Phone +420 774 723 123 Cart · 0 · empty
OUR TIP IN STOCK
TPC12-G04, TECHNOLINE, straight push-in fitting, tube Ø12mm, male thread G1/2

TPC12-G04, TECHNOLINE, straight push-in fitting, tube Ø12mm, male thread G1/2

Cat. no.: TPC12-G04
Manufacturer: TECHNOLINE
In stock 180 pcs
Our price excl. VAT
2,36 €
incl. VAT 21 %
2,85 €

Minimum order 5 pcs — can only be ordered in multiples.

Weight 0.04 kg
HS Code (Taric) 74122000
Country of origin CN

Description

TPC12-G04, TECHNOLINE, straight push-in fitting, tube Ø12mm, male thread G1/2

Ø12mmG1/2straightcomposite0–10bar0 to +60°C

TPC12-G04 represents straight push-in fitting brand TECHNOLINE. The push-in part is intended for a tube with an outer diameter of Ø12mm. The connection part has male thread G1/2. The position of the tube outlets and the type of counterpart are as decisive for correct fitting as the nominal diameter.

What is this variant used for?

It is used for straight routing of a tube from the threaded port of a valve, cylinder or manifold. The advantage of this configuration is that the tube continues in the axis of the connection thread and the routing remains clear. The composite body with a metal threaded part is practical where easy tube handling and a clearly routed line are important. For Ø12mm, allow for greater installation space requirements and a sufficient tube bending radius. The connection size G1/2 must exactly match the counterpart and sealing surface; it cannot be selected only by the tube diameter.

Exact technical parameters

Order code TPC12-G04
Brand TECHNOLINE
Version straight push-in fitting
Outer diameter of the connected tube Ø12mm
Connection thread G1/2
Thread direction male
Number of push-in tube ports 1
Routing shape straight
Body PBT composite / nickel-plated brass on the threaded part
Push-in joint seal NBR
Tube clip stainless steel
Series working pressure 0–10bar
Series proof pressure 30bar
Series vacuum to −100kPa
Series working temperature 0 to +60°C
Standard tube materials stated for the series PU, PA, PE, PVC
Typical medium compressed air; other media only according to the compatibility of the assembly

Why choose TECHNOLINE fittings?

In the TECHNOLINE range, you can select the assembly directly: tube size, suitable connection fitting and alternative geometry for mounting. For push-in connection it is enough to insert a suitably prepared tube into the port and it is held by the retaining clip; the release ring is used for dismantling after depressurisation. Depending on the specific assembly, this eliminates the need for a separate union nut. The straight version routes the tube in the thread axis and makes it easier to arrange the distribution clearly. The advantage of clear SKU marking is repeated purchase of the correct variant without mixing up thread, material and shape.

Mounting and safe use

Cut the tube square, straight and without burrs; insert its end up to the stop of the push-in opening. After pulling lightly, verify the retention of the tube and then check tightness at the prescribed operating pressure. Dismantle only after depressurising, by pressing the release ring.

Thread G1/2 must be paired with the corresponding counterpart. The design of the sealing seat and the use of sealant are determined by the thread geometry; do not assume that G and R threads are interchangeable without adjusting the seal.

The operating limits of the whole assembly are always determined by the weakest part: fitting, tube, seal and connected port. Values stated for the fitting cannot be transferred to the tube itself.

Suitable tubes and related fittings

On the push-in side, the decisive factor is tube outer diameter Ø12mm. In the TECHNOLINE range you will find dimensionally matching PU tubes, for example TPU12x8B (black PU tube 12×8mm), TPU12x8BL (blue PU tube 12×8mm). Browse polyurethane tubes.

When assembling, also verify the pressure and temperature resistance of the tube, its wall thickness, outer diameter tolerance and medium. Dimensional match alone does not confirm suitability for all operating conditions.

Other relevant versions from our range (not automatically interchangeable parts):

  • TPCF12-G04 – same tube Ø and thread size, but different thread direction – a different counterpart is needed.
  • TPL12-G04 – same tube Ø and thread, different geometric shape of the fitting.
  • TPC12-G01 – same type and diameter, different thread – not directly interchangeable.

To browse the whole group, use straight fittings; when changing the thread or shape, compare the new code with the original.

Frequently asked customer questions

What tube size belongs in TPC12-G04?

TPC12-G04 takes a tube with an outer diameter of Ø12mm; the inner diameter of the tube may vary depending on the type of distribution.

What needs to be checked on thread TPC12-G04?

For TPC12-G04, thread G1/2 is stated; its size, sealing surface and type of counterpart must match.

Is TPC12-G04 automatically suitable for PTFE tubes too?

No. Work with PU, PA, PE and PVC tubes is documented for the series. For PTFE, stiffness, outer diameter tolerance, seal and operating temperature must be verified separately; the high temperature resistance of PTFE does not transfer to the fitting.

The series parameters apply only within the range of a suitable connection and a correctly chosen tube. When designing a pneumatic distribution, the weakest link of the assembly is always assessed.

Technical parameters

Objednací kódTPC12-G04
VýrobceTECHNOLINE
Hose diameter12mm
ThreadG04 - 1/2"
MaterialMetal/plastic
Thread typeExternal

Ask about this product

Ask us about technical parameters, compatibility with your equipment, availability or a price for larger quantities. It helps if you tell us what application you need the product for — if it does not fit, we will recommend a more suitable type.

Kód k opsání. Pokud ho nepřečtete, klikněte na Načíst nový kód.
The question relates to product TPC12-G04

By sending you agree to the processing of the data provided for the purpose of handling your question. We do not pass the data on to third parties.

Related products

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.