Phone +420 774 723 123 Cart · 0 · empty

Magnetic Sensors

Magnetic sensors respond to a permanent magnet, and since aluminium, stainless steel and plastic do not shield them, they detect the piston position through the wall of a pneumatic cylinder. You will find versions for C-slots and T-slots, band-mounted sensors for cylinders without slots and for tie rods, and threaded cylindrical versions M8 to M12 for mounting on stops and sliding machine parts. Unlike reed contacts, magnetoresistive sensors have no moving parts, so they do not wear and switch reliably even at high cycle frequencies. You can choose by PNP or NPN output, normally open or normally closed contact, cable length or M8 connector, and degree of protection IP67. We supply sensors from Lanbao, TECHNOLINE, SICK, Balluff, IFM and others. If needed, contact us and we will be happy to help you choose the right type for your application.

Subcategories

Filters
Found 81 products
−3 % OUR TIP IN STOCK

BMG2-012, TECHNOLINE, T-slot adapter, SMC

Cat. no.: BMG2-012

BMG2-012 TECHNOLINE – magnetic sensor, C. Industrial product for automation, detection or measurement.

In stock 5 or more pcs
0,71 € 0,74 €
excl. VAT · 0,86 € incl. VAT
OUR TIP IN STOCK

D-A93, SMC, magnetic sensor, 24VDC, Reed contact, yes, cable 0, 5m

Cat. no.: D-A93

D-A93 SMC – magnetic sensor, C, cable 0.5m. Industrial product for automation, detection or measurement.

In stock 5 or more pcs
8,15 €
excl. VAT · 9,86 € incl. VAT
−10 % OUR TIP IN STOCK

FT07DPO, LANBAO, magnetic sensor, 10-30VDC, PNP, NO, cable 2m

Cat. no.: FT07DPO

FT07DPO LANBAO – magnetic sensor, PNP, NO, T, cable 2m. Industrial product for automation, detection or measurement.

In stock 5 or more pcs
13,01 € 14,45 €
excl. VAT · 15,74 € incl. VAT
−10 % OUR TIP IN STOCK

TFT07DPO-50E1, LANBAO, magnetic sensor, 10-30VDC, PNP, NO, cable 0, 5m + connector M8/3

Cat. no.: TFT07DPO-50E1

TFT07DPO-50E1 LANBAO – magnetic sensor, M8, PNP, NO, T, cable 0.5m. Industrial product for automation, detection or measurement.

In stock 5 or more pcs
13,41 € 14,90 €
excl. VAT · 16,23 € incl. VAT
−10 % OUR TIP IN STOCK

FT07DLO-5M, LANBAO, FT07-DLO-5M, magnetic sensor, 10-30VDC, Reed contact, NO, cable 5m

Cat. no.: FT07DLO-5M

FT07DLO-5M LANBAO – magnetic sensor, NO, T, cable 5m. Industrial product for automation, detection or measurement.

In stock 5 or more pcs
13,41 € 14,90 €
excl. VAT · 16,23 € incl. VAT
−10 % OUR TIP IN STOCK

FT07-DLO, LANBAO, magnetic sensor, NO, cable 2 m PVC

Cat. no.: FT07-DLO

FT07-DLO – LANBAO magnetic proximity sensor. NO, cable 2 m PVC, IP67. In stock at Technoline – datasheet, technical support, invoice.

In stock 5 or more pcs
13,41 € 14,90 €
excl. VAT · 16,23 € incl. VAT
−3 % OUR TIP IN STOCK

TMS0002, TECHNOLINE, magnetic sensor, 10-30VDC, Reed contact, cable 2m

Cat. no.: TMS0002

TMS0002 TECHNOLINE – magnetic sensor, Reed contact, NO (normally open), C-slot, 3m PVC cable. Industrial product for automation, detection or measurement.

In stock 5 or more pcs
13,74 € 14,16 €
excl. VAT · 16,62 € incl. VAT
−3 % OUR TIP IN STOCK

TMS0005, TECHNOLINE, magnetic sensor, 10-30VDC, Reed contact, cable 2m

Cat. no.: TMS0005

TMS0005 TECHNOLINE – magnetic sensor, contact, NO (normally open), C-slot, 2 m PVC cable. Industrial product for automation, detection or measurement.

In stock 5 or more pcs
13,74 € 14,16 €
excl. VAT · 16,62 € incl. VAT
−10 % OUR TIP IN STOCK

FT07DPO-5M, LANBAO, magnetic sensor, 10-30VDC, PNP, NO, cable 5m

Cat. no.: FT07DPO-5M

FT07DPO-5M LANBAO – magnetic sensor, PNP, NO, T, cable 5m. Industrial product for automation, detection or measurement.

