THVFF08-08, TECHNOLINE, manual pneumatic in-line shut-off valve, 2ר8mm
- Our price excl. VAT
- 5,12 €
- incl. VAT 21 %
- 6,19 €
Description
THVFF08-08, TECHNOLINE, manual pneumatic in-line shut-off valve, 2ר8mm
THVFF08-08 allows the flow of compressed air in a Ø8mm tube route to be manually opened or interrupted. It connects two push-in ends and switching is done with a lever, so the operator does not have to disconnect the tube.
Where and why to use this particular version
Manual shut-off of a branch makes it easier to organise pneumatic circuits, for example when changing a fixture. However, closing the supply may not automatically remove the residual pressure in the part of the line downstream of the valve.
Why choose TECHNOLINE pneumatic elements
When assembling a pneumatic circuit, a regulator, a corresponding PU tube and the connecting push-in elements can be selected together according to the outer diameter. The advantage is finding the exact interface in one catalogue; however, the choice of control direction and safe adjustment always depend on the specific circuit.
Practical decision criterion: Design the distribution on both sides with tubes of outer Ø8mm and assess whether a separate exhaust element is necessary.
Technical parameters of the specific variant
| Order code | THVFF08-08 |
|---|---|
| Brand | TECHNOLINE |
| Catalogue series | HVFF |
| Version | manual pneumatic in-line shut-off valve |
| Push-in ports | 2× Ø8mm |
| Control | manual, lever rotation by 90° |
| Function | opening / closing of air flow |
| Exact version | 2ר8mm |
Variant selection, mounting and operation
The individual variants of a 2-way shut-off and 3-way exhaust behave differently; the pressure release function cannot be derived from a similar appearance alone. Observe the flow direction arrow on the body.
Set the regulation at a verified actuator speed, respecting the safe end position. A change in flow may also be caused by increased clogging, leakage, incorrect throttling direction or a tube line that is too small.
Related goods and choice of compatible accessories
- TPU8X5.5B – dimensional recommendation PU tube outer Ø8mm; assess working limits before ordering.
- THVFF06-06 – item of the same series; compare function, diameter or thread – not an automatic replacement.
- THVFF06-06-WE – item of the same series; compare function, diameter or thread – not an automatic replacement.
- THVFF08-08-WE – item of the same series; compare function, diameter or thread – not an automatic replacement.
- THVFF10-10 – item of the same series; compare function, diameter or thread – not an automatic replacement.
Other variants: Throttle and control valves · Reducing fittings
Frequently asked questions about this variant
For variant THVFF08-08, the version "2ר8mm" is decisive. When mounting, observe the flow direction marks and the corresponding ports.
Only if all parameters match: control function, connection and flow direction. The same tube diameter for THVFF08-08 is not enough for a direct replacement.
Before replacing THVFF08-08, compare the full order code, connection, design function and the relevant operating conditions. Another series may look the same but have different parameters.
Technical parameters
| Objednací kód | THVFF08-08 |
|---|---|
| Výrobce | TECHNOLINE |
| Hose diameter | 8mm |
| Thread size | none |
Ask about this product
Related products
TJSC06-M5, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø6mm, thread M5
TJSC06-M5
2,46 €
excl. VAT · 2,98 € incl. VAT
TJSC04-M5, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread M5
TJSC04-M5
2,46 €
excl. VAT · 2,98 € incl. VAT
TJSC06-M6, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø6mm, thread M6
TJSC06-M6
2,46 €
excl. VAT · 2,98 € incl. VAT
TJSC04-M6, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread M6
TJSC04-M6
2,51 €
excl. VAT · 3,04 € incl. VAT
TJSC04-G01, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread G1/8
TJSC04-G01
2,66 €
excl. VAT · 3,22 € incl. VAT