Pneumatic accessories

SMC, Pneuflex and other pneumatic accessories – push-in fittings, threaded fittings, reducers, flow control valves, silencers, plugs, blow guns and suction cups. Choose by tube diameter and connection thread.

Podkategorie

Filtry
Znaleziono 696 produktów
NASZA PORADA DOSTĘPNY

TPC12-G02, TECHNOLINE, straight push-in fitting, tube Ø12mm, male thread G1/4

Nr kat.: TPC12-G02

TPC12-G02, TECHNOLINE: straight push-in fitting; tube Ø12mm, male thread G1/4. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 5 szt.
1,74 €
bez VAT · 2,11 € z VAT
NASZA PORADA DOSTĘPNY

TPL08-G03, TECHNOLINE, elbow push-in fitting 90°, tube Ø8mm, male thread G3/8

Nr kat.: TPL08-G03

TPL08-G03, TECHNOLINE: elbow push-in fitting 90°; tube Ø8mm, male thread G3/8. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 5 szt.
1,74 €
bez VAT · 2,11 € z VAT
NASZA PORADA DOSTĘPNY

TBESL-G01, TECHNOLINE, adjustable exhaust silencer, male thread G1/8

Nr kat.: TBESL-G01

TBESL-G01, TECHNOLINE: adjustable exhaust silencer. male thread G1/8. Use in pneumatic distribution and verified mounting criteria.

Dostępny 5 i więcej szt. · po 5 szt.
1,76 €
bez VAT · 2,13 € z VAT
NASZA PORADA DOSTĘPNY

TPD06-G03, TECHNOLINE, push-in T-fitting, thread in the run branch, tube Ø6mm, male thread G3/8

Nr kat.: TPD06-G03

TPD06-G03, TECHNOLINE: push-in T-fitting, thread in the run branch; tube Ø6mm, male thread G3/8. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 5 szt.
1,79 €
bez VAT · 2,16 € z VAT
NASZA PORADA DOSTĘPNY

TPB06-G03, TECHNOLINE, push-in T-fitting, thread in the bottom branch, tube Ø6mm, male thread G3/8

Nr kat.: TPB06-G03

TPB06-G03, TECHNOLINE: push-in T-fitting, thread in the bottom branch; tube Ø6mm, male thread G3/8. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 5 szt.
1,79 €
bez VAT · 2,16 € z VAT
NASZA PORADA DOSTĘPNY

TPC06-G01C, TECHNOLINE, miniature straight push-in fitting, tube Ø6mm, male thread G1/8

Nr kat.: TPC06-G01C

TPC06-G01C, TECHNOLINE: straight push-in fitting; tube Ø6mm, male thread G1/8. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 5 szt.
1,79 €
bez VAT · 2,16 € z VAT
NASZA PORADA DOSTĘPNY

TPC06-M5C, TECHNOLINE, miniature straight push-in fitting, tube Ø6mm, male thread M5

Nr kat.: TPC06-M5C

TPC06-M5C, TECHNOLINE: straight push-in fitting; tube Ø6mm, male thread M5. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 5 szt.
1,79 €
bez VAT · 2,16 € z VAT
NASZA PORADA DOSTĘPNY

TPC06-M6C, TECHNOLINE, miniature straight push-in fitting, tube Ø6mm, male thread M6

Nr kat.: TPC06-M6C

TPC06-M6C, TECHNOLINE: straight push-in fitting; tube Ø6mm, male thread M6. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 5 szt.
1,79 €
bez VAT · 2,16 € z VAT
NASZA PORADA DOSTĘPNY

TPC06-G04, TECHNOLINE, straight push-in fitting, tube Ø6mm, male thread G1/2

Nr kat.: TPC06-G04

TPC06-G04, TECHNOLINE: straight push-in fitting; tube Ø6mm, male thread G1/2. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 10 szt.
1,79 €
bez VAT · 2,16 € z VAT
DOSTĘPNY

TPM08, TECHNOLINE, bulkhead push-in fitting, 2× tube outer Ø8mm, panel mounting

Nr kat.: TPM08

TPM08, TECHNOLINE: bulkhead push-in fitting. 2× tube outer Ø8mm, panel mounting. Use in pneumatic distribution and verified mounting criteria.

