TPU12x8BL, TECHNOLINE, polyurethane pneumatic tube, 12×8mm, blue
- Regular price excl. VAT
- 1,13 €
- incl. VAT
- 1,36 €
- Our price excl. VAT
- 0,90 €
- incl. VAT 21 %
- 1,09 €
- You save
- 0,23 € excl. VAT
Description
TPU12x8BL, TECHNOLINE, polyurethane pneumatic tube, 12×8mm, blue
TPU12x8BL is a polyurethane tube in the TECHNOLINE range. With a diameter of 12×8mm and a wall of 2mm, the inner cross-section is 50.27mm². The fitting is selected according to outer diameter Ø12mm, not by the inner bore 8mm.
Technical parameters of the specific variant
| Parameter | Value |
|---|---|
| Order code | TPU12x8BL |
| Manufacturer | TECHNOLINE |
| Type | straight PU tubes |
| Material | polyurethane (PU) |
| Outer diameter (OD) | 12mm |
| Inner diameter (ID) | 8mm |
| Wall thickness (calculation) | 2mm |
| Theoretical flow area (calculation) | 50.27mm² |
| Colour | blue |
Pressures, operating limits and bends
| Parameter | Value |
|---|---|
| Nominal working pressure | 10bar (1.0MPa) |
| Burst pressure | 30bar (3.0MPa) – failure limit, not working pressure |
| Declared temperature range | −20 to +60°C |
| Dependence of working pressure on temperature | At higher temperatures, the permissible pressure may decrease. The value 10bar cannot automatically be applied to +60°C. |
| Minimum radius of the PU tube itself | A separate material value is not documented for the specific compound; use the mounting recommendation for routing at the fitting below |
| Mounting radius of the line at a push-in fitting | R ≥ 150mm for OD Ø12mm – recommendation for the connection section, not an independently documented minimum bend of the tube material |
What does a small bending radius mean?
Bending the tube into too sharp an arc can make its inner profile oval, increase pressure loss and gradually fatigue the wall. The flexibility of PU alone does not replace the catalogue minimum radius for the exact variant.
Practical guide to material and pneumatic distribution
Why polyurethane?
A polyurethane tube combines compliance for distribution with moving sections, flexible bending and generally good abrasion resistance. PU allows the line to be routed around machine components where a stiffer tube would complicate routing. However, its capabilities vary according to the material subtype, temperature and specific composition.
For this version TPU12x8BL: A larger inner bore can help reduce pressure losses in long or flow-intensive branches, but needs more space for bending and correspondingly larger fittings.
What affects the flow rate and cylinder response?
The inner diameter determines the geometric cross-section; the actual flow rate further depends on the line length, the flow coefficient of fittings and valves, the pressure differential and the compressibility of air. A doubled cross-section alone does not mean exactly double the actual flow rate.
Geometric calculation for TPU12x8BL: wall thickness = (12 − 8)/2 = 2mm. Theoretical cross-section A = π·8²/4 = 50.27mm². OD/ID ratio = 1.5. The calculation says nothing about pressure resistance.
Effect of temperature on working pressure
With higher temperature, the mechanical properties of PU and the permissible working pressure may change. When designing the line, respect the operating temperature and the lowest pressure limit of the whole assembly. The burst pressure cannot be used as the working pressure.
Line volume for this bore
One metre of tube with an inner diameter 8mm has a geometric volume of approximately 50.27ml. When a fast response of the pneumatic actuator is required, monitor the line length and the volume that needs to be pressurised or exhausted when the state changes. This is not a flow rate value or the volume of compressed air at operating pressure.
Difference from the next size variant
The same group also includes TPU10X8BL (Ø10×8mm). The geometric bore of this variant represents 1 times cross-section of the compared product. This is a purely dimensional comparison; the maximum pressure or the exact ratio of actual flow rates cannot be determined from the difference in cross-sections.
Colour blue makes it possible to visually distinguish this pneumatic branch from other routes in the equipment. However, the colour variant alone does not prove a different pressure rating or chemical resistance.
Suitable fittings from the TECHNOLINE e-shop
For size OD 12mm, you can choose from the following push-in fittings in the TECHNOLINE range. The matching outer diameter, tube material and working limit of the whole assembly are decisive.
| Version | Fitting code | Link to e-shop |
|---|---|---|
| Straight push-in fitting | TPU12 | Show offer |
| Elbow fitting 90° | TPV12 | Show offer |
| T-connector | TPE12 | Show offer |
| Y-connector | TPY12 | Show offer |
The cut must be square and clean. Insert the tube to the stop, mechanically verify retention and carry out a leak check on first pressurisation.
Need a transition to a different diameter? Category Reducing fittings contains various dimensional combinations; select according to the actual OD values of both tubes.
Specific questions about the product
By outer diameter Ø12mm. The Ø8mm bore is used to assess the geometric cross-section, not the size of the push-in opening.
For routing the tube at a Ø12mm push-in fitting, the recommended radius is R ≥ 150mm. This dimension is not the minimum radius of the tube itself.
No. The value at 20°C is not automatically permissible at a higher temperature. The design must respect the temperature limitations of the exact material and the weakest element of the system.
Technical parameters
| Objednací kód | TPU12x8BL |
|---|---|
| Výrobce | TECHNOLINE |
| Outer diameter | 12mm |
| Inner diameter | 8mm |
| Colour | Blue |
Ask about this product
Related products
TPU4X2.5B, TECHNOLINE, polyurethane pneumatic tube, 4×2.5mm, black
TPU4X2,5B
0,25 €
excl. VAT · 0,31 € incl. VAT
TPU4X2.5CL, TECHNOLINE, polyurethane pneumatic tube, 4×2.5mm, clear
TPU4X2,5CL
0,25 €
excl. VAT · 0,31 € incl. VAT
TPU4x2.5BL, TECHNOLINE, polyurethane pneumatic tube, 4×2.5mm, blue
TPU4x2,5BL
0,32 €
excl. VAT · 0,38 € incl. VAT
TPU6x4CL, TECHNOLINE, polyurethane pneumatic tube, 6×4mm, clear
TPU6x4CL
0,47 €
excl. VAT · 0,57 € incl. VAT
TPU6X4B, TECHNOLINE, polyurethane pneumatic tube, 6×4mm, black
TPU6X4B
0,47 €
excl. VAT · 0,57 € incl. VAT