Phone +420 774 723 123 Cart · 0 · empty

L52 Metal Limit Switches

EMAS L52 metal limit switches with direct plunger or roller actuation. Choose by head and contacts.

Filters
Found 59 products
OUR TIP IN STOCK

L52K13MEM123, EMAS, L52, limit switch, metal body, adjustable two-way roller lever, 1 NC + 1 NO, snap action, IP65

Cat. no.: L52K13MEM123

L52K13MEM123 EMAS – limit switch, L52, adjustable two-way roller lever, 1 NC + 1 NO, snap action. Technical parameters, application and compatibility check.

In stock 5 or more pcs
22,37 €
excl. VAT · 27,06 € incl. VAT
OUR TIP IN STOCK

L52K13MEL122, EMAS, L52, limit switch, metal body, adjustable two-way lever with rubber roller, 1 NC + 1 NO, snap action, IP65

Cat. no.: L52K13MEL122

L52K13MEL122 EMAS – limit switch, L52, adjustable two-way lever with rubber roller, 1 NC + 1 NO, snap action. Technical parameters, application and compatibility check.

In stock 5 or more pcs
23,68 €
excl. VAT · 28,65 € incl. VAT
OUR TIP IN STOCK

L52K13MEM122, EMAS, L52, limit switch, metal body, adjustable two-way roller lever, 1 NC + 1 NO, snap action, IP65

Cat. no.: L52K13MEM122

L52K13MEM122 EMAS – limit switch, L52, adjustable two-way roller lever, 1 NC + 1 NO, snap action. Technical parameters, application and compatibility check.

In stock 5 or more pcs
23,68 €
excl. VAT · 28,65 € incl. VAT
OUR TIP IN STOCK

L52K23MEL123, EMAS, L52, limit switch, metal body, adjustable two-way lever with rubber roller, 1 NC + 1 NO, slow action, IP65

Cat. no.: L52K23MEL123

L52K23MEL123 EMAS – limit switch, L52, adjustable two-way lever with rubber roller, 1 NC + 1 NO, slow action. Technical parameters, application and compatibility check.

In stock 5 or more pcs
24,09 €
excl. VAT · 29,14 € incl. VAT
OUR TIP IN STOCK

L52K13MEL123, EMAS, L52, limit switch, metal body, adjustable two-way lever with rubber roller, 1 NC + 1 NO, snap action, IP65

Cat. no.: L52K13MEL123

L52K13MEL123 EMAS – limit switch, L52, adjustable two-way lever with rubber roller, 1 NC + 1 NO, snap action. Technical parameters, application and compatibility check.

In stock 5 or more pcs
24,09 €
excl. VAT · 29,14 € incl. VAT
−8 % OUR TIP IN STOCK

L52K25MEM123, EMAS, L52, limit switch, metal body, adjustable two-way roller lever, 2 NC + 1 NO, slow action, IP65

Cat. no.: L52K25MEM123

L52K25MEM123 EMAS – limit switch, L52, adjustable two-way roller lever, 2 NC + 1 NO, slow action. Technical parameters, application and compatibility check.

In stock 5 or more pcs
24,61 € 26,75 €
excl. VAT · 29,78 € incl. VAT
−8 % OUR TIP IN STOCK

L52K27MEM123, EMAS, L52, limit switch, metal body, adjustable two-way roller lever, 1 NC + 2 NO, slow action, IP65

Cat. no.: L52K27MEM123

L52K27MEM123 EMAS – limit switch, L52, adjustable two-way roller lever, 1 NC + 2 NO, slow action. Technical parameters, application and compatibility check.

In stock 5 or more pcs
24,61 € 26,75 €
excl. VAT · 29,78 € incl. VAT
−5 % OUR TIP IN STOCK

L52K27MEM121, EMAS, L52, limit switch, metal body, two-way roller lever, 1 NC + 2 NO, slow action, IP65

Cat. no.: L52K27MEM121

L52K27MEM121 EMAS – limit switch, L52, two-way roller lever, 1 NC + 2 NO, slow action. Technical parameters, application and compatibility check.

In stock 5 or more pcs
24,98 € 26,30 €
excl. VAT · 30,23 € incl. VAT
OUR TIP IN STOCK

L52K25MEM122, EMAS, L52, limit switch, metal body, adjustable two-way roller lever, 2 NC + 1 NO, slow action, IP65

Cat. no.: L52K25MEM122

L52K25MEM122 EMAS – limit switch, L52, adjustable two-way roller lever, 2 NC + 1 NO, slow action. Technical parameters, application and compatibility check.

