Phone +420 774 723 123 Cart · 0 · empty

THERMOKON Pressure Sensors

Thermokon DLM differential pressure sensors for HVAC – monitoring filters, fans and duct pressure. Choose by range and output.

Filters
Found 20 products
OUR TIP

THERMOKON pressure sensor DLM4/V G1/2 in. (0-10V) (pressure sensor)

Cat. no.: DLM4/V G1/2

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-4Bar. The output signal is 0-10V. Connection to the pipe is…

On request
126,28 €
excl. VAT · 152,80 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM6/V G1/2 in. (0-10V) (pressure sensor)

Cat. no.: DLM6/V G1/2

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-6Bar. The output signal is 0-10V. Connection to the pipe is…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM10/V G1/2 in. (0-10V) (pressure sensor)

Cat. no.: DLM10/V G1/2

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-10Bar. The output signal is 0-10V. Connection to the pipe is…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM16/V G1/2 in. (0-10V) (pressure sensor)

Cat. no.: DLM16/V G1/2

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-16Bar. The output signal is 0-10V. Connection to the pipe is…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM25/V G1/2 in.(0-10V) (pressure sensor)

Cat. no.: DLM25/V G1/2

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-25Bar. The output signal is 0-10V. Connection to the pipe is…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM4/A G1/2 in.(4-20mA) (pressure sensor)

Cat. no.: DLM4/A G1/2

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-4Bar. The output signal is 4-20mA. Connection to the pipe is…

On request
126,28 €
excl. VAT · 152,80 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM6/A G1/2 in.(4-20mA) (pressure sensor)

Cat. no.: DLM6/A G1/2

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-6Bar. The output signal is 4-20mA. Connection to the pipe is…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM10/A G1/2 in. (4-20mA) (pressure sensor)

Cat. no.: DLM10/A G1/2

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-10Bar. The output signal is 4-20mA. Connection to the pipe…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM16/A G1/2 in.(4-20mA) (pressure sensor)

Cat. no.: DLM16/A G1/2

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-16Bar. The output signal is 4-20mA. Connection to the pipe…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM4/V G1/4 in. (0-10V) (pressure sensor)

Cat. no.: DLM4/V G1/4

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-4Bar. The output signal is 0-10V. Connection to the pipe is…

On request
126,28 €
excl. VAT · 152,80 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM6/V G1/4 in. (0-10V) (pressure sensor)

Cat. no.: DLM6/V G1/4

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-6Bar. The output signal is 0-10V. Connection to the pipe is…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM10/V G1/4 in. (0-10V) (pressure sensor)

Cat. no.: DLM10/V G1/4

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-10Bar. The output signal is 0-10V. Connection to the pipe is…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM16/V G1/4 in. (0-10V) (pressure sensor)

Cat. no.: DLM16/V G1/4

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-16Bar. The output signal is 0-10V. Connection to the pipe is…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM25/V G1/4 in. (0-10V) (pressure sensor)

Cat. no.: DLM25/V G1/4

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-25Bar. The output signal is 0-10V. Connection to the pipe is…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM4/A G1/4 in. (4-20mA) (pressure sensor)

Cat. no.: DLM4/A G1/4

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-4Bar. The output signal is 4-20mA. Connection to the pipe is…

On request
126,28 €
excl. VAT · 152,80 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM6/A G1/4 in. (4-20mA) (pressure sensor)

Cat. no.: DLM6/A G1/4

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-6Bar. The output signal is 4-20mA. Connection to the pipe is…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM10/A G1/4 in. (4-20mA) (pressure sensor)

Cat. no.: DLM10/A G1/4

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-10Bar. The output signal is 4-20mA. Connection to the pipe…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM16/A G1/4 in. (4-20mA) (pressure sensor)

Cat. no.: DLM16/A G1/4

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-16Bar. The output signal is 4-20mA. Connection to the pipe…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT
OUR TIP

THERMOKON pressure sensor DLM25/A G1/4 in. (4-20mA) (pressure sensor)

Cat. no.: DLM25/A

This is a high-quality German pressure sensor made by THERMOKON for monitoring the pressure of gases and liquids with a sensing range of 0-25Bar. The output signal is 4-20mA. Connection to the pipe…

On request
126,32 €
excl. VAT · 152,84 € incl. VAT

Prices include the recycling fee.

