KFG2H0806-01S, SMC, stainless steel straight fitting with plug-in coupling, tube Ø8×6mm, thread R1/8
- Our price excl. VAT
- 17,02 €
- incl. VAT 21 %
- 20,59 €
Description
KFG2H0806-01S, SMC, stainless steel straight fitting with plug-in coupling, tube Ø8×6mm, thread R1/8
KFG2H0806-01S is an original stainless steel straight fitting with plug-in coupling of the brand SMC. For tube Ø8×6mm (outer × inner diameter). The specific suffix and dimension code determine the thread, shape, seal or packaging; it is not safe to interchange related variants based on a photo alone.
What is this variant used for?
The series uses stainless steel 316 and an insert seal without a rubber O-ring in the push-in joint. It is suitable for expert assessment with higher requirements for temperature or chemical resistance, always with regard to the medium and tube.
Exact technical parameters
| Order code | KFG2H0806-01S |
|---|---|
| Brand | SMC |
| Product type | stainless steel straight fitting with plug-in coupling |
| Tube outer diameter | Ø8mm |
| Inner tube diameter – important for insert fittings | Ø6mm |
| Connection thread (dimensional designation) | R1/8 |
| Series operating pressure | −1 to +10bar |
| Series working temperature | −65 to +260°C |
| Material | stainless steel 316 |
How to choose the right fitting?
Components of different brands can be selected in one place according to diameter, thread and specific series. The benefit of correct selection is not a promise of a universal replacement, but easier matching of the actual distribution dimensions.
Mounting and safe use
Before insertion, cut the tube square, clean it and insert it according to the mounting procedure of the selected series. Depressurise the distribution before releasing; determine suitability for the medium, temperature and tube type according to the original instructions.
The operating limits of the whole assembly are always determined by the weakest part: fitting, tube, seal and connected port. Values stated for the fitting cannot be transferred to the tube itself.
Suitable tubes and related fittings
Complete the tube selection according to the exact dimensional specification. Pneumatic tubes in the e-shop.
Other size and shape variants can be found in the category Straight fittings.
Frequently asked customer questions
KFG2H0806-01S takes a tube of size Ø8×6mm (outer × inner diameter). Insert fixing requires both dimensions to match.
Not automatically. For KFG2H0806-01S, compare the tube diameter, thread, mounting method, outlet shape and operating limits of both products.
The documented limits of the specific catalogue series, medium, tube and seal are decisive. Increased temperature resistance of the stainless steel or brass part alone does not guarantee the resistance of the whole assembly.
The stated parameters refer to a specific SMC catalogue family. When replacing, check the full order designation.
Technical parameters
| Objednací kód | KFG2H0806-01S |
|---|---|
| Výrobce | SMC |
Ask about this product
Related products
TPC04-M5, TECHNOLINE, straight push-in fitting, tube Ø4mm, male thread M5
TPC04-M5
0,66 €
excl. VAT · 0,80 € incl. VAT
TPC06-M5, TECHNOLINE, straight push-in fitting, tube Ø6mm, male thread M5
TPC06-M5
0,71 €
excl. VAT · 0,86 € incl. VAT
TPC04-G01, TECHNOLINE, straight push-in fitting, tube Ø4mm, male thread G1/8
TPC04-G01
0,75 €
excl. VAT · 0,91 € incl. VAT
TPC04-M6, TECHNOLINE, straight push-in fitting, tube Ø4mm, male thread M6
TPC04-M6
0,80 €
excl. VAT · 0,97 € incl. VAT
TPC06-G01, TECHNOLINE, straight push-in fitting, tube Ø6mm, male thread G1/8
TPC06-G01
0,85 €
excl. VAT · 1,03 € incl. VAT