Dostępny 5 i więcej szt. · po 5 szt.
1,82 €
bez VAT · 2,20 € z VAT
NASZA PORADA DOSTĘPNY

TBPU08, TECHNOLINE, straight all-metal fitting for Ø8mm tube

Nr kat.: TBPU08

TBPU08, TECHNOLINE, straight all-metal fitting for Ø8mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread. Metal body.

Dostępny 5 i więcej szt.
1,89 €
bez VAT · 2,29 € z VAT
NASZA PORADA DOSTĘPNY

TPC12-G03, TECHNOLINE, straight push-in fitting, tube Ø12mm, male thread G3/8

Nr kat.: TPC12-G03

TPC12-G03, TECHNOLINE: straight push-in fitting; tube Ø12mm, male thread G3/8. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 5 szt.
1,93 €
bez VAT · 2,34 € z VAT
NASZA PORADA DOSTĘPNY

TPL12-G01, TECHNOLINE, elbow push-in fitting 90°, tube Ø12mm, male thread G1/8

Nr kat.: TPL12-G01

TPL12-G01, TECHNOLINE: elbow push-in fitting 90°; tube Ø12mm, male thread G1/8. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 5 szt.
1,93 €
bez VAT · 2,34 € z VAT
NASZA PORADA DOSTĘPNY

TPL06-G04, TECHNOLINE, elbow push-in fitting 90°, tube Ø6mm, male thread G1/2

Nr kat.: TPL06-G04

TPL06-G04, TECHNOLINE: elbow push-in fitting 90°; tube Ø6mm, male thread G1/2. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 10 szt.
1,98 €
bez VAT · 2,39 € z VAT
DOSTĘPNY

TPGJ08-06, TECHNOLINE, plug-in reducer Ø8mm→Ø6mm

Nr kat.: TPGJ08-06

TPGJ08-06, TECHNOLINE, plug-in reducer Ø8mm→Ø6mm. A plug-in adapter into a push-in counterpart with a separate tube connection.

Dostępny 5 i więcej szt.
1,98 €
bez VAT · 2,40 € z VAT
DOSTĘPNY

TPZA12, TECHNOLINE, cross fitting for Ø12mm tube

Nr kat.: TPZA12

TPZA12, TECHNOLINE, cross fitting for Ø12mm tube. Cross connection of four pneumatic branches at a single point.

Dostępny 5 i więcej szt. · po 5 szt.
1,98 €
bez VAT · 2,40 € z VAT
NASZA PORADA DOSTĘPNY

TBPV04, TECHNOLINE, all-metal elbow fitting 90° for Ø4mm tube

Nr kat.: TBPV04

TBPV04, TECHNOLINE, all-metal elbow fitting 90° for Ø4mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Metal body.

Dostępny 5 i więcej szt.
1,98 €
bez VAT · 2,40 € z VAT
NASZA PORADA DOSTĘPNY

TBESL-G02, TECHNOLINE, adjustable exhaust silencer, male thread G1/4

Nr kat.: TBESL-G02

TBESL-G02, TECHNOLINE: adjustable exhaust silencer. male thread G1/4. Use in pneumatic distribution and verified mounting criteria.

Dostępny 5 i więcej szt. · po 5 szt.
2,02 €
bez VAT · 2,45 € z VAT
NASZA PORADA DOSTĘPNY

TPC08-G04, TECHNOLINE, straight push-in fitting, tube Ø8mm, male thread G1/2

Nr kat.: TPC08-G04

TPC08-G04, TECHNOLINE: straight push-in fitting; tube Ø8mm, male thread G1/2. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 10 szt.
2,02 €
bez VAT · 2,45 € z VAT
NASZA PORADA DOSTĘPNY

TPL12-G02, TECHNOLINE, elbow push-in fitting 90°, tube Ø12mm, male thread G1/4

Nr kat.: TPL12-G02

TPL12-G02, TECHNOLINE: elbow push-in fitting 90°; tube Ø12mm, male thread G1/4. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

Dostępny 5 i więcej szt. · po 5 szt.
2,02 €
bez VAT · 2,45 € z VAT
DOSTĘPNY

TPK10, TECHNOLINE, multi-way manifold for Ø10mm tube

Nr kat.: TPK10

TPK10, TECHNOLINE, multi-way manifold for Ø10mm tube. A multi-way compressed air distributor for clear connection of consumer branches.

