Phone +420 774 723 123 Cart · 0 · empty

Sheet Steel Control Cabinets

EAE, Rittal and Schneider sheet steel control cabinets with mounting plate for electrical installation and automation. Choose by dimensions, depth, doors and protection rating.

Subcategories

Filters
Found 53 products
OUR TIP IN STOCK

EO806020, EAE, sheet steel distribution board, 800×600×200mm (H×W×D), RAL7035

Cat. no.: EO806020

EO806020, EAE: sheet steel control cabinet enclosure, outer dimensions 800×600×200mm (H×W×D), RAL7035, with mounting plate, protection rating IP66.

In stock 4 ks
155,14 €
excl. VAT · 187,72 € incl. VAT
OUR TIP IN STOCK

EM1008030, EAE, sheet steel control cabinet enclosure with mounting plate, 1000×800×300mm, RAL7035, IP66

Cat. no.: EM1008030

EM1008030, EAE, sheet steel control cabinet enclosure with mounting plate, 1000×800×300mm, RAL7035, IP66. EM series wall-mounted enclosure designed for fitting electrical devices.

In stock 2 ks
244,78 €
excl. VAT · 296,19 € incl. VAT
IN STOCK

EM1008020, EAE, sheet steel control cabinet enclosure with mounting plate, 1000×800×200mm, RAL7035, IP66

Cat. no.: EM1008020

EM1008020, EAE, sheet steel control cabinet enclosure with mounting plate, 1000×800×200mm, RAL7035, IP66. EM series wall-mounted enclosure designed for fitting electrical devices.

In stock 4 ks
245,56 €
excl. VAT · 297,13 € incl. VAT
OUR TIP IN STOCK

EM12010030, EAE, sheet steel control cabinet enclosure with mounting plate, 1200×1000×300mm, RAL7035, IP66

Cat. no.: EM12010030

EM12010030, EAE, sheet steel control cabinet enclosure with mounting plate, 1200×1000×300mm, RAL7035, IP66. EM series wall-mounted enclosure designed for fitting electrical devices.

In stock 2 ks
327,06 €
excl. VAT · 395,74 € incl. VAT
OUR TIP

EO604015, EAE, wall-mounted sheet steel control cabinet enclosure, 600×400×150mm, RAL7035

Cat. no.: EO604015

EO604015, EAE, wall-mounted sheet steel control cabinet enclosure, 600×400×150mm, RAL7035. EAE O Series sheet steel control cabinet enclosure with outer dimensions 600×400×150mm for mounting…

On request
108,02 €
excl. VAT · 130,71 € incl. VAT
OUR TIP

EO806030, EAE, wall-mounted sheet steel control cabinet enclosure, 800×600×300mm, RAL7035

Cat. no.: EO806030

EO806030, EAE, wall-mounted sheet steel control cabinet enclosure, 800×600×300mm, RAL7035. EAE O Series sheet steel control cabinet enclosure with outer dimensions 800×600×300mm for mounting…

On request
155,14 €
excl. VAT · 187,72 € incl. VAT

EO906015, EAE, wall-mounted sheet steel control cabinet enclosure 900×600×150mm, RAL7035

Cat. no.: EO906015

Sheet steel control cabinet enclosure EAE, EO series, with dimensions 900×600×150mm. The version is intended for space-saving wall mounting of electrical equipment. Surface colour: RAL7035.

On request
266,07 €
excl. VAT · 321,94 € incl. VAT

EO906020, EAE, sheet steel distribution board, 900×600×200mm (H×W×D), RAL7035

Cat. no.: EO906020

EO906020, EAE: sheet steel control cabinet enclosure, outer dimensions 900×600×200mm (H×W×D), RAL7035, with mounting plate, protection rating IP66.

On request
266,07 €
excl. VAT · 321,94 € incl. VAT

EO1007040, EAE, sheet steel distribution board, 1000×700×400mm (H×W×D), RAL7035

Cat. no.: EO1007040

EO1007040, EAE: sheet steel control cabinet enclosure, outer dimensions 1000×700×400mm (H×W×D), RAL7035, with mounting plate, protection rating IP66.

