Phone +420 774 723 123 Cart · 0 · empty

Individual modules and accessories

Modules, bases and accessories for APT TL-70 signal towers for assembling, extending or repairing the tower.

Filters
Found 16 products
OUR TIP IN STOCK

TL-70C, APT, end-cap for signalling beacons TL-70

Cat. no.: TL-70C

TL-70C APT - end protective cover for beacons TL-70. Top end of the assembly with optical modules; no horn is required at the end.

In stock 5 or more pcs
5,24 €
excl. VAT · 6,34 € incl. VAT
OUR TIP IN STOCK

TL-SZ-2, TECHNOLINE, plastic mounting foot for signalling beacons APT, 110 mm

Cat. no.: TL-SZ-2

TL-SZ-2 TECHNOLINE - plastic mounting foot for signalling beacons APT, length 110 mm and stand 70 mm. For fixed installation of industrial signalling.

In stock 5 or more pcs
7,90 €
excl. VAT · 9,56 € incl. VAT
OUR TIP IN STOCK

TL-70L, APT, connecting base with terminals for signalling beacons TL-70

Cat. no.: TL-70L

TL-70L APT - connection base with screw terminals for beacons TL-70. Connection up to 5 modules, 70 mm width, IP65 cover.

In stock 5 or more pcs
10,40 €
excl. VAT · 12,58 € incl. VAT
OUR TIP IN STOCK

TL@-@ 70LL / 23G, APT, green LED module for signalling beacons TL@-@ 70, permanently illuminating, 24 V AC / DC

Cat. no.: TL-70LL/23G

TL-70LL / 23G APT - green LED module for beacons TL-70, permanently illuminating, 24 V AC / DC, Ø 70 mm, IP65. For assembly and expansion of signalling columns.

In stock 5 or more pcs
30,68 €
excl. VAT · 37,12 € incl. VAT
OUR TIP IN STOCK

TL-70LL / 23B, APT, blue LED module for signalling beacons TL@-@ 70, permanently illuminating, 24 V AC / DC

Cat. no.: TL-70LL/23B

TL-70LL / 23B APT - blue LED module for beacons TL-70, permanently illuminating, 24 V AC / DC, Ø 70 mm, IP65. For assembly and expansion of signalling columns.

In stock 5 or more pcs
30,68 €
excl. VAT · 37,12 € incl. VAT
OUR TIP IN STOCK

TL@-@ 70LL / 23Y, APT, yellow LED module for signalling beacons TL@-@ 70, permanently illuminating, 24 V AC / DC

Cat. no.: TL-70LL/23Y

TL-70LL / 23Y APT - yellow LED module for beacons TL-70, permanently illuminating, 24 V AC / DC, Ø 70 mm, IP65. For assembly and expansion of signalling columns.

In stock 5 or more pcs
30,68 €
excl. VAT · 37,12 € incl. VAT
OUR TIP IN STOCK

TL-70LL / 23W, APT, white LED module for signalling beacons TL@-@ 70, permanently illuminating, 24 V AC / DC

Cat. no.: TL-70LL/23W

TL-70LL / 23W APT - white LED module for beacons TL-70, permanently illuminating, 24 V AC / DC, Ø 70 mm, IP65. For assembly and expansion of signalling columns.

In stock 5 or more pcs
30,68 €
excl. VAT · 37,12 € incl. VAT
OUR TIP IN STOCK

TL-70LF / 23Y, APT, yellow LED module for signalling beacons TL@-@ 70, flashing, 24 V AC / DC

Cat. no.: TL-70LF/23Y

TL-70LF / 23Y APT - yellow LED module for beacons TL-70, flashing, 24 V AC / DC, Ø 70 mm, IP65. For assembly and expansion of signalling columns.

In stock 5 or more pcs
36,82 €
excl. VAT · 44,55 € incl. VAT

EM- IKAM01, TECHNOLINE, plastic mounting foot for signalling beacons APT, length 110 mm

Cat. no.: EM-IKAM01

EM-IKAM01 TECHNOLINE - plastic mounting foot; compatibility / determination: Beacons APT signalling, length 110 mm. Installation accessories for industrial signalling.

On request
28,65 €
excl. VAT · 34,67 € incl. VAT

Prices include the recycling fee.

Individual modules and accessories

Select individual parts according to their role in the assembly: the lighting module displays the status, the acoustic module alerts with sound, the base provides electrical connection, and the mounting parts determine the pole position. When repairing, first separate the signalling part from the control error or cable harness. An order based solely on the color of the old cover may lead to a different lighting mode.

What is in this category

The list includes TL-70LL/23R, G, Y, B, and W for permanent light and corresponding TL-70LF/23 variants for blinking. It also includes acoustic TL-70BI/23 and TL-70BC/23, cover TL-70C, and mounting legs TL-SZ-2 and EM-IKAM01. For the listed lighting and acoustic variants, 24 V AC/DC is declared.

Connection part TL-70L has bolt terminals.

Classification in the series shows the superior category Beacon - 70mm APT diameter (IP65)If you need to order a finished configuration, proceed to Compound beacons.

How to assemble a piece and verify compatibility

For a new assembly, rewire the base, required lighting panels, optional acoustic part, correct termination, and method of securing. For each item, distinguish whether it is already part of the delivery of another item. A mounting leg alone does not replace an electrical base. Before replacement, compare the full code of the part, function, voltage, and method of mechanical connection.

The limit of compilation indicates: Manufacturer's documentation TL-70: five light floors, or four lights and one acoustic.

Before adding a module, verify that the required function can be independently controlled by the existing cable harness and control system. A mechanically free position does not mean a free control channel. Mark the bolts according to the actual assembly diagram; do not derive the meaning of the wiring colors from the colors of the lights. After installation, check the seating, joint security, and cable routing.

Model example: extension and number of commands

The assembly bench uses two independently controlled lighting levels. The project requires adding a third color and a specifically confirmed sound. If the selected connection uses one discrete output for each function, the number of outputs increases from 2 to 3 + 1 = 4, i.e., by two. Simply swapping the base does not resolve this shortage. It is about the control connector model, not about the claim of the number of bolts or wiring colors of a specific part.

Service exchange procedure

  1. When power is disconnected, record the code, order of floors and connect the original assembly.
  2. Check if the cause is not a loose connection, a missing command or a damaged common wire. Lights out more floors can have only one common cause.
  3. Choose the refund according to function and electrical design. The permanently flashing and flashing module is not operationally equivalent.
  4. After the intervention, test each function separately and then the allowed contours. Bring the change into the machine's piece.

Common errors and questions

Just buy a regular light bulb for the exchange?

For a particular TL@-@ 70LL / 23W e-shop, the integrated LED indicates. The selection of the replacement should therefore be extended to the whole module and its documentation; the cap of another system cannot be automatically transferred here.

Can I connect any output marked 24 V?

The tension alone is not enough. Verify polarity, common conductor, allowable current of output and group and required mode of switching. Do not replace the missing diagram with an experimental connection.

Do I have to deal with gaskets when I switch?

Yes, check his condition and the correct seating. Electrically functional assembly may lose protection at the point of connection after mechanical intervention.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.