KQ2C10-00A, SMC, plug for open tube end, Ø10mm
- Our price excl. VAT
- 2,33 €
- incl. VAT 21 %
- 2,82 €
Description
KQ2C10-00A, SMC, plug for open tube end, Ø10mm
KQ2C10-00A is a tube end plug intended for the corresponding Ø10mm tube end. Unlike the plug-in plug KQ2P, it does not address a free push-in port of a fitting, but the closure of a separate line.
Where and why to use this particular version
Useful when configuring distribution where there is a free tube end and the whole tube branch should not be dismantled.
Practical decision criterion: This size requires push-in elements for an outer Ø10mm, not for another diameter.
Technical parameters of the specific variant
| Order code | KQ2C10-00A |
|---|---|
| Brand | SMC |
| Catalogue series | SMC KQ2 |
| Version | plug for the open end of a tube |
| Tube outer diameter | Ø10mm |
| Location | for closing the open end of a compatible Ø10mm tube |
| Exact version | Ø10mm |
Variant selection, mounting and operation
Before a pressurised application, verify the actual design of the end fitting and the method of securing on the tube. Variants KQ2C and KQ2P are not interchangeable.
Always depressurise the circuit before closing a port. When later restoring the connection, check the seal and the undamaged thread or push-in seat.
Related goods and choice of compatible accessories
- TPU10X6.5B – dimensional recommendation PU tube outer Ø10mm; assess working limits before ordering.
- KQ2C04-00A – item of the same series; compare function, diameter or thread – not an automatic replacement.
- KQ2C06-00A – item of the same series; compare function, diameter or thread – not an automatic replacement.
- KQ2C08-00A – item of the same series; compare function, diameter or thread – not an automatic replacement.
- KQ2P-04 – item of the same series; compare function, diameter or thread – not an automatic replacement.
Other variants: Blanking plugs and plugs
Frequently asked questions about this variant
KQ2C10-00A is a plug for an open tube end; the version is "Ø10mm". Port plugs and tube end plugs are not the same.
For KQ2C10-00A, check the correct connection interface, seating and securing. For the threaded version, also the seal type and thread type.
Before replacing KQ2C10-00A, compare the full order code, connection, design function and the relevant operating conditions. Another series may look the same but have different parameters.
Technical parameters
| Objednací kód | KQ2C10-00A |
|---|---|
| Výrobce | SMC |
Ask about this product
Related products
TPP06, TECHNOLINE, plug-in plug for push-in port, Ø6mm stem for push-in port
TPP06
0,25 €
excl. VAT · 0,30 € incl. VAT
TPP04, TECHNOLINE, plug-in plug for push-in port, Ø4mm stem for push-in port
TPP04
0,25 €
excl. VAT · 0,30 € incl. VAT
TPP10, TECHNOLINE, plug-in plug for push-in port, Ø10mm stem for push-in port
TPP10
0,25 €
excl. VAT · 0,30 € incl. VAT
TPP08, TECHNOLINE, plug-in plug for push-in port, Ø8mm stem for push-in port
TPP08
0,25 €
excl. VAT · 0,30 € incl. VAT
TSPIM-G01, TECHNOLINE, threaded plug with internal hexagon, male thread G1/8, closing a hole, TSPIM version
TSPIM-G01
0,28 €
excl. VAT · 0,33 € incl. VAT