ASP330F-01-06S, SMC, speed controller with pilot-operated check valve, tube Ø6mm, thread R1/8
- Our price excl. VAT
- 39,71 €
- incl. VAT 21 %
- 48,04 €
Description
ASP330F-01-06S, SMC, speed controller with pilot-operated check valve, tube Ø6mm, thread R1/8
ASP330F-01-06S combines flow adjustment and a pilot-controlled check function. It is intended for circuits where it is necessary to address both the speed of movement of the pneumatic actuator and the behaviour when the control pressure changes. Version ASP330F-01-06S has the interface tube Ø6mm / thread R1/8. This combination distinguishes the product from other regulators of the same series.
Where and why to use this particular version
One body combines functions that would otherwise have to be handled separately. In the design, take into account the control/pilot port, not just the connection of the working tube.
Practical decision criterion: For connection, a PU tube with outer Ø6mm is dimensionally relevant; assess the type and size of ports for the whole assembly.
Technical parameters of the specific variant
| Order code | ASP330F-01-06S |
|---|---|
| Brand | SMC |
| Catalogue series | SMC ASP |
| Version | speed controller with pilot-operated check valve |
| Function | speed control + pilot check valve |
| Pilot port | M5×0,8 |
| Tube outer diameter | Ø6mm |
| Connection thread | R1/8 |
| Exact version | tube Ø6mm, thread R1/8 |
Variant selection, mounting and operation
Without checking the control diagram, it cannot serve as a generally certified safety element for holding a load.
Set the regulation at a verified actuator speed, respecting the safe end position. A change in flow may also be caused by increased clogging, leakage, incorrect throttling direction or a tube line that is too small.
Related goods and choice of compatible accessories
- TPU6X4B – dimensional recommendation PU tube outer Ø6mm; assess working limits before ordering.
Other variants: Throttle and control valves · Reducing fittings
Frequently asked questions about this variant
For variant ASP330F-01-06S, the version "tube Ø6mm, thread R1/8" is decisive. When mounting, observe the flow direction marks and the corresponding ports.
Only if all parameters match: control function, connection and flow direction. The same tube diameter for ASP330F-01-06S is not enough for a direct replacement.
Before replacing ASP330F-01-06S, compare the full order code, connection, design function and the relevant operating conditions. Another series may look the same but have different parameters.
Technical parameters
| Objednací kód | ASP330F-01-06S |
|---|---|
| Výrobce | SMC |
Ask about this product
Related products
TJSC06-M5, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø6mm, thread M5
TJSC06-M5
2,46 €
excl. VAT · 2,97 € incl. VAT
TJSC04-M5, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread M5
TJSC04-M5
2,46 €
excl. VAT · 2,97 € incl. VAT
TJSC06-M6, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø6mm, thread M6
TJSC06-M6
2,46 €
excl. VAT · 2,97 € incl. VAT
TJSC04-M6, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread M6
TJSC04-M6
2,51 €
excl. VAT · 3,03 € incl. VAT
TJSC04-G01, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread G1/8
TJSC04-G01
2,65 €
excl. VAT · 3,21 € incl. VAT