THERMOKON DLM pressure sensors

A pressure transmitter converts the pressure at the measuring point into an electrical signal for display or control. For THERMOKON DLM, distinguish the A/V variants, the pressure reference and the specific connection. To compare two readings correctly, you need the same units, tapping point and measuring time.

Selection data for THERMOKON pressure sensors

Step What to document
Identification range and pressure reference
Operating requirements output and input requirements
Acceptance deviation at several working points

When measuring pressure in a process or heating circuit, you need to know not only the range of the device but also the point to which the reading refers. Tapping height, pressure reference system and the electrical setting of the input can change the interpretation of the result. Therefore start the replacement of an older sensor by copying the complete designation and marking the measuring point in the circuit diagram.

Distinguishing DLM variants

The public range includes, for example, DLM4/V G1/2, DLM10/V G1/2 and DLM10/A G1/2, as well as versions with G1/4. THERMOKON DLM product sheet distinguishes variant V with a 0 to 10 V output and variant A with a 4 to 20 mA output. It describes relative pressure measurement. This is an archived manufacturer document hosted by a distributor; before replacement it must match the specific version.

For a service replacement, do not proceed only by the similarity of the connector. Compare the complete type, supply, signal, terminals and requirements of the connected input. Especially when repairing old equipment, keep a photograph of the label and the original diagram before dismantling. Record every change so that the next technician does not have to reconstruct the wiring by trial and error.

Relative pressure and tapping location

Relative pressure is referenced to ambient pressure; it is not automatically absolute pressure or the difference between two selected points in a pipe. When comparing two devices, first make sure they use the same reference and units. Only then evaluate their difference as a possible measurement error.

Also mark the connection height in the operating report. In a liquid-filled circuit, a pressure difference can be the result of a height difference, even when no flow is occurring. Similarly, it is not enough to write "pressure downstream of the pump" if there is another fitting or a different height level between two measuring points.

Author's example: influence of height

Consider a standing water column with an example density of 1 000 kg/m³ and two measuring points 3 m apart vertically. The pressure difference is Δp = ρgh = 1 000 × 9.81 × 3 = 29 430 Pa, i.e. approximately 0.294 bar. Under these assumptions, the lower point has the higher pressure.

If the lower device shows 2.000 bar relative, the upper point corresponds, in the model, to about 1.706 bar relative. This is not a deviation of the DLM nor its specification. The example neglects flow and temperature changes in density. It shows why two measurements should not be compared without describing the physical arrangement of the circuit.

Mounting and service verification

Before connecting, secure the process and depressurise the measuring point. Prepare a checklist of the connection, seal and space around the connector. Thread data do not address the chemical compatibility of all wetted parts. Therefore add confirmation of the suitability of the medium and a subsequent tightness check of the assembly under specified conditions to the list.

Carry out acceptance as a check of the entire chain: record the electrical signal, displayed pressure and reference value. For multiple measuring points, unify the reading time and the state of the process. Repeat the test at several values so that both span error and zero offset are apparent. The result should allow the check to be repeated at the next service.

For other transmitters, follow on with EMA pressure sensors; an overview of alternatives is provided by Pressure sensors.

FAQ

Are DLM/A and DLM/V interchangeable without modifications?

They differ in output and wiring. Replacement requires verification of the input, supply and the relevant diagram.

Is the DLM a documented component of a safety function?

The archived sheet used excludes use in life- or health-supporting applications and hazardous applications. Safety suitability therefore cannot be derived from operational measurement.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.