TPP12, TECHNOLINE, plug-in plug for push-in port, Ø12mm stem for push-in port
- Our price excl. VAT
- 0,29 €
- incl. VAT 21 %
- 0,36 €
Minimum order 5 pcs — can only be ordered in multiples.
Description
TPP12, TECHNOLINE, plug-in plug for push-in port, Ø12mm stem for push-in port
TPP12 is inserted into an unused push-in collet with a nominal diameter of Ø12mm. It allows a free connection to be temporarily taken out of use without mounting a separate threaded fitting.
Where and why to use this particular version
A port plug is used where a push-in fitting is already installed and no tube is connected. It is not inserted into the tube and is not a replacement for a threaded port plug.
Why choose TECHNOLINE pneumatic elements
When supplementing a pneumatic distribution, it is useful to select plugs together with push-in and threaded elements: one closes a fitting port, another the tube itself and another a female thread. TECHNOLINE lists these types separately so that the choice by interface is unambiguous.
Practical decision criterion: This size requires push-in elements for an outer Ø12mm, not for another diameter.
Technical parameters of the specific variant
| Order code | TPP12 |
|---|---|
| Brand | TECHNOLINE |
| Catalogue series | PP |
| Version | plug-in plug for push-in port |
| Plug-in diameter | Ø12mm |
| Location | into the push-in port of a fitting for Ø12mm tube |
| Exact version | Ø12mm stem for push-in port |
Variant selection, mounting and operation
For sealing, it must correspond to the specific type of push-in port and its nominal size. Under pressure, check the securing of the plug-in part.
Always depressurise the circuit before closing a port. When later restoring the connection, check the seal and the undamaged thread or push-in seat.
Related goods and choice of compatible accessories
- TPP04 – item of the same series; compare function, diameter or thread – not an automatic replacement.
- TPP06 – item of the same series; compare function, diameter or thread – not an automatic replacement.
- TPP08 – item of the same series; compare function, diameter or thread – not an automatic replacement.
- TPP10 – item of the same series; compare function, diameter or thread – not an automatic replacement.
Other variants: Blanking plugs and plugs
Frequently asked questions about this variant
TPP12 is a plug-in plug for a push-in port; the version is "Ø12mm stem for push-in port". Port plugs and tube end plugs are not the same.
For TPP12, check the correct connection interface, seating and securing. For the threaded version, also the seal type and thread type.
Before replacing TPP12, compare the full order code, connection, design function and the relevant operating conditions. Another series may look the same but have different parameters.
Technical parameters
| Objednací kód | TPP12 |
|---|---|
| Výrobce | TECHNOLINE |
| Hose diameter | 12mm |
Ask about this product
Related products
TPP06, TECHNOLINE, plug-in plug for push-in port, Ø6mm stem for push-in port
TPP06
0,25 €
excl. VAT · 0,30 € incl. VAT
TPP10, TECHNOLINE, plug-in plug for push-in port, Ø10mm stem for push-in port
TPP10
0,25 €
excl. VAT · 0,30 € incl. VAT
TPP04, TECHNOLINE, plug-in plug for push-in port, Ø4mm stem for push-in port
TPP04
0,25 €
excl. VAT · 0,30 € incl. VAT
TPP08, TECHNOLINE, plug-in plug for push-in port, Ø8mm stem for push-in port
TPP08
0,25 €
excl. VAT · 0,30 € incl. VAT
TSPIM-G01, TECHNOLINE, threaded plug with internal hexagon, male thread G1/8, closing a hole, TSPIM version
TSPIM-G01
0,28 €
excl. VAT · 0,33 € incl. VAT