Phone +420 774 723 123 Cart · 0 · empty
AS2201FSG-01-06S, SMC, elbow one-way speed controller with check function, tube Ø6mm, thread R1/8, meter-out (exhaust throttling), stainless steel version with setting scale

AS2201FSG-01-06S, SMC, elbow one-way speed controller with check function, tube Ø6mm, thread R1/8, meter-out (exhaust throttling), stainless steel version with setting scale

Cat. no.: AS2201FSG-01-06S
Manufacturer: SMC
On request
Our price excl. VAT
24,97 €
incl. VAT 21 %
30,21 €
Weight 0.01 kg
HS Code (Taric) 84812090
Country of origin JP

Description

AS2201FSG-01-06S, SMC, elbow one-way speed controller with check function, tube Ø6mm, thread R1/8, meter-out (exhaust throttling), stainless steel version with setting scale

Ø6mmR1/8meter-outSMC

AS2201FSG-01-06S is fitted in a pneumatic circuit to control actuator speed. The typical elbow AS variant connects the cylinder port with the tube and influences the flow in the chosen direction by means of a throttling setting. Version AS2201FSG-01-06S has the interface tube Ø6mm / thread R1/8 / meter-out (exhaust throttling) / stainless steel version with setting scale. This combination distinguishes the product from other regulators of the same series.

Where and why to use this particular version

Adjusting directly at the cylinder makes it easier to check its speed during commissioning. The versions marked 201 and 211 differ in control direction; do not confuse them when ordering. Version AS-FSG combines stainless steel parts with a readable scale for repeatable setting.

Practical decision criterion: For connection, a PU tube with outer Ø6mm is dimensionally relevant; assess the type and size of ports for the whole assembly.

Technical parameters of the specific variant

Order code AS2201FSG-01-06S
Brand SMC
Catalogue series SMC AS
Version elbow one-way speed controller with check function
Version elbow – push-in tube and threaded port
Tube outer diameter Ø6mm
Connection thread R1/8
Control direction (documented key) meter-out (exhaust throttling)
Design of the AS-FSG series stainless steel version with setting scale
Exact version tube Ø6mm, thread R1/8, meter-out (exhaust throttling), stainless steel version with setting scale

Variant selection, mounting and operation

Confirm the correct throttling direction (supply vs. exhaust) according to the diagram of the exact order code, not by the general appearance of the valve.

Set the regulation at a verified actuator speed, respecting the safe end position. A change in flow may also be caused by increased clogging, leakage, incorrect throttling direction or a tube line that is too small.

Related goods and choice of compatible accessories

  • TPU6X4B – dimensional recommendation PU tube outer Ø6mm; assess working limits before ordering.
  • AS2002F-04 – item of the same series; compare function, diameter or thread – not an automatic replacement.
  • AS2002F-06 – item of the same series; compare function, diameter or thread – not an automatic replacement.
  • AS2002F-06A – item of the same series; compare function, diameter or thread – not an automatic replacement.
  • AS2002FS-06 – item of the same series; compare function, diameter or thread – not an automatic replacement.

Other variants: Throttle and control valves · Reducing fittings

Frequently asked questions about this variant

Where is this control element installed?

For variant AS2201FSG-01-06S, the version "tube Ø6mm, thread R1/8, meter-out (exhaust throttling), stainless steel version with setting scale" is decisive. When mounting, observe the flow direction marks and the corresponding ports.

Can it be replaced by another flow control valve?

Only if all parameters match: control function, connection and flow direction. The same tube diameter for AS2201FSG-01-06S is not enough for a direct replacement.

What needs to be compared with the original part?

Before replacing AS2201FSG-01-06S, compare the full order code, connection, design function and the relevant operating conditions. Another series may look the same but have different parameters.

Technical parameters

Objednací kódAS2201FSG-01-06S
VýrobceSMC

Ask about this product

Ask us about technical parameters, compatibility with your equipment, availability or a price for larger quantities. It helps if you tell us what application you need the product for — if it does not fit, we will recommend a more suitable type.

Kód k opsání. Pokud ho nepřečtete, klikněte na Načíst nový kód.
The question relates to product AS2201FSG-01-06S

By sending you agree to the processing of the data provided for the purpose of handling your question. We do not pass the data on to third parties.

Related products

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.