ASB2211-G02-08D, SMC, elbow flow control valve for pneumatic actuator, tube Ø8mm, thread G1/4
- Our price excl. VAT
- 23,95 €
- incl. VAT 21 %
- 28,97 €
Description
ASB2211-G02-08D, SMC, elbow flow control valve for pneumatic actuator, tube Ø8mm, thread G1/4
ASB2211-G02-08D is used for adjusting the flow at the working port of a pneumatic actuator. The selection is based on the corresponding body thread and the diameter of the outgoing tube. Version ASB2211-G02-08D has the interface tube Ø8mm / thread G1/4. This combination distinguishes the product from other regulators of the same series.
Where and why to use this particular version
Regulation directly on the actuator shortens the section between the piston and the throttling element. Unlike an in-line valve, the connection to the threaded port is part of the installation.
Practical decision criterion: For connection, a PU tube with outer Ø8mm is dimensionally relevant; assess the type and size of ports for the whole assembly.
Technical parameters of the specific variant
| Order code | ASB2211-G02-08D |
|---|---|
| Brand | SMC |
| Catalogue series | SMC ASB |
| Version | elbow flow control valve for pneumatic actuator |
| Tube outer diameter | Ø8mm |
| Connection thread | G1/4 |
| Exact version | tube Ø8mm, thread G1/4 |
Variant selection, mounting and operation
It is necessary to verify the directional action and all components of the specific ASB during mounting according to the diagram.
Set the regulation at a verified actuator speed, respecting the safe end position. A change in flow may also be caused by increased clogging, leakage, incorrect throttling direction or a tube line that is too small.
Related goods and choice of compatible accessories
- TPU8X5.5B – dimensional recommendation PU tube outer Ø8mm; assess working limits before ordering.
- ASB2211-G01-08D – item of the same series; compare function, diameter or thread – not an automatic replacement.
Other variants: Throttle and control valves · Reducing fittings
Frequently asked questions about this variant
For variant ASB2211-G02-08D, the version "tube Ø8mm, thread G1/4" is decisive. When mounting, observe the flow direction marks and the corresponding ports.
Only if all parameters match: control function, connection and flow direction. The same tube diameter for ASB2211-G02-08D is not enough for a direct replacement.
Before replacing ASB2211-G02-08D, compare the full order code, connection, design function and the relevant operating conditions. Another series may look the same but have different parameters.
Technical parameters
| Objednací kód | ASB2211-G02-08D |
|---|---|
| Výrobce | SMC |
Ask about this product
Related products
TJSC06-M5, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø6mm, thread M5
TJSC06-M5
2,46 €
excl. VAT · 2,97 € incl. VAT
TJSC04-M5, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread M5
TJSC04-M5
2,46 €
excl. VAT · 2,97 € incl. VAT
TJSC06-M6, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø6mm, thread M6
TJSC06-M6
2,46 €
excl. VAT · 2,97 € incl. VAT
TJSC04-M6, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread M6
TJSC04-M6
2,51 €
excl. VAT · 3,03 € incl. VAT
TJSC04-G01, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread G1/8
TJSC04-G01
2,65 €
excl. VAT · 3,21 € incl. VAT