AG14025, ONKA, NYLON TIE, electrical installation accessories
AG14025 ONKA – NYLON TIE, electrical installation accessories. Exact technical data for selecting the cable tie / cable holder type.
Rate 24,43 CZK per 1 EUR. Prices are indicative, invoicing is in Czech crowns.
ONKA cable ties and mounting bases for bundling cables. Choose by length, width, colour and material.
AG14025 ONKA – NYLON TIE, electrical installation accessories. Exact technical data for selecting the cable tie / cable holder type.
AG15036 ONKA – WHITE NYLON CABLE TIE, cable tie 3.6x150mm, pack of 100ks. Key data: electrical installation accessories, 3.6 × 150 mm. Exact technical data for selecting the cable tie / cable holder…
AG20036 ONKA – WHITE NYLON CABLE TIE, cable tie 3.6x200mm, 100ks. Key data: electrical installation accessories, 3.6 × 200 mm. Exact technical data for selecting the cable tie / cable holder type.
AG30036 ONKA – WHITE NYLON CABLE TIE 3.6X300MM, 100ks. Key data: electrical installation accessories, 3.6 × 300 mm. Exact technical data for selecting the cable tie / cable holder type.
AG20048 ONKA – WHITE NYLON CABLE TIE, cable tie 4.8x200mm, 100ks. Key data: electrical installation accessories, 4.8 × 200 mm. Exact technical data for selecting the cable tie / cable holder type.
AG37036 ONKA – WHITE NYLON CABLE TIE, cable tie 3.6x370mm, 100ks. Key data: electrical installation accessories, 3.6 × 370 mm. Exact technical data for selecting the cable tie / cable holder type.
AG25048 ONKA – WHITE NYLON TIE, cable tie 4.8x250mm, 100ks. Key data: industrial sensor or accessory, 4.8 × 250 mm. Exact technical data for selecting the cable tie / cable holder type.
Holder TECHNOLINE – screw-on cable holder for cable ties, pack of 100ks. Key data: electrical installation accessories. Exact technical data for selecting the cable tie / cable holder type.
FSA1919B Turkuaz – CABLE TIE MOUNT, adhesive, 19x19mm. Key data: electrical installation accessories, 19 × 19 mm. Exact technical data for selecting the cable tie / cable holder type.
TVK-1 ONKA – CABLE TIE MOUNT, screw-on. Key data: electrical installation accessories. Exact technical data for selecting the cable tie / cable holder type.
AG10025 ONKA – WHITE NYLON CABLE TIE 2, 5x100mm, 100ks. Key data: electrical installation accessories, 5 × 100 mm. Exact technical data for selecting the cable tie / cable holder type.
AG15025 ONKA – WHITE NYLON CABLE TIE, cable tie 2, 5x150mm, 100ks. Key data: electrical installation accessories, 5 × 150 mm. Exact technical data for selecting the cable tie / cable holder type.
AG25016 ONKA – WHITE NYLON CABLE TIE, cable tie 1, 6 x 250 mm, 100ks. Key data: electrical installation accessories, 6 × 250 mm. Exact technical data for selecting the cable tie / cable holder type.
AG16025 ONKA – WHITE NYLON CABLE TIE, cable tie 2, 5x100mm, 100ks. Key data: electrical installation accessories, 5 × 100 mm. Exact technical data for selecting the cable tie / cable holder type.
AG25020 Turkuaz – WHITE NYLON CABLE TIE 2, 0 x 250 mm, 100ks. Key data: electrical installation accessories, 0 × 250 mm. Exact technical data for selecting the cable tie / cable holder type.
AG20025 ONKA – WHITE NYLON CABLE TIE 2, 5x200mm, 100ks. Key data: electrical installation accessories, 5 × 200 mm. Exact technical data for selecting the cable tie / cable holder type.
AG14036 ONKA – WHITE NYLON CABLE TIE 3.6X140MM, 100ks. Key data: electrical installation accessories, 3.6 × 140 mm. Exact technical data for selecting the cable tie / cable holder type.
AG30048 ONKA – WHITE NYLON CABLE TIE 4.8X300MM, 100ks, Turkuaz. Key data: electrical installation accessories, 4.8 × 300 mm. Exact technical data for selecting the cable tie / cable holder type.
Prices include the recycling fee.
A cable tie helps organise and secure a cable bundle. Its suitability depends on the dimensions, material, environment and fixing method. It is not just about whether the tie wraps around the cables. For neat routing inside a control cabinet, it is complemented by cable trunking; separate protection of the route is provided by cable conduits.
The range includes white ONKA ties of various lengths and widths, for example AG10025 and AG15025, as well as wider variants of the AG series. Separate elements are intended for fixing the bundle to a surface, for example the adhesive base FSA1919B and the screw-on holder TVK-1. For each version, check what width of tie it accepts and how it is attached to the surface.
The tie itself holds the bundle together; the base transfers the load to the mounting point. Load capacity and long-term behaviour therefore cannot be determined from the tie alone. The weak point may be the surface, the adhesive layer, the screw fixing or an unsuitable force path. An ordinary cable tie without an appropriate rating is not used for suspending loads.
The nominal length also includes the part needed for insertion into the head and locking. It is therefore not directly the circumference of the largest usable bundle. The tie width alone does not prove a specific strength either. If the permissible load is decisive for the task, you need data for the exact type and conditions of use.
When selecting, also consider access during mounting. A very short free end may make tightening difficult, while an unnecessarily long tie creates more waste and a sharp remnant after improper cutting. Finishing the end should be part of the work procedure, especially in places of later manual access.
Black colour alone does not prove UV resistance. The manufacturer HellermannTyton distinguishes standard and weather-resistant material variants in its technical catalogue of ties and fixing elements. This information explains the selection criterion; the specific properties of the tie offered must be confirmed by its own specification.
For an adhesive base, assess the surface, its cleanliness, temperature and direction of load. Suitability for one smooth material is no automatic confirmation of use on a painted, rough or greasy surface. Do not tighten cables so that their sheath visibly deforms; the required tightening force also depends on the sensitivity of the wiring.
A model circular bundle has a diameter of 30 mm, so its geometric circumference is approximately 94 mm. It cannot be concluded from this calculation that a tie of 100 mm length is enough. The head geometry, insertion and mounting requirements must be added and the bundle diameter permitted by the manufacturer must be verified.
If the same bundle is to be attached to a base, the routing of the tie also changes. Therefore finalise the selection only for the whole assembly. The circumference calculation is an approximate check of the brief, not a substitute for the product's capacity data.
Assume reuse only for a version designed for it. A damaged or unverified lock is not a reliable basis for a new installation.
Not automatically. The load may not be distributed evenly and an unsuitable surface remains part of the same problem.
We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.
Choose which cookies we may use. You can change your choice at any time.
They keep the cart contents, your login and selected language, and protect forms from abuse. An order cannot be completed without them, so they are used even without consent.
Google Analytics shows us traffic and behaviour on the website in aggregated form. This tells us which pages are not working for people. We do not identify anyone from this data.