P1EC400E40, EMAS, emergency stop button without label
P1EC400E40 EMAS – control box with emergency stop, 1NC, yellow, 40 mm. Technical parameters, application and variant selection.
Rate 24,43 CZK per 1 EUR. Prices are indicative, invoicing is in Czech crowns.
EMAS emergency stop buttons in a plastic enclosure as a complete station for mounting on a machine or wall. Choose by number and type of contacts, release (turn or key), cable entry and label.
P1EC400E40 EMAS – control box with emergency stop, 1NC, yellow, 40 mm. Technical parameters, application and variant selection.
P1EC400E40-K-CZ EMAS – control box with emergency stop, 1NC, yellow, 40 mm. Technical parameters, application and variant selection.
P1EC400E40-K-PL EMAS – control box with emergency stop, 1NC, yellow, 40 mm. Technical parameters, application and variant selection.
P1EC400E40-K-EN EMAS – control box with emergency stop, 1NC, yellow, 40 mm. Technical parameters, application and variant selection.
P1C400M-72 EMAS – control box with emergency stop, red, 40 mm. Technical parameters, application and variant selection.
P1C400E-72 EMAS – control box with emergency stop, red, 72 mm. Technical parameters, application and variant selection.
M1C200E40 EMAS – control box with emergency stop. Technical parameters, application and variant selection.
P1EC400E40E EMAS – control box with emergency stop, red, 40 mm. Technical parameters, application and variant selection.
P1EC404E40-TES-E2-LABEL-EN EMAS – control box with emergency stop, 1NO, yellow, 40 mm. Technical parameters, application and variant selection.
Prices include the recycling fee.
A control box makes it possible to place the button on the machine frame or another accessible location without its own instrument panel. The solution includes operator access, protection of the connections and cable entry. The box is not just a housing for the same button: the fastening method, terminal space and supply cable affect both installation and maintenance. The location must match the intended function and the equipment documentation.
| Step | What to document |
|---|---|
| Identification | box type and actual fitting |
| Operating requirements | cable entry and contact diagram |
| Acceptance | button accessibility and sealing path |
The listing includes P1EC400E40, variants with Czech, English or Polish labels and other assemblies. Some items list a connector, others have a different function designation. The label language does not describe the internal wiring. When ordering, confirm the actuator, contact blocks, enclosure, cable gland or connector and the supplied label separately. The general name of this branch does not unify the properties of all assemblies.
Check the cable diameter, entry thread, seal and strain relief method. A cable gland that is too large may not grip a small cable; one that is too small can damage the sheath. The connection point must remain accessible and the wires must not press on the contact mechanism. Assess the permitted degree of protection for the assembled box including entries and fastening, not from a photo of the enclosure alone.
When replacing, copy the terminal markings of the original station and record the function of each core. A normally closed contact and an auxiliary normally open contact have different roles. The number of cable cores is no proof of the safety architecture. Before wiring, the compatibility of the actuator, contacts and evaluation device must be confirmed. Restoring the mechanical latching does not by itself assess the state of the whole machine.
For a station on the frame, write four separate items in the specification: the complete assembly type, the contact diagram, the supply cable and the mounting position. Add the required label language. This avoids a situation where the correct head arrives in an enclosure with an unsuitable connection. After mounting, check the accessibility of the actuator, fastening, sealing path and the prescribed functional behaviour of the equipment.
Check the scope of delivery for the specific item, especially the contacts, cable entry and connection accessories.
Language is only one property. The complete code and the electrical and mechanical design are decisive.
Related selection: Push Buttons, 22 mm Mounting · Accessories · Push Buttons, 30 mm Mounting.
We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.
Choose which cookies we may use. You can change your choice at any time.
They keep the cart contents, your login and selected language, and protect forms from abuse. An order cannot be completed without them, so they are used even without consent.
Google Analytics shows us traffic and behaviour on the website in aggregated form. This tells us which pages are not working for people. We do not identify anyone from this data.