BARP, EMAS, DIN rail adapter for controls M22 / 22 mm
- Our price excl. VAT
- 3,94 €
- incl. VAT 21 %
- 4,76 €
Description
BARP, EMAS, DIN rail adapter for controls M22 / 22 mm
BARP is the manufacturer's mounting adapter EMAS for system controls M22 / 22 mmIt allows them to be installed on a DIN rail in a switchboard or other assembly assembly.
This part is a mounting accessory, not a separate switching or signalling element. The contact block, headers, switch or indicator light is selected according to a specific application.
Adapter function
The task of BARP is to create a mechanical interface between the M22 control element and the DIN rail. This allows elements typically intended for a control panel to be used inside a distribution board or on a mounting rail, if the construction of the specific assembly allows it.
Typical Applications
The adapter is suitable for service distribution boards, auxiliary control points, test assemblies, production machines, and other applications where it is convenient to place a control or signalling element directly on the DIN rail. Its application is particularly found where a control panel installation is not suitable.
Technical Parameters
| Order Code | BARP |
|---|---|
| Manufacturer | EMAS |
| Product Type | DIN rail adapter / control holder |
| Addressees | controls M22 / 22 mm |
| Mounting | on DIN rail |
| Catalogue source | EMAS Product Overview Edition 57, page 15 |
Installation on DIN rail
Before installation, check that the DIN rail is firmly mounted and that there is enough space in the distribution board for the installed control element and its contact blocks. Install the adapter without mechanical mounting and then insert the compatible M22 element.
After assembly, check mechanical stability, access to terminals and secure wiring. Electrical wiring is controlled by a specific control element, not by the Barp adapter.
How to Select the Correct Variant
The decisive factor is mechanical compatibility with a range of M22 / 22 mm and the requirement for installation on a DIN rail. If you need a standard control panel installation on the door of the distribution board, BARP is not necessary; it is used where the control element must be fixed to the rail.
Compatibility
The EMAS catalogue presents the BARP as DIN Rail Adapter for M22 Control UnitsTherefore, before ordering, compare the mechanical design of the specific control with the M22 / 22 mm series. A similar diameter of the hole itself may not guarantee compatibility with another manufacturer.
Service and control
During maintenance check the strength of the DIN bar attachment, mechanical locking of the control and access to the terminals. The adapter does not transmit the electrical signal, so functional control focuses on the mechanical stability of the whole assembly.
Source of technical data
Data are taken from the source export of TECHNOLINE and from the catalogue EMAS Product Overview Edition 57, 30.06.2026, where the BARP is listed as DIN Rail Adapter for M22 Control Units.
The catalogue does not specify additional dimensions or adapter material in this overview, therefore these values have not been added to the description.
Frequently asked questions
What's a BARP?
BARP is an EMAS DIN rail adapter designed for mounting controls M22 / 22 mm.
What is BARP used for?
It is used to attach compatible controls or signals to the DIN rail inside the switchboard or assembly assembly.
Is BARP a complete control?
No. It is a mounting accessory. The control or signalling element itself is selected separately according to the required function.
What size of controls is it intended for?
The source data and EMAS catalogue indicate it for controls M22, i.e. a series with a mounting dimension of 22 mm.
Is BARP designed for DIN rail?
Yes. The EMAS catalogue presents the BARP as the DIN Rail Adapter for M22 Control Units.
How to verify compatibility?
Compare the mechanical design of the control used with the M22 / 22 mm series and verify that the DIN rail assembly is suitable for a specific assembly.
How do you install the BARP?
The adapter is mechanically fixed to the DIN rail and then fitted with a compatible control. The exact procedure depends on the head and contact blocks used.
Can it also be used for signalling elements?
Yes, with regard to the mechanically compatible M22 / 22 mm element and its construction allows installation with this adapter.
What to check before ordering?
The exact code BARP, assembly system 22 mm / M22, available space on DIN bar and compatibility with selected control.
What source are the parameters taken from?
From EMAS Product Overview Edition 57 and from the source export TECHNOLINE. Unspecified dimensions or materials were not intended.
Technical parameters
| Objednací kód | BARP |
|---|---|
| Výrobce | EMAS |
Ask about this product
Related products
B-PUL, EMAS, steel plate under buttons and switches
B-PUL
0,43 €
excl. VAT · 0,52 € incl. VAT
B-BUTON ORTA, EMAS, accessories of controls
B-BUTON ORTA
0,45 €
excl. VAT · 0,55 € incl. VAT
TIPASOM-3DP, TECHNOLINE, economic blind
TIPASOM-3DP
0,49 €
excl. VAT · 0,60 € incl. VAT
B-ROZET08, EMAS, label holder
B-ROZET08
0,54 €
excl. VAT · 0,65 € incl. VAT
B-ROZET18, EMAS, label holder
B-ROZET18
0,59 €
excl. VAT · 0,71 € incl. VAT