D100DDH, EMAS, non-illuminated black push button
D100DDH EMAS – non-illuminated control push button, black, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
Rate 24,43 CZK per 1 EUR. Prices are indicative, invoicing is in Czech crowns.
EMAS non-illuminated push buttons for 22 mm mounting and other sizes – flush, extended and shrouded. Choose by colour, front shape and contacts.
D100DDH EMAS – non-illuminated control push button, black, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100DDB EMAS – non-illuminated control push button, white, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100DDS EMAS – non-illuminated control push button, yellow, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100DDM EMAS – non-illuminated control push button, blue, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100KDB EMAS – non-illuminated control push button, white, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100KDK EMAS – non-illuminated control push button, red, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100KDH EMAS – non-illuminated control push button, black, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100KDS EMAS – non-illuminated control push button, yellow, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100DDY EMAS – non-illuminated control push button, green, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100KDY EMAS – non-illuminated control push button, green, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100DDK EMAS – non-illuminated control push button, red, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100KDM EMAS – non-illuminated control push button, blue, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100YDB EMAS – non-illuminated control push button, white, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100YDM EMAS – non-illuminated control push button, blue, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100YDS EMAS – non-illuminated control push button, yellow, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100YDK EMAS – non-illuminated control push button, red, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100YDY EMAS – non-illuminated control push button, green, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
D100YDH EMAS – non-illuminated control push button, black, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
MB200DY EMAS – non-illuminated control push button, green, 1 NC, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
MB200DS EMAS – non-illuminated control push button, yellow, 1 NC, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
MB200DH EMAS – non-illuminated control push button, black, 1 NC, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
MB200DB EMAS – non-illuminated control push button, white, 1 NC, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
MB100DB EMAS – non-illuminated control push button, white, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
MB100DH EMAS – non-illuminated control push button, black, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
MB100DK EMAS – non-illuminated control push button, red, 1 NO, 500 V DC, IP50. Technical parameters, application, mounting and selection of the right variant.
Prices include the recycling fee.
A non-illuminated push button transmits a command without its own light information. It is suitable where the operator does not need confirmation directly in the actuator, or where the equipment status is shown by a separate display or indicator light. When selecting, therefore, separate two questions: how the push button should respond to pressing, and where the person sees the result of their command. The mechanical movement itself does not confirm that the control has accepted the command or that the required process has actually taken place.
The elements offered include the rectangular D100DDB, square D100KDY and round D100YDY from EMAS. For these models, the manufacturer states a mounting size of 16 mm, momentary actuation and a 1NO. contact. The individual front shapes therefore do not mean a different switching principle. The source is the EMAS D Series Plastic production overview.
For a compact panel, not only the hole itself is decisive, but also the front dimension, label and space for the finger. A rectangular actuator can help arrange labels, a round one makes a visually regular grid easier. This is a design consideration, not a guarantee of operability with gloves. Before manufacturing the panel, it is advisable to verify the layout on a mock-up with the actual actuator and common work aids.
A normally open NO contact is open in the basic position. When connecting to a control input, also check the permitted electrical load and any minimum switched current; a large current reserve is no substitute for compatibility with small signals. A mechanical contact can bounce briefly when changing state. Therefore, design the filter or evaluation in the program according to the required response and the properties of the whole input path, not according to a randomly chosen time delay.
If you want to maintain a command without holding a finger on it, compare this group with Latching push button switches. For information directly in the actuator, there are also Illuminated push buttons, mounting 22 mm; however, adding them requires a separate assessment of the light circuit.
Consider counting confirmed work operations. The model PLC reads the input every 10 ms, the operator holds the push button for 200 ms and the program adds one unit at each reading of the active input without any further condition. One press could then mean approximately 200 / 10 = 20 increments. This is not a fault of the push button, but a mismatch between the meaning of the command and its processing.
For the requirement “once per press”, the model evaluates a new change from the inactive to the active state, after suitable debouncing. Another record is allowed only after release and a new press. The times given are the author's assumptions, not measured values of the D series. A real test should include a short and a long press and holding during control power-up.
From the drawing, verify the hole, panel thickness, rear depth and the connection version of the specific code. Wires must not press on the mechanism or restrict its return. After fitting, check the legibility of the label and comfortable access to adjacent elements.
No. The function is determined by the contact and the control wiring; the colour helps orientation but does not replace the command label.
The cause may be the pulse length, filtering, a program condition or the electrical connection. The check must distinguish the mechanical movement, the contact state and the acceptance of the command, not just evaluate the feel when pressing.
If you cannot find the item you need in the e-shop, contact us with your enquiry and the complete specification of the required version.
We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.
Choose which cookies we may use. You can change your choice at any time.
They keep the cart contents, your login and selected language, and protect forms from abuse. An order cannot be completed without them, so they are used even without consent.
Google Analytics shows us traffic and behaviour on the website in aggregated form. This tells us which pages are not working for people. We do not identify anyone from this data.