Phone +420 774 723 123 Cart · 0 · empty

Individual modules and accessories

Individual modules and accessories for EMAS 70 mm IP54 beacons for assembling or repairing the beacon.

Filters
Found 8 products
OUR TIP IN STOCK

IKM7K, EMAS, module / accessories of signalling column 70 mm, red

Cat. no.: IKM7K

IKM7K EMAS - module / accessories of the signalling column 70 mm, red. Technical specifications, use, installation and selection of the correct variant.

In stock 5 or more pcs
14,94 €
excl. VAT · 18,08 € incl. VAT
OUR TIP IN STOCK

IKM7M, EMAS, module / accessories of signalling pole 70 mm, blue

Cat. no.: IKM7M

IKM7M EMAS - module / accessories of the signalling column 70 mm, blue. Technical specifications, use, installation and selection of the correct variant.

In stock 5 or more pcs
14,94 €
excl. VAT · 18,08 € incl. VAT
OUR TIP IN STOCK

IKM7R, EMAS, module / accessories of signalling column 70 mm, yellow

Cat. no.: IKM7R

IKM7R EMAS - module / accessories of the signalling column 70 mm, yellow. Technical specifications, use, installation and selection of the correct variant.

In stock 5 or more pcs
14,94 €
excl. VAT · 18,08 € incl. VAT
OUR TIP IN STOCK

IKM7Y, EMAS, module / accessories of signalling column 70 mm, green

Cat. no.: IKM7Y

IKM7Y EMAS - module / accessories of signalling column 70 mm, green. Technical specifications, use, installation and selection of the correct variant.

In stock 5 or more pcs
14,94 €
excl. VAT · 18,08 € incl. VAT
OUR TIP IN STOCK

IKM7B, EMAS, module / accessories of signalling column 70 mm, white

Cat. no.: IKM7B

IKM7B EMAS - module / accessories of the signalling column 70 mm, white. Technical specifications, use, installation and selection of the correct variant.

In stock 5 or more pcs
14,94 €
excl. VAT · 18,08 € incl. VAT
OUR TIP IN STOCK

IKM7Z024, EMAS, beacons horn

Cat. no.: IKM7Z024

IKM7Z024 EMAS - module / accessories of the signal pole 70 mm, 24 V AC / DC. Technical specifications, use, installation and selection of the correct variant.

In stock 5 or more pcs
17,93 €
excl. VAT · 21,70 € incl. VAT
OUR TIP IN STOCK

IKM7Z220, EMAS, horn for beacons

Cat. no.: IKM7Z220

IKM7Z220 EMAS - module / accessories of signal pole 70 mm, 220 V AC. Technical specifications, use, installation and selection of the correct variant.

In stock 5 or more pcs
17,93 €
excl. VAT · 21,70 € incl. VAT
OUR TIP IN STOCK

IKM7G, EMAS, adapter and cap

Cat. no.: IKM7G

IKM7G EMAS - module / accessories of the signalling column 70 mm. Technical specifications, use, installation and selection of the correct variant.

In stock 5 or more pcs
24,56 €
excl. VAT · 29,72 € incl. VAT

Prices include the recycling fee.

Individual modules and accessories

This subcategory belongs to EMAS 70 mm lamps in the IP54 branch. When selecting parts, start by identifying the original pole: note the marking, number of light panels, voltage, and capturing method. In the catalog, for example, there is a red module IKM7K without LED bulbs, an adapter with a plug IKM7G, and acoustic modules IKM7Z024 and IKM7Z220. Find an overview of the series in the category Economic beacons - diameter 70mm EMAS (IP54).

Distinguish cover, light source and acoustic part

The color module and LED bulb are two different elements when assembled. A separate source for the light floor presents EMAS (page 76)Therefore, when buying a refund, check exactly what the order item contains. To select a lamp, continue between LED bulbs up to 50mm and 70mm beacons Emas.

Do not disconnect the voltage or light function from the color of the transparent part. For a new source, check the voltage, AC or DC construction, color, and required behavior. If the pole also has a plug, consider its electrical data separately. The appearance of the replacement part does not guarantee the same connection; if the marking is unclear, supplement the identification according to the machine documentation.

How to prepare repair and installation

Before disassembly, document the order of the panels and mark the connected wires. After disconnecting the voltage, check whether the fault originates from the light source, contact, or mechanically damaged cover. When replacing, work with clean mating surfaces and do not exceed the connection resistance by force. Choose the base according to the actual spacing of the holes and cable routing, not just the diameter of the lamp.

Consider the cover for the final arrangement, including the end and entry. A new colored part does not confirm the status of other connections on the old pole. When expanding, also check the space above the existing lamp and the length of the connection. If the original assembly cannot be reliably identified, compare the scope of the repair with the selection from the category Assembled signal lights.

Model service case

At the station, the red indication stopped flashing, other states are functioning. The technician first verifies the relevant control signal and lead-in according to the machine's service procedure. Only after identifying the fault does the light source or mechanical module selection. After repair, test all indicators and check the correct assignment of signals; simply lighting one color does not prove the entire column.

Frequently Asked Questions

Can any 70 mm diameter parts be changed?

Verify compatibility by product line, interface and specific design. The average alone is not enough.

Will the new module improve the coverage of the old beacon?

Do not draw such conclusions without verifying the whole combination. Refresh the documented design during repair.

Is the acoustic module a safety device?

No. The sound signal shall inform the operator and shall not replace the protective function of the machine.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.