In stock 5 or more pcs
13,82 € 15,35 €
excl. VAT · 16,72 € incl. VAT
−10 % OUR TIP IN STOCK

FT07DPO-2MPUR, LANBAO, magnetic sensor, 10-30VDC, PNP, NO, cable 2m

Cat. no.: FT07DPO-2MPUR

FT07DPO-2MPUR LANBAO – magnetic sensor, PNP, NO, T, cable 2m. Industrial product for automation, detection or measurement.

In stock 5 or more pcs
14,63 € 16,25 €
excl. VAT · 17,70 € incl. VAT
OUR TIP IN STOCK

D-A93L, SMC, magnetic sensor, 24VDC, reed contact, yes, cable 3m

Cat. no.: D-A93L

D-A93L SMC – magnetic sensor, C, cable 3m. Industrial product for automation, detection or measurement.

In stock 1 ks
14,98 €
excl. VAT · 18,13 € incl. VAT
−3 % OUR TIP IN STOCK

TMS0003, TECHNOLINE, magnetic sensor, 10-30VDC, PNP, cable 0, 3m + connector M8/3

Cat. no.: TMS0003

TMS0003 TECHNOLINE – magnetic sensor, M8, PNP, NO (normally open), C-slot. Industrial product for automation.

In stock 5 or more pcs
15,41 € 15,88 €
excl. VAT · 18,64 € incl. VAT
−3 % OUR TIP IN STOCK

TMS0001, TECHNOLINE, magnetic sensor, 10-30VDC, PNP, cable 0, 3m + connector M8/3

Cat. no.: TMS0001

TMS0001 TECHNOLINE – magnetic sensor, M8, PNP, NO (normally open), C-slot. Industrial product for automation.

In stock 1 ks
16,28 € 16,78 €
excl. VAT · 19,70 € incl. VAT
−3 % OUR TIP IN STOCK

D-M9BSAPC, SMC, Magnetic sensor, for C-slot, cable 0, 3 m with connector M8

Cat. no.: D-M9BSAPC

D-M9BSAPC SMC – magnetic sensor, M8, C, cable 0.3 m. Industrial product for automation, detection or measurement.

In stock 5 or more pcs
25,02 € 25,79 €
excl. VAT · 30,27 € incl. VAT
OUR TIP IN STOCK

D-A93Z, SMC, magnetic sensor, reed position sensor

Cat. no.: D-A93Z

D-A93Z SMC – magnetic sensor, cable 5m. Industrial product for automation, detection or measurement.

In stock 2 ks
30,70 €
excl. VAT · 37,15 € incl. VAT
OUR TIP

SME-8M-DS-24V-K-0.3-M8D, FESTO, magnetic sensor 543861

Cat. no.: SME-8M-DS-24V-K-0,3-M8D

SME-8M-DS-24V-K-0.3-M8D from FESTO: magnetic sensor 543861. Parameters and availability at Technoline.cz.

On request
17,60 €
excl. VAT · 21,30 € incl. VAT
OUR TIP

D-A73CN, SMC, magnetic sensor, 10-30VDC

Cat. no.: D-A73CN

D-A73CN SMC – magnetic sensor. Industrial product for automation, detection or measurement.

On request
18,91 €
excl. VAT · 22,88 € incl. VAT

D-A73, SMC, magnetic sensor, position sensor

Cat. no.: D-A73

D-A73 SMC – magnetic sensor, cable 0.5 m. Industrial product for automation, detection or measurement.

On request
21,29 €
excl. VAT · 25,76 € incl. VAT
OUR TIP

D-M9PL, SMC, magnetic sensor, for C-slot, 24VDC, PNP, cable 3m

Cat. no.: D-M9PL

D-M9PL SMC – magnetic sensor, PNP, C, cable 3m. Industrial product for automation, detection or measurement.

On request
22,43 €
excl. VAT · 27,14 € incl. VAT

D-A93VL, SMC, magnetic sensor, position sensor

Cat. no.: D-A93VL

D-A93VL SMC – magnetic sensor. Industrial product for automation, detection or measurement.

On request
22,72 €
excl. VAT · 27,49 € incl. VAT

D-A73L, SMC, magnetic sensor, position sensor

Cat. no.: D-A73L

D-A73L SMC – magnetic sensor, cable 3 m. Industrial product for automation, detection or measurement.

On request
23,74 €
excl. VAT · 28,73 € incl. VAT

D-M9BL, SMC, magnetic sensor

Cat. no.: D-M9BL

D-M9BL SMC – magnetic sensor, C, cable 3m. Industrial product for automation, detection or measurement.

On request
25,38 €
excl. VAT · 30,71 € incl. VAT
OUR TIP

SME-8M-DS-24V-K-2.5-OE, FESTO, magnetic sensor, 543862

Cat. no.: SME-8M-DS-24V-K-2,5-OE

SME-8M-DS-24V-K-2.5-OE from FESTO: magnetic sensor, 543862. Parameters and availability at Technoline.cz.

