B100DK, EMAS, non-illuminated push button, red
- Our price excl. VAT
- 4,10 €
- incl. VAT 21 %
- 4,96 €
Description
B100DK, EMAS, non-illuminated push button, red
B100DK is a non-illuminated control push button made by EMAS. The description is prepared for unambiguous identification via the order code and for practical selection of the right variant.
With industrial control and signalling elements, similar-looking products may have different contacts, voltage, colour, switching program, protection rating or connector. Therefore, verified technical data are separated below from general information about use.
Function and principle
A control push button is designed for manual input of commands to a machine or control system. When selecting, check the mounting diameter, contact type, return or latching, colour and any illumination.
Typical applications
The product is used in industrial machines, switchboards, production lines and local control or signalling stations according to its specific function. Before use, verify the working environment, mechanical stress, required switching frequency and the link to the control system.
Technical specifications
| Order code | B100DK |
|---|---|
| Manufacturer | EMAS |
| Product type | non-illuminated control push button |
| Product series | EMAS control push buttons |
| EMAS catalogue | Product Overview Edition 57, page 25 |
| Catalogue conformity | exact code / row |
| Mounting diameter | 22 mm |
| Series protection | IP50 |
| Contacts | 1 NO |
| Colour | red |
| Degree of protection | IP50 |
| Supply | 500 V DC |
Mounting and wiring
Before mounting, compare the hole, thread, dimensions or mounting base. Make the electrical connection only after checking the supply voltage, contacts or inputs/outputs. After mounting, perform a function test in all operating states.
How to choose the right variant
Compare the mounting diameter, NO/NC contacts, momentary or latching version, colour, illumination and connection.
Compatibility and accessories
Select compatible cables, contact blocks, light modules, enclosures or mounting parts according to the same product series and the specific mechanical version. For modular systems, verify that the individual parts belong to the same series.
Provoz a servis
During regular maintenance, check the mechanical fastening, terminals or connectors and the correct function of signalling or switching. When replacing, record the order code, voltage, contact diagram and other parameters of the specific variant.
Data source and quality
The technical data are compiled from the TECHNOLINE source export and the EMAS Product Overview Edition 57 (30.06.2026) catalogue, page 25. For variants that are not listed literally in the overview, the catalogue rules of the given series and data from the specific product are used.
If a parameter is not given in the table, it was not unambiguously confirmed in the available source for the specific variant and was not inferred in the description.
FAQ
What kind of product is B100DK?
This is a non-illuminated control push button made by EMAS. The exact version of the specific variant is given in the technical table.
How to verify the correct variant of B100DK?
Compare the complete order number, product series, electrical parameters and mechanical version.
What should be checked before ordering?
Compare the mounting diameter, NO/NC contacts, momentary or latching version, colour, illumination and connection.
Why is a similar appearance not enough?
The same product series may contain variants with a different voltage, contacts, colour, connector, protection rating or switching program.
How to install the product?
Mount according to the mechanical version and the manufacturer's documentation. Before connecting, verify the supply, contacts, connector and safe disconnection of the equipment.
How to connect the product?
The wiring depends on the specific variant. Always check the contact or input/output diagram and the rated voltage before connecting.
Can another variant of the same series be used?
Only if the electrical function, mounting and required parameters match. Do not assess replacement based only on a photo or the basic name.
What is important for servicing?
Note the exact order code and key parameters in the service documentation; this will make future replacement easier.
What sources is the description based on?
The technical data are compiled from the TECHNOLINE source export and the EMAS Product Overview Edition 57 (30.06.2026) catalogue, page 25. For variants that are not listed literally in the overview, the catalogue rules of the given series and data from the specific product are used.
What if a parameter is missing?
The parameter was not unambiguously documented in the available documentation. Before designing the application, verify it in the detailed data sheet of the specific variant.
Technical parameters
| Objednací kód | B100DK |
|---|---|
| Výrobce | EMAS |
| Colour | Red |
| Actuator shape | Round |
| Actuator height | Yes |
| Contact type | 1xNO |
| Mounting hole diameter | 22mm |
| Degree of protection | IP50 |
| Contact block mounting | External |
Ask about this product
Related products
B-BUTON ORTA, EMAS, accessories of controls
B-BUTON ORTA
0,45 €
excl. VAT · 0,54 € incl. VAT
B-ROZET08, EMAS, label holder
B-ROZET08
0,54 €
excl. VAT · 0,65 € incl. VAT
B-ROZET18, EMAS, label holder
B-ROZET18
0,59 €
excl. VAT · 0,71 € incl. VAT
GRA-ORIG _ S, TECHNOLINE, engraved label
GRA-ORIG_S
1,31 €
excl. VAT · 1,59 € incl. VAT
B1, EMAS, Contact Block, B / C / D Series
B1
1,62 €
excl. VAT · 1,96 € incl. VAT
B2, EMAS, expansion contact
B2
1,62 €
excl. VAT · 1,96 € incl. VAT