TPU06, TECHNOLINE, straight fitting for Ø6mm tube
- Our price excl. VAT
- 0,59 €
- incl. VAT 21 %
- 0,71 €
Minimum order 10 pcs — can only be ordered in multiples.
Description
TPU06, TECHNOLINE, straight fitting for Ø6mm tube
straight fittingØ6mmup to 10bar−20 to +80°CTPU06 is a straight fitting of the TPU series under the brand TECHNOLINE. Extending a Ø6mm route is done by directly connecting two separate tube ends without a change of direction. For a clean joint, it is important that both tubes do not rest against an uneven cut at the stop.
How this element works
With a correctly square-cut tube, the integrated collet presses its outer sheath against the seal. The outer diameter of the tube is decisive, not its inner bore.
Technical parameters TPU06
| Parameter | Value |
|---|---|
| Order code | TPU06 |
| Manufacturer (brand) | TECHNOLINE |
| Product type | straight fitting |
| Connection diameters for the tube | 2× Ø6mm |
| Number of push-in connections | 2 |
| Body design | composite – technical plastic and metal clamping elements |
| Maximum working pressure of the fitting | 1.0MPa (10bar) |
| Proof pressure | 3.0MPa (30bar), proof |
| Operating medium temperature | −20 to +80°C (composite fitting series) |
Mounting, correct routing and tube selection
Tube outer diameter Ø6mm is essential for the tightness of the push-in connection; the inner diameter affects the flow but does not determine the collet size. Cut the tube square, insert it up to the stop and mechanically verify retention.
Choose a suitable tube by the outer diameter Ø6mm; matching PU tubes are in the TECHNOLINE range.
For medium diameters, a compromise between mounting space, inner tube bore and losses in branches is important when selecting.
The maximum pressure of the fitting must not automatically be applied to the whole assembly: the tube, thread seal, temperature and any control elements are also decisive.
Why choose this particular version
TPU06 directly connects two Ø6mm pneumatic tubes without the need for a thread. Use it for extending or repairing a straight line when you do not want to create a sharp elbow or unnecessary mounting bend in the route.
What is decisive when selecting
The push-in joint seals around the tube circumference, so the OD is important for selection; the inner diameter determines the flow bore. When choosing between sizes, compare not only the OD for the fitting, but also the actual inner diameter and length of the tube.
Where the fitting is used – connection examples
- Production and assembly lines: extension of the compressed air line to the actuator.
- Pneumatic distribution service: replacement of a damaged part of a tube without replacing the whole route.
- Automated workstations: clear routing of short connections between components.
How to connect and check
- Switch off the air supply, depressurise the distribution and remove the damaged or deformed section.
- Cut the Ø6mm tube square with a suitable cutter; do not damage its outer sheath.
- Insert both ends up to the stop into the correct ports and pull lightly to check retention.
- When restoring operation, check tightness and secure the line against tension.
Note when selecting: A match of the tube outer diameter alone does not verify its material, operating temperature, pressure or resistance to the medium.
Related products from the TECHNOLINE e-shop
- TPV06 – Elbow fitting 90° Ø6mm
Dimensionally related Ø6mm element with a different function or version; does not replace checking the whole assembly.
- TPE06 – T-connector 3× Ø6mm
Same nominal Ø6mm, but it is a branch element; not a direct replacement.
- TPU6X4BL – PU tube 6×4mm, blue
Tube with an outer diameter of Ø6mm; before use, also verify material, pressure and temperature.
- TPY06 – Y-connector 3× Ø6mm
Same nominal Ø6mm, but it is a branch element; not a direct replacement.
- Polyurethane pneumatic tubes
Tube selection by outer diameter and documented limits of use.
- Branch fittings
Other shapes of pneumatic fittings for distribution design; these are not automatic replacements.
Frequently asked questions – TPU06
Extending a Ø6mm route is done by directly connecting two separate tube ends without a change of direction.
For this variant, the outer diameter Ø6mm is decisive; the dimension must not be confused with the inner bore of the tube.
Technical parameters
| Objednací kód | TPU06 |
|---|---|
| Výrobce | TECHNOLINE |
| Hose diameter | 6mm |
| Material | Plastic |
| Shape | Straight |
Ask about this product
Related products
TPU04, TECHNOLINE, straight fitting for Ø4mm tube
TPU04
0,54 €
excl. VAT · 0,65 € incl. VAT
TPU08, TECHNOLINE, straight fitting for Ø8mm tube
TPU08
0,63 €
excl. VAT · 0,76 € incl. VAT
TPU10, TECHNOLINE, straight fitting for Ø10mm tube
TPU10
0,81 €
excl. VAT · 0,98 € incl. VAT
TPU12, TECHNOLINE, straight fitting for Ø12mm tube
TPU12
0,90 €
excl. VAT · 1,09 € incl. VAT
TBPU04, TECHNOLINE, straight all-metal fitting for Ø4mm tube
TBPU04
1,17 €
excl. VAT · 1,42 € incl. VAT