KQ2P-06, SMC, push-in port plug, Ø6mm
- Our price excl. VAT
- 0,94 €
- incl. VAT 21 %
- 1,14 €
Description
KQ2P-06, SMC, push-in port plug, Ø6mm
KQ2P-06 is inserted into an unused push-in collet with a nominal diameter of Ø6mm. It allows a free connection to be temporarily taken out of use without mounting a separate threaded fitting.
Where and why to use this particular version
A port plug is used where a push-in fitting is already installed and no tube is connected. It is not inserted into the tube and is not a replacement for a threaded port plug.
Practical decision criterion: This size requires push-in elements for an outer Ø6mm, not for another diameter.
Technical parameters of the specific variant
| Order code | KQ2P-06 |
|---|---|
| Brand | SMC |
| Catalogue series | SMC KQ2 |
| Version | push-in port plug |
| Plug-in diameter | Ø6mm |
| Location | into the push-in port of a fitting for Ø6mm tube |
| Exact version | Ø6mm |
Variant selection, mounting and operation
For sealing, it must correspond to the specific type of push-in port and its nominal size. Under pressure, check the securing of the plug-in part.
Always depressurise the circuit before closing a port. When later restoring the connection, check the seal and the undamaged thread or push-in seat.
Related goods and choice of compatible accessories
- TPU6X4B – dimensional recommendation PU tube outer Ø6mm; assess working limits before ordering.
- KQ2C04-00A – item of the same series; compare function, diameter or thread – not an automatic replacement.
- KQ2C06-00A – item of the same series; compare function, diameter or thread – not an automatic replacement.
- KQ2C08-00A – item of the same series; compare function, diameter or thread – not an automatic replacement.
- KQ2C10-00A – item of the same series; compare function, diameter or thread – not an automatic replacement.
Other variants: Blanking plugs and plugs
Frequently asked questions about this variant
KQ2P-06 is a push-in port plug; the version is "Ø6mm". Port plugs and tube end plugs are not the same.
For KQ2P-06, check the correct connection interface, seating and securing. For the threaded version, also the seal type and thread type.
Before replacing KQ2P-06, compare the full order code, connection, design function and the relevant operating conditions. Another series may look the same but have different parameters.
Technical parameters
| Objednací kód | KQ2P-06 |
|---|---|
| Výrobce | SMC |
Ask about this product
Related products
TPP06, TECHNOLINE, plug-in plug for push-in port, Ø6mm stem for push-in port
TPP06
0,25 €
excl. VAT · 0,30 € incl. VAT
TPP04, TECHNOLINE, plug-in plug for push-in port, Ø4mm stem for push-in port
TPP04
0,25 €
excl. VAT · 0,30 € incl. VAT
TPP10, TECHNOLINE, plug-in plug for push-in port, Ø10mm stem for push-in port
TPP10
0,25 €
excl. VAT · 0,30 € incl. VAT
TPP08, TECHNOLINE, plug-in plug for push-in port, Ø8mm stem for push-in port
TPP08
0,25 €
excl. VAT · 0,30 € incl. VAT
TSPIM-G01, TECHNOLINE, threaded plug with internal hexagon, male thread G1/8, closing a hole, TSPIM version
TSPIM-G01
0,28 €
excl. VAT · 0,33 € incl. VAT