Economic beacons - diameter 50mm EMAS (IP65)
In this branch, choose between individual optical parts and 50mm complete lights. The catalog includes modules IKM5KE, IKM5YE, or IKM5ME and ready assemblies with the designation XM03E. When designing the installation, follow the entire process: the light part, termination, base, and cable entry must match the intended use.
EMAS Catalogue, page 76, connects the IP65 to the letter E and removes variants with the horn.
The environment at the installation site decides
In the specification, write down where water or dirt may come from, how the device is cleaned, and whether the column will be exposed to sunlight or temperature changes. Compare these conditions with the documentation of the selected product. The category designation alone does not confirm resistance to cleaning agents, pressure washing, or long-term outdoor operation.
Also check the cable path from the stop to the distribution board. Mounting must not let the cable catch or transfer its tension to the contacts. Place connections so that they are accessible for inspection. If mounting requires a different holder or a new passage through the enclosure, include it in the overall assessment before ordering the column.
How to choose the delivery range
For a new installation with a clear requirement on colour and mode, review Compound beacons. For service of a specific floor, use Individual modules and accessories. When performing partial repair, keep the original parts list; another optical module may not match the existing sealing and mechanical connection.
When switching from the branch Economic beacons - diameter 50mm EMAS (IP54) do not assemble a replacement based on a similar image. Determine in advance whether you are replacing the entire column or just a part. Modification of one component alone does not confirm higher protection of the existing assembly. The required construction must be documented for the final combination.
Model example: signalisation at the filling workstation
The model workstation needs one light to warn of the requirement to replenish the packaging. As a candidate, you can check the red assembly IK51L024XM03E-R, which the catalogue lists for 24V AC/DC. The designer compares the mounting location with the cleaning procedure and prepares the cable routing so that the column does not interfere with material exchange. Verify the wiring and function of the specific variant; the model does not represent confirmation of its suitability for any filling line.
If the operator later also requires sound, a new requirement for the assembly arises. Before adding the acoustic part, it is necessary to document its electrical and mechanical compatibility and the protection of the result.
Frequently asked questions
Is the suffix in the name sufficient to determine compatibility?
No. Verify the base and accessories according to the manufacturer's specification and the entire delivered configuration. The complete code is the starting identification, not a replacement for the parts list and mounting instructions.
Does the protection also ensure signal recognition?
No. During testing, assess visibility from the operator's location, the anti-glare and the coverage by surrounding structures. The protection of the housing and the readability of the display are different requirements.
Is this a safety beacon?
It is operational signalisation, not a safety device. Even higher protection does not establish a safety function or the right to enter the machine.