TL-70-3-RGYF, APT, three-colour LED signalling beacon 70 mm, color red + green + yellow, flashing, 24 V AC / DC, IP65
TL-70-3-RGYF APT - three-colour LED signalling beacon 70 mm; colours red + green + yellow; 24 V AC / DC; IP65.
Rate 24,43 CZK per 1 EUR. Prices are indicative, invoicing is in Czech crowns.
Complete APT TL-70 assemblies, configuration selection and functional tests.
TL-70-3-RGYF APT - three-colour LED signalling beacon 70 mm; colours red + green + yellow; 24 V AC / DC; IP65.
TL-70-3-RGYB APT - three-colour LED signalling beacon 70 mm; colors red + green + yellow; 24 V AC / DC; IP65; horn > 100 dB (at 10 cm distance). Precision technical specifications, use and selection…
TL-70-3-RGYFB APT - three-colour LED signalling beacon 70 mm; colors red + green + yellow; 24 V AC / DC; IP65; horn > 100 dB (at 10 cm distance). Precise technical specifications, use and selection…
TL-70-4-RGYBL APT - four-colour LED signalling beacon 70 mm; colors red + green + yellow + blue; 24 V AC / DC; IP65. Precision technical specifications, use and selection of variants.
TL-70-4-RGYBLF APT - four-colour LED signalling beacon 70 mm; colours red + green + yellow + blue; 24 V AC / DC; IP65. Precision technical specifications, use and selection of variants.
TL-70-4-RGYBLB APT - four-colour LED signalling beacon 70 mm; colors red + green + yellow + blue; 24 V AC / DC; IP65; horn > 100 dB (at 10 cm distance). Precise technical specifications, use and…
TL-70-4-RGYBLFB APT - four-colour LED signalling beacon 70 mm; colors red + green + yellow + blue; 24 V AC / DC; IP65; horn > 100 dB (at 10 cm distance).
TL-70-5-RGYBLW APT - five- colour LED signalling beacon 70 mm; colors red + green + yellow + blue + white; 24 V AC / DC; IP65. Precision technical specifications, use and selection of variants.
TL-70-5-RGYBLWF APT - five- colour LED signalling beacon 70 mm; colours red + green + yellow + blue + white; 24 V AC / DC; IP65. Precision technical specifications, use and selection of variants.
Prices include the recycling fee.
Select a finished assembly according to the information to be passed on to the service. The number of colors should correspond to the actually distinguished states, not the total number of diagnostic messages from the PLC. The cause can be displayed on the service panel; the lamp should allow quickly identifying whether the device is working, waiting for an input, or requiring attention.
The category includes monochrome to five-color constructions APT TL-70. In the catalog, there are both steady and blinking variants; for one to four light panels, there are also assemblies with a plug. Five-color items TL-70-5-RGYBLW and TL-70-5-RGYBLWF are listed without a plug.
For example, TL-70-2-RGB has two colors, red and green, steady light, horn and power 24 V AC / DC. Thus, "RGB" does not mean three colour channels for mixing shades.
When activating the relevant circuit, the corresponding lighting status should be displayed. Permanent light and blinking can convey different urgency, but their meaning must be described in the machine documentation. For acoustics, also consider confirmation: the maintenance staff can record the event while its cause is still ongoing. Muting is possible only with the appropriate connection and control.
The product family defines categories Beacon - 70mm APT diameter (IP65); serves for service or configuration change Individual modules and accessories.
The term 'assembled' does not confirm the delivery of a specific wall console, cable length, or finished connector for your machine. Before ordering, verify the contents of the delivery, mounting layout, cable routing, and space for disassembly. Cable parts of similar dimensions should not be considered interchangeable without a basis. Changing one panel may also require modifying the documentation and program.
Manufacturer Acoustics of the TL-70 series Indicates more than 100 dB at a distance of 10 cm horizontally from the sound source.
This statement is not a warranty of the same level for remote service. Perform the warranty in the real working environment. Also consider whether the sound can be reliably assigned to the correct machine and whether the signal lighting remains understandable upon confirmation.
Assume a setup with three independent light beams and one beam for sound. Four binary beams create 2 × 2 × 2 × 2 = 16 combinations. Testing each function individually will not verify all combinations. In the model switching protocol, specify the expected behavior for each combination, including all off and all on commands. The calculation describes the test model; it does not verify the specific interface of the sold assembly or the need to display all combinations.
Only if such a combination has a clear, predetermined meaning. Otherwise set priority and suppress misleading operational messages during failure.
First verify the limit of configuration, compatibility of parts, cabling and free outputs. Repeat the functional test after the change; the original piece may no longer correspond to the actual design.
We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.
Choose which cookies we may use. You can change your choice at any time.
They keep the cart contents, your login and selected language, and protect forms from abuse. An order cannot be completed without them, so they are used even without consent.
Google Analytics shows us traffic and behaviour on the website in aggregated form. This tells us which pages are not working for people. We do not identify anyone from this data.