Dostępny 5 i więcej szt. · po 5 szt.
2,03 €
bez VAT · 2,45 € z VAT
NASZA PORADA DOSTĘPNY

TPU16, TECHNOLINE, straight fitting for Ø16mm tube

Nr kat.: TPU16

TPU16, TECHNOLINE, straight fitting for Ø16mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

Dostępny 5 i więcej szt. · po 5 szt.
2,07 €
bez VAT · 2,51 € z VAT
NASZA PORADA DOSTĘPNY

TPV16, TECHNOLINE, elbow fitting 90° for Ø16mm tube

Nr kat.: TPV16

TPV16, TECHNOLINE, elbow fitting 90° for Ø16mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

Dostępny 5 i więcej szt. · po 5 szt.
2,07 €
bez VAT · 2,51 € z VAT

Ceny zawierają opłatę recyklingową.

Pneumatic accessories

Pneumatic accessories connect individual parts of the air circuit and help adapt its arrangement to a specific machine. When selecting, you need to know not only the part designation, but also both connected counterparts, the required function and operating conditions. A similar appearance of fittings or the same brand do not by themselves confirm interchangeability. This category is a signpost for line design, air distribution, flow adjustment and vacuum gripping.

Select the branch according to the task in the circuit

  • Threaded fitting: connection to a specific threaded port of the equipment.
  • Push-in fittings: selecting a connection for the corresponding pipe or tube.
  • Bulkhead fittings: passing the line through a panel with resolved fixing.
  • Reducing fittings: connecting different connection sizes.
  • Flow control valves: flow adjustment taking into account the direction and function of the valve.
  • Silencers: exhaust accessories, which are also selected according to flow requirements.
  • Blanking plugs: closing the connection with a corresponding version.
  • Blow gun: manual work with air according to the rules of the given workplace.
  • Pneumatic suction cups: contact of the vacuum gripper with the surface of the handled part.

Three checks before ordering

Mechanical interface: record the full connection designation on both sides. For the tube, distinguish the outer and inner diameter; for the thread, its type, size and sealing method. Also check the space for mounting and service; the correct part may not be suitable for an installation that is too tight.

Function: draw where the medium should flow from and to. Connecting, branching, blanking, throttling and gripping are different tasks. For more complex accessories, compare the diagram and the full order code, not just the first part of the name.

Operating conditions: verify the permissible medium, pressure, temperature and environment for the specific version in the manufacturer's documentation. Assess use in vacuum separately. Do not derive the permitted range of the whole assembly from a parameter of one of its elements.

Model list of connection points

Let us consider four workstations, each with two separate lines. If each line forms one uninterrupted section, eight sections have a total of sixteen ends to connect. Dividing all eight sections into two parts adds eight intermediate fittings and sixteen more tube ends. This is our own inventory example, not a calculation of pressure loss or probability of leakage. It helps reveal missing counterparts and distinguish a spare piece from a part actually needed in the assembly.

Mounting and troubleshooting

Before intervention, shut down the equipment according to its instructions and secure it against unexpected movement. Disconnect lines only after safely removing pressure; for vacuum gripping, first secure the transported object. Take the mounting procedure, tightening and insertion check from the instructions of the specific accessory. After assembly, verify tightness, actual function and maintenance access during controlled commissioning.

In case of a leak, first determine its location, then check the counterpart, line size, seal condition and mechanical stress on the joint. In case of slow movement, monitor the whole supply and exhaust. Random replacement of one part without verifying the cause can leave the original problem in another part of the circuit.

FAQ

Can I replace a fitting based on a photo?

A photo helps determine the shape. For ordering, however, add dimensions, exact connection, function and operating limitations. For a replacement, record the original code and also compare the counterpart.

How to prepare documentation for selecting accessories?

Attach a simple circuit diagram, a list of connections, tube sizes and operating conditions. Mark what you already have and what should be part of the delivery; this makes the list and the compatibility check more precise.

Pliki cookies na tej stronie

Techniczne pliki cookies są potrzebne do działania koszyka i zamówienia — są używane zawsze. Analityczne pliki cookies pokazują nam, których stron ludzie szukają i gdzie się gubią, i pomagają nam ulepszać sklep. Użyjemy ich tylko wtedy, gdy na to pozwolisz. Więcej w zasadach przetwarzania danych.