AS2052F-08, SMC, in-line speed / flow regulator, tube Ø8mm, body size 205
- Our price excl. VAT
- 14,12 €
- incl. VAT 21 %
- 17,09 €
Description
AS2052F-08, SMC, in-line speed / flow regulator, tube Ø8mm, body size 205
AS2052F-08 belongs to SMC in-line speed controllers. It is mounted in the distribution route instead of directly on the threaded port of the cylinder; this allows the behaviour of the pneumatic circuit to be adjusted at the installation point. Version AS2052F-08 has the interface tube Ø8mm / body size 205. This combination distinguishes the product from other regulators of the same series.
Where and why to use this particular version
For subsequent adjustment of a circuit, an in-line regulator may be more advantageous than replacing all fittings on the cylinder. For the type with push-in ports, the tube is connected at both ends; for the threaded in-line model, corresponding fittings are used.
Practical decision criterion: For connection, a PU tube with outer Ø8mm is dimensionally relevant; assess the type and size of ports for the whole assembly.
Technical parameters of the specific variant
| Order code | AS2052F-08 |
|---|---|
| Brand | SMC |
| Catalogue series | SMC AS |
| Version | in-line speed / flow regulator |
| Arrangement | in-line – inserted into a tube or pipe route |
| Tube outer diameter | Ø8mm |
| Body size according to the order key | 205 |
| Exact version | tube Ø8mm, body size 205 |
Variant selection, mounting and operation
The body size contained in the code is not automatically the size of the connection thread. When selecting, distinguish in-line variants AS*002F from elbow AS*201F.
Set the regulation at a verified actuator speed, respecting the safe end position. A change in flow may also be caused by increased clogging, leakage, incorrect throttling direction or a tube line that is too small.
Related goods and choice of compatible accessories
- TPU8X5.5B – dimensional recommendation PU tube outer Ø8mm; assess working limits before ordering.
- AS2002F-04 – item of the same series; compare function, diameter or thread – not an automatic replacement.
- AS2002F-06 – item of the same series; compare function, diameter or thread – not an automatic replacement.
- AS2002F-06A – item of the same series; compare function, diameter or thread – not an automatic replacement.
- AS2002FS-06 – item of the same series; compare function, diameter or thread – not an automatic replacement.
Other variants: Throttle and control valves · Reducing fittings
Frequently asked questions about this variant
For variant AS2052F-08, the version "tube Ø8mm, body size 205" is decisive. When mounting, observe the flow direction marks and the corresponding ports.
Only if all parameters match: control function, connection and flow direction. The same tube diameter for AS2052F-08 is not enough for a direct replacement.
Before replacing AS2052F-08, compare the full order code, connection, design function and the relevant operating conditions. Another series may look the same but have different parameters.
Technical parameters
| Objednací kód | AS2052F-08 |
|---|---|
| Výrobce | SMC |
Ask about this product
Related products
TJSC06-M5, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø6mm, thread M5
TJSC06-M5
2,46 €
excl. VAT · 2,97 € incl. VAT
TJSC04-M5, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread M5
TJSC04-M5
2,46 €
excl. VAT · 2,97 € incl. VAT
TJSC06-M6, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø6mm, thread M6
TJSC06-M6
2,46 €
excl. VAT · 2,97 € incl. VAT
TJSC04-M6, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread M6
TJSC04-M6
2,51 €
excl. VAT · 3,03 € incl. VAT
TJSC04-G01, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread G1/8
TJSC04-G01
2,65 €
excl. VAT · 3,21 € incl. VAT