On request
282,44 €
excl. VAT · 341,75 € incl. VAT

EO1006025, EAE, sheet steel distribution board, 1000×600×250mm (H×W×D), RAL7035

Cat. no.: EO1006025

EO1006025, EAE: sheet steel control cabinet enclosure, outer dimensions 1000×600×250mm (H×W×D), RAL7035, with mounting plate, protection rating IP66.

On request
286,53 €
excl. VAT · 346,70 € incl. VAT

EO1206030, EAE, wall-mounted sheet steel control cabinet enclosure 1200×600×300mm, RAL7035

Cat. no.: EO1206030

Sheet steel control cabinet enclosure EAE, EO series, with dimensions 1200×600×300mm. The version is intended for larger wall-mounted assemblies of control, protective and installation elements…

On request
327,47 €
excl. VAT · 396,23 € incl. VAT

EO1008040, EAE, wall-mounted sheet steel control cabinet enclosure 1000×800×400mm, RAL7035

Cat. no.: EO1008040

Sheet steel control cabinet enclosure EAE, EO series, with dimensions 1000×800×400mm. The version is intended for larger wall-mounted assemblies of control, protective and installation elements…

On request
388,87 €
excl. VAT · 470,53 € incl. VAT

Prices include the recycling fee.

Sheet steel control cabinet enclosures

Choose a sheet steel control cabinet enclosure according to the drawing of the future fitting and the installation conditions. In this category you will find, among others, the designations EAE EO, EM and ET, Rittal AX and Schneider Electric NSYS3D. The presence of different series does not mean a common mounting system. For the order, the complete code, the current version and the list of supplied parts are decisive.

How to read the dimensions and scope of delivery

Distinguish the width, height and depth of the enclosure from the dimensions of the mounting plate. Manufacturers may use a different order of numbers in the name. Also measure components that protrude inward from the doors: operators, switches or connectors. Compare the sum of their depth and the depth of the opposite assembly with the design drawing, not just with the outer contour.

The specific Rittal AX 1045000 according to the manufacturer card, has outer dimensions of 400 × 500 × 210 mm and a mounting plate of 350 × 475 mm. The card lists the plate and the gland plate as included in the delivery. These data apply to the stated model; they must not be transferred to other AX enclosures or similarly sized EAE ones.

Practical procedure for designing the mounting plate

  1. Compile a list of devices with their dimensions and the required clearances from their documentation.
  2. Draw the rails, trunking, terminal rows and cable connection points.
  3. Verify access to the screws, labels and removable modules after complete wiring.
  4. Check for collisions with the hinges, lock and door-mounted devices.
  5. Record the planned reserve for expansion in a separate revision of the drawing.

The reserve can be expressed both as an area and as a specific free space. An equally large total area scattered between devices may not allow a single wider module to be added. In addition to the percentage, it is therefore useful to mark where a possible future assembly will actually fit.

Author's example: area versus layout

For a model plate of 300 × 400 mm, the total geometric area is 120 000 mm². If the design reserves 30 000 mm² as a reserve, that is 25 %. The calculation says nothing about the load capacity of the plate, thermal clearances or the available depth. This is an author's brief for comparing two layouts, not a recommended percentage or product dimension.

Doors, entries and surface finish

For operation, it is important whether the doors can be opened after adjacent equipment has been installed and whether the service technician can reach the terminals. When designing the wiring to the doors, take their full movement into account. Choose glands according to the cables and installation conditions; their dimensions and positions must be confirmed before the holes are made.

For a steel enclosure, also evaluate the environment with regard to the surface and intended mechanical modifications. Take the requirements for edge treatment, protective bonding and mounting of accessories from the documentation of the specific manufacturer. The mere presence of a metal plate or the colour of the surface is no proof of a correctly implemented protective function.

What to provide when requesting a replacement

State the manufacturer code, photos of the rating plate and entries, the dimension drawing and a list of accessories. An old designation with the note “replaced” is not enough to confirm mechanical conformity. Separately address cooling and heating; the dimensional requirement may not capture the thermal needs of the assembly.

FAQ

Is every enclosure supplied with a mounting plate?

Verify the scope of delivery for the selected code. Do not take the presence of a plate in an illustrative photo as a complete bill of materials.

Can I keep the old cut-outs when changing manufacturer?

Only after comparing the current drawings and mounting conditions. Similar outer dimensions alone do not confirm compatibility. For other designs, use the guide to control cabinet enclosures.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.