Phone +420 774 723 123 Cart · 0 · empty

10-Pin Metal Connectors

10-pin EMAS EBM metal connectors for multi-pole connection of machines and control cabinets. The range consists of cable and fixed parts, contact inserts and housings; you will also find LAPP EPIC inserts here. Always verify compatibility for the specific catalogue numbers.

Filters
Found 44 products
OUR TIP

EBM10FM44, EMAS, industrial socket, 10, 16A

Cat. no.: EBM10FM44

EBM10FM44 – 10-pin EMAS EBM metal industrial connector, male version, 16 A, bottom entry. Connector with a contact insert for detachable connection of cables and equipment.

On request
12,40 €
excl. VAT · 15,01 € incl. VAT

EBM10PU31, EMAS, portable socket 10p 16A, top entry, 1 lever

Cat. no.: EBM10PU31

EMAS EBM10PU31: portable socket, 10p, top entry, 16A, with one lever. EBM industrial series.

On request
12,43 €
excl. VAT · 15,04 € incl. VAT
OUR TIP

EBM10GD14, EMAS, surface-mount empty housing for industrial connector, 10 poles, 16A, side entry, 4 latches, PG21, IP65

Cat. no.: EBM10GD14

EBM10GD14, EMAS – surface-mount empty housing for EBM industrial multi-pole connector, 10 poles, 16A, side entry, PG21, IP65. Metal powder-coated version, operating temperature -40 to +125°C. It is…

On request
12,66 €
excl. VAT · 15,32 € incl. VAT

EBM10FU37, EMAS, portable plug 10p 16A, top entry, 2 metal levers

Cat. no.: EBM10FU37

EMAS EBM10FU37: portable plug, 10p, top entry, 16A, with two metal levers. EBM industrial series.

On request
15,19 €
excl. VAT · 18,37 € incl. VAT

EBM10PU14, EMAS, portable socket 10p 16A, side entry, 4 levers

Cat. no.: EBM10PU14

EMAS EBM10PU14: portable socket, 10p, side entry, 16A, with four levers. EBM industrial series.

On request
15,19 €
excl. VAT · 18,38 € incl. VAT

EBM10PU37, EMAS, portable socket 10p 16A, top entry, 2 metal levers

Cat. no.: EBM10PU37

EMAS EBM10PU37: portable socket, 10p, top entry, 16A, with two metal levers. EBM industrial series.

On request
15,19 €
excl. VAT · 18,38 € incl. VAT
OUR TIP

EBM10FD24, EMAS, industrial socket, 10, 16A

Cat. no.: EBM10FD24

EBM10FD24 – 10-pin EMAS EBM metal industrial connector, male version, 16 A, double side entry. Connector with a contact insert for detachable connection of cables and equipment.

On request
19,67 €
excl. VAT · 23,80 € incl. VAT

Prices include the recycling fee.

10-pin EMAS EBM metal industrial connectors

10-pin EMAS EBM metal connectors for multi-pole connection of machines and control cabinets. The range consists of cable and fixed parts, contact inserts and housings; you will also find LAPP EPIC inserts here. Always verify compatibility for the specific catalogue numbers.

Insert, cable part and fixed socket

The range includes, for example, inserts EBM10CF00 and EBM10CP00, cable parts EBM10FU10 or EBM10FU30, fixed parts EBM10PM44 and cover EBA10TK. EMAS distinguishes a side entry for EBM10FU10 and a top entry for EBM10FU30. The choice of direction affects the cable routing, not automatically its electrical wiring.

The category also includes LAPP EPIC H-A 10 BS. Manufacturer card of the related variant H-A 10 BS DR PH1 states 10+PE. The exact order variant must be confirmed; do not transfer this value or its other parameters to all items of this group without checking.

First draw an interface table

For each position, record the contact number, function, potential, conductor designation and target terminal. Check whether the drawing shows a view of the mating face or of the conductor connection side. Simply redrawing the left and right columns may lead to a mirror-image mix-up. The numbers and the reference view of the manufacturer drawing are decisive.

Mark spare contacts explicitly in the documentation. Do not leave them as an unexplained gap that the next technician will take for a missing conductor. Store the same revision of the table with the cable harness and with the machine. When ordering a replacement, compare the actual version with the documentation, as an undocumented modification may have been made during operation.

A mounting detail that matters during servicing

Before choosing a housing, simulate plugging in and pulling out the connector with the cable already connected. Check access to the locking, the route of the harness and the possibility of opening adjacent covers. The gland must match the actual cable, not just the thread name. Do not load the insert with the pull of the cable harness.

On acceptance, check the wiring of each position against the table and the pair marking. LAPP warns of the risk of damage when disconnecting under load; the service procedure must ensure safe disconnection. The basic selection of the assembly is explained in the parent category Industrial connectors.

FAQ

Is a terminal insert a complete connector?

A separate insert may not include the housing, counterpart, gland or protective cover. Verify the scope of delivery according to the code.

Is the same number of pins on different brands proof of compatibility?

No. You need confirmation of the specific pair, not just the same number in the name.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.