Phone +420 774 723 123 Cart · 0 · empty

Mushroom Head Push Buttons

EMAS mushroom head push buttons with a large head for easy pressing. Choose by head diameter, contacts and return; for emergency stop use emergency stop buttons.

Filters
Found 6 products
OUR TIP IN STOCK

D100YM30Y, EMAS, green mushroom push button

Cat. no.: D100YM30Y

D100YM30Y EMAS – mushroom control push button, green, 1 NO. Technical parameters, application, mounting and selection of the right variant.

In stock 5 or more pcs
4,73 €
excl. VAT · 5,72 € incl. VAT
OUR TIP IN STOCK

B102MS, EMAS, yellow mushroom push button

Cat. no.: B102MS

B102MS EMAS – mushroom control push button, yellow, 1 NO + 1 NC. Technical parameters, application, mounting and selection of the right variant.

In stock 5 or more pcs
5,90 €
excl. VAT · 7,14 € incl. VAT
OUR TIP IN STOCK

B102MY, EMAS, green mushroom push button

Cat. no.: B102MY

B102MY EMAS – mushroom control push button, green, 1 NO + 1 NC. Technical parameters, application, mounting and selection of the right variant.

In stock 5 or more pcs
5,90 €
excl. VAT · 7,14 € incl. VAT
OUR TIP IN STOCK

B102MK, EMAS, red mushroom push button

Cat. no.: B102MK

B102MK EMAS – mushroom control push button, red, 1 NO + 1 NC. Technical parameters, application, mounting and selection of the right variant.

In stock 5 or more pcs
5,90 €
excl. VAT · 7,14 € incl. VAT
OUR TIP IN STOCK

B102MH, EMAS, black mushroom push button

Cat. no.: B102MH

B102MH EMAS – mushroom control push button, black, 1 NO + 1 NC. Technical parameters, application, mounting and selection of the right variant.

In stock 5 or more pcs
5,90 €
excl. VAT · 7,14 € incl. VAT
OUR TIP IN STOCK

CP200MK, EMAS, red mushroom push button

Cat. no.: CP200MK

CP200MK EMAS – mushroom control push button, red, 1 NC, IP65. Technical parameters, application, mounting and selection of the right variant.

In stock 4 ks
6,13 €
excl. VAT · 7,41 € incl. VAT

Prices include the recycling fee.

Mushroom push buttons

Mushroom push buttons have an enlarged actuating head that can easily be distinguished on the panel by touch. This can be useful for normal operating commands requiring a distinct actuating surface. However, a larger head also protrudes further into the space in front of the panel and can more easily come into contact with surrounding objects. Its selection therefore involves ergonomics and the possibility of unintentional pressing, not just the required colour.

The head diameter is not the mounting diameter

This branch includes the EMAS B102MK and B102MY. models The manufacturer describes them as momentary mushroom push buttons with a 40 mm head, mounting size 22 mm and contacts 1NO + 1NC; they differ in red and green versions. See the overview of B series mushroom versions. When preparing the panel, therefore, follow the mounting drawing, not the diameter of the visible actuating surface.

Another example is the red CP200MK with one normally closed NC contact. The manufacturer also lists it as a momentary mushroom element with a 40 mm head for size 22 mm. The data are confirmed by the EMAS CP series production overview. The difference in the contact arrangement is essential when replacing: one NC is not the electrical equivalent of an NO and NC pair.

Mushroom version and emergency stop

The designation “mushroom” describes the shape. Neither the red version nor the normally closed contact by themselves prove suitability for emergency stop. If the project requires such a function, the appropriate properties must be documented for the specific device and the whole solution. Do not consider an ordinary momentary push button a replacement for a safety actuator just because it looks similar. Likewise, the PL or SIL level cannot be derived from a coloured front.

For normal operation, determine whether the command is valid only while pressed, or whether the control processes it as a one-time event after release. If you need a permanent mechanical selection, compare Latching push button switches. For a smaller front surface and a different panel layout, the following may be suitable: Non-illuminated push buttons.

Model example: space around the head

Consider two heads with a diameter of 40 mm and a proposed centre spacing of 60 mm. The net geometric gap between their circumferences is 60 − 40 = 20 mm. This is only the first layout check, not a recommended minimum mounting distance. The actual design must take into account labels, the operator's hand, gloves, adjacent actuators and service space behind the panel.

If a model label frame occupies another 5 mm around each head on each side, the outer width of one assembly is 50 mm and the gap is reduced to 10 mm. The frame dimension is chosen only for the example. The calculation shows why even a satisfactory distance between the holes alone does not prove a comfortably usable front.

Mounting and FAQ

During fitting, check the free return of the head, the fastening of the contacts and the effect of surrounding covers on access. The test should include the intended direction of pressing and the normal movement of the operator around the workplace. The protection rating of an individual component cannot be transferred to the finished panel without assessment.

Is a larger head always better?

No. Easier location by touch may be accompanied by a greater risk of accidental contact. The specific workplace is decisive.

Does a red head mean mechanical latching?

No. Colour, shape, return and contact arrangement are separate properties. A momentary mechanism cannot be changed to a latching one simply by a different command designation.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.