself.
Suitable tubes and related fittings
On the push-in side, the decisive factor is tube outer diameter Ø4mm. In the TECHNOLINE range you will find dimensionally matching PU tubes, for example TPU4X2.5B (black PU tube 4×2.5mm), TPU4X2.5CL (clear PU tube 4×2.5mm). Browse polyurethane tubes.
When assembling, also verify the pressure and temperature resistance of the tube, its wall thickness, outer diameter tolerance and medium. Dimensional match alone does not confirm suitability for all operating conditions.
Other relevant versions from our range (not automatically interchangeable parts):
- TPCF04-M5 – same tube Ø and thread size, but different thread direction – a different counterpart is needed.
- TPL04-M5 – same tube Ø and thread, different geometric shape of the fitting.
- TPC04-M6 – same type and diameter, different thread – not directly interchangeable.
To browse the whole group, use straight fittings; when changing the thread or shape, compare the new code with the original.
Frequently asked customer questions
TPC04-M5 takes a tube with an outer diameter of Ø4mm; the inner diameter of the tube may vary depending on the type of distribution.
For TPC04-M5, thread M5 is stated; its size, sealing surface and type of counterpart must match.
No. Work with PU, PA, PE and PVC tubes is documented for the series. For PTFE, stiffness, outer diameter tolerance, seal and operating temperature must be verified separately; the high temperature resistance of PTFE does not transfer to the fitting.
The series parameters apply only within the range of a suitable connection and a correctly chosen tube. When designing a pneumatic distribution, the weakest link of the assembly is always assessed.
Technical parameters
| Objednací kód | TPC04-M5 |
|---|---|
| Výrobce | TECHNOLINE |
| Hose diameter | 4mm |
| Thread | M5 |
| Material | Metal/plastic |
| Thread type | External |
Ask about this product
Related products
TPC06-M5, TECHNOLINE, straight push-in fitting, tube Ø6mm, male thread M5
TPC06-M5
0,71 €
excl. VAT · 0,86 € incl. VAT
TPC04-G01, TECHNOLINE, straight push-in fitting, tube Ø4mm, male thread G1/8
TPC04-G01
0,75 €
excl. VAT · 0,91 € incl. VAT
TPC04-M6, TECHNOLINE, straight push-in fitting, tube Ø4mm, male thread M6
TPC04-M6
0,80 €
excl. VAT · 0,97 € incl. VAT
TPC06-G01, TECHNOLINE, straight push-in fitting, tube Ø6mm, male thread G1/8
TPC06-G01
0,85 €
excl. VAT · 1,03 € incl. VAT
TPC04-G02, TECHNOLINE, straight push-in fitting, tube Ø4mm, male thread G1/4
TPC04-G02
0,90 €
excl. VAT · 1,08 € incl. VAT