In stock 5 or more pcs
26,75 €
excl. VAT · 32,36 € incl. VAT
OUR TIP IN STOCK

L52K25MEL123, EMAS, L52, limit switch, metal body, adjustable two-way lever with rubber roller, 2 NC + 1 NO, slow action, IP65

Cat. no.: L52K25MEL123

L52K25MEL123 EMAS – limit switch, L52, adjustable two-way lever with rubber roller, 2 NC + 1 NO, slow action. Technical parameters, application and compatibility check.

In stock 3 ks
27,61 €
excl. VAT · 33,40 € incl. VAT
OUR TIP IN STOCK

L52K27MEL123, EMAS, L52, limit switch, metal body, adjustable two-way lever with rubber roller, 1 NC + 2 NO, slow action, IP65

Cat. no.: L52K27MEL123

L52K27MEL123 EMAS – limit switch, L52, adjustable two-way lever with rubber roller, 1 NC + 2 NO, slow action. Technical parameters, application and compatibility check.

In stock 5 or more pcs
27,61 €
excl. VAT · 33,40 € incl. VAT
OUR TIP

L52K29PUM211, EMAS, L52, limit switch, metal body, direct plunger, 1 NC + 1 NO, overlapped, slow action, overlapping contacts, IP65

Cat. no.: L52K29PUM211

L52K29PUM211 EMAS – limit switch, L52, direct plunger, 1 NC + 1 NO, overlapped, slow action, overlapping contacts. Technical parameters, application and compatibility check.

On request
18,84 €
excl. VAT · 22,80 € incl. VAT

Prices include the recycling fee.

Metal Limit Switches L52

With the L52 series, assess the approach mechanism and the required length of the electrical signal together. The machine can press the switch correctly but, with a short pass, create information that the downstream control does not capture as required. The design therefore needs not only the switching position but also the contact behaviour on arrival, dwell and departure of the cam.

Direct actuation via roller

The public range includes L52K23MUM331. A separate EMAS sheet confirms a metal plunger actuator with a roller of 13 mm and slow-action contacts 1NO + 1NC. The roller diameter is neither the permitted travel nor the length of the working approach.

For selection, draw the cam profile in the direction of movement. Determine the ramp section, any flat working surface and the run-out. Also check the contact width so that the cam does not act outside the intended part of the roller. When replacing the switch, also copy the bracket position and cam distance from the original installation; the code alone may not explain the earlier setting.

Signal time window

Your own design sheet can contain three rows of speeds: slowest, usual and fastest. Assign the expected signal length and the requirement of the downstream input to each. This procedure helps reveal a problem that does not show up during slow manual turning. Do not confuse the duration of mechanical pressing with the guaranteed time of stable contact.

Author's example: passing over the working surface

Consider a practice cam whose flat working part is 24 mm long. At a speed of 0.30 m/s, i.e. 300 mm/s, passing this part takes 24 / 300 = 0.080 s, or 80 ms. If the speed is doubled, the time is reduced to 40 ms.

If the design specifies a required window of 50 ms for the model input, the second speed does not meet this preliminary condition. However, the calculation does not include contact rise, electrical transitions or detailed input behaviour. The figures are the author's own; 50 ms is not a property of any listed switch or control unit.

The conclusion for the design is: first verify the timing requirements of the actual control, then the cam profile and finally the real signal. Merely shifting the switch along the path changes the moment of the event but does not by itself lengthen the flat working surface. This difference is important when looking for occasional detection failures.

Mounting, return and service

The working test should include the actual speed and load. This general procedure is recommended by OMRON guidelines for limit switches. For the specific L52 respect its drawing and specified limits; numerical recommendations of another brand do not carry over automatically.

After adjustment, record the switching and release positions and the test conditions used. During maintenance, compare the cam profile with the original condition. Local wear, bracket displacement or a change in movement guidance are easier to find if you have the original photo and dimensions.

Does slow action mean a slow machine?

No. The name describes the contact mechanism. Permitted speeds and actuation frequency must be determined by the documentation of the specific version.

Is it enough to test switching by pressing by hand?

Such a test only confirms a partial state. It does not check the timing or the entire approach during operation.

For lever geometry, compare Metal Limit Switches L51. Another metal design variant can be found in the category Metal Limit Switches L53.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.