On request
25,75 €
excl. VAT · 31,16 € incl. VAT
OUR TIP

D-Z73Z, SMC, magnetic sensor, Position sensor, cable 0, 5m

Cat. no.: D-Z73Z

D-Z73Z SMC – magnetic sensor, cable 0.5m. Industrial product for automation, detection or measurement.

On request
26,61 €
excl. VAT · 32,19 € incl. VAT

Prices include the recycling fee.

Magnetic Sensors

A magnetic sensor responds to a magnetic field, not automatically to every metal object. On a pneumatic cylinder it usually senses the magnet attached to the piston and passes information about its position to the control system. Suitability therefore depends on the specific cylinder, magnet, mounting and the electrical variant of the sensor.

Before choosing a sensor for a C- or T-slot, find out the exact designation of the actuator and whether it is designed for magnetic sensing. A sensor that fits into the slot does not automatically provide the required switching behaviour.

Reed and electronic sensors

A reed sensor uses mechanical contacts operated by a magnetic field. The electronic version evaluates the field with a semiconductor element and has no such moving contact. It may use, for example, the magnetoresistive or Hall principle depending on the specific design. The basic difference is described in the Festo technical overview.

However, a reed switch is not automatically an unlimited potential-free contact. The assembly may include an indicator or protective circuit, and the manufacturer specifies the permissible voltage, current and switching power. For the electronic version, the output type and suitability for the control system input must be verified. Protection, speed and service life cannot be generalised from the name of the technology.

Choose by series and actual application

C-slot, T-slot and mounting accessories

The slot designation is an important guide, but compatibility is confirmed by the combination of the sensor and actuator drawings. Check the dimensions, insertion method, fixing and space for the cable. A round body may require a designated bracket; a slot adapter, on the other hand, is not a sensing element itself.

When replacing, check whether the new sensor can be inserted in the required position without unauthorised modification of the actuator. Observe the specified tightening torque and the mounting procedure of the specific manufacturer; overtightening is not a way to compensate for an incorrectly chosen sensor shape. The arrangement of external sensing of the piston magnet is summarised in the SMC auto-switch overview.

The switching range is not a single geometric point

As the magnet passes, the sensor is usually active over a certain section. The switch-on and switch-off positions may also differ in the opposite direction of movement; this difference is related to hysteresis. For precise behaviour, therefore, verify both directions of movement, not just the point where the LED lights up when the magnet is moved by hand.

It is necessary to distinguish the repeatability of signalling from the accuracy of position measurement. A standard switching sensor reports the state within the detection range; it does not automatically provide the piston coordinate along the whole stroke. Continuous measurement requires a dedicated measuring solution and a suitable interface.

Fast movement and a short pulse: model calculation

Assume a hypothetical active range 5 mm long and a uniform passing speed of 0.5 m/s. The passage time is t = 0.005 / 0.5 = 0.010 s, i.e. 10 ms. This is only a model, not the declared switching range of any product offered.

Such a short signal can be a problem for the combination of sensor, input filter and PLC reading method. For example, a filter requiring continuous activation longer than 10 ms might not accept the model pulse. The actual design must include the sensor response time, input properties and the control program. Observing the LED alone does not prove that every pulse has been processed.

PNP, NPN, two-wire versions and connectors

For an electronic sensor, compare PNP or NPN with the type of control input. Check the NO/NC logic separately. For the two-wire version, the electrical conditions of the connected load must be taken into account according to the datasheet; the number of wires is not just a different way of routing the same signal.

For the connection, distinguish between a fixed cable, a short cable with a connector and an integrated connector. Check the length, material, pin assignment and any suitability for movement. The designation M8 by itself does not say which contact performs which function. The related range can be found in sensor cables and connectors.

What the piston signal actually confirms

Magnetic switching can confirm that the set detection range has been reached. However, by itself it does not prove that the clamping mechanism has developed the required force, that the part is correctly clamped or that the actuator has reached the mechanical stop. In the project, therefore, distinguish the requirement 'piston in position' from the requirement 'part securely clamped'.

Near other magnets or strong fields, include their actual operating states in the test as well. Resistance to interfering fields must be documented for the selected type, not derived from the general designation 'magnetic sensor'.

Checklist for a new installation and service

  1. Confirm the suitability of the sensor for the specific actuator and magnet.
  2. Compare the slot, bracket and installation space including the connection.
  3. Check the supply, output and its logic against the control input.
  4. Determine the position according to the instructions and verify switching on and off in both directions.
  5. Test the behaviour at actual speed and the evaluation in the PLC.
  6. Record the position and the complete code for repeatable service setting.

FAQ

Does a magnetic sensor detect an ordinary steel part?

Not automatically. In this application the magnetic field is decisive. For ordinary non-contact metal detection, compare inductive sensors.

Is it enough that the replacement fits the same slot?

No. Magnetic compatibility, electrical properties and the required detection range must also be verified.

For component selection prepare the type of actuator, original sensor, control input and the required function. A standard position sensor is not a safety component without a documented assessment. Mount and test the actuator according to the safe working procedures of the workplace.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.