Phone +420 774 723 123 Cart · 0 · empty

FESTO magnetic sensors

Festo SME-8M (reed) and SMT-10M (magnetoresistive) magnetic sensors for sensing piston position in Festo cylinders with T- and C-slots. Choose by slot, contact and connection.

Filters
Found 16 products
OUR TIP

SME-8M-DS-24V-K-0.3-M8D, FESTO, magnetic sensor 543861

Cat. no.: SME-8M-DS-24V-K-0,3-M8D

SME-8M-DS-24V-K-0.3-M8D from FESTO: magnetic sensor 543861. Parameters and availability at Technoline.cz.

On request
17,60 €
excl. VAT · 21,30 € incl. VAT
OUR TIP

SME-8M-DS-24V-K-2.5-OE, FESTO, magnetic sensor, 543862

Cat. no.: SME-8M-DS-24V-K-2,5-OE

SME-8M-DS-24V-K-2.5-OE from FESTO: magnetic sensor, 543862. Parameters and availability at Technoline.cz.

On request
25,75 €
excl. VAT · 31,16 € incl. VAT
OUR TIP

SME-8M-ZS-24V-K-2.5-OE, Festo, magnetic reed sensor for T-slot, NO, 2-wire, 5–30 V AC/DC, cable 2.5 m, 543872

Cat. no.: SME-8M-ZS-24V-K-2,5-OE

SME-8M-ZS-24V-K-2.5-OE, Festo – magnetic proximity sensor for T-slot. Festo part number: 543872; Principle: magnetic reed; Contact function: NO (normally open); Output: contacting, bipolar, 2-wire…

On request
26,73 €
excl. VAT · 32,35 € incl. VAT
OUR TIP

SME-8M-DS-24V-K-5.0-OE, FESTO, magnetic sensor, 543863

Cat. no.: SME-8M-DS-24V-K-5,0-OE

SME-8M-DS-24V-K-5.0-OE from FESTO: magnetic sensor, 543863. Parameters and availability at Technoline.cz.

On request
30,25 €
excl. VAT · 36,61 € incl. VAT
OUR TIP

543876, FESTO, Magnetic sensor SME-8M-DS-24V-K-7, 5-OE

Cat. no.: 543876

543876 FESTO – magnetic sensor, NO. Industrial product for automation, detection or measurement.

On request
34,06 €
excl. VAT · 41,21 € incl. VAT
OUR TIP

546799, FESTO, Magnetic sensor SME-8M-DO-24V-K-7, 5-OE

Cat. no.: 546799

546799 FESTO – magnetic sensor, NO. Industrial product for automation, detection or measurement.

On request
37,09 €
excl. VAT · 44,88 € incl. VAT
OUR TIP

171169, FESTO, Magnetic sensor SME-8-ZS-KL-LED-24

Cat. no.: 171169

171169 FESTO – magnetic sensor, NO, T. Industrial product for automation, detection or measurement.

On request
37,82 €
excl. VAT · 45,77 € incl. VAT
OUR TIP

SME-8-K-LED-24, FESTO, magnetic sensor, 150855

Cat. no.: SME-8-K-LED-24

SME-8-K-LED-24 FESTO – magnetic sensor, NO, T. Industrial product for automation, detection or measurement.

On request
38,07 €
excl. VAT · 46,06 € incl. VAT
OUR TIP

526622, FESTO, Magnetic sensor SME-8-SL-LED-24

Cat. no.: 526622

526622 FESTO – magnetic sensor, M8, NO, T. Industrial product for automation, detection or measurement.

On request
40,65 €
excl. VAT · 49,18 € incl. VAT
OUR TIP

152820, FESTO, Magnetic sensor SME-8-K-LED-230

Cat. no.: 152820

152820 FESTO – magnetic sensor, NO, T. Industrial product for automation, detection or measurement.

On request
41,75 €
excl. VAT · 50,52 € incl. VAT
OUR TIP

161756, FESTO, Magnetic sensor SME-8-K-24-S6

Cat. no.: 161756

161756 FESTO – magnetic sensor, NO, T. Industrial product for automation, detection or measurement.

On request
41,84 €
excl. VAT · 50,62 € incl. VAT
OUR TIP

175404, FESTO, Magnetic sensor SME-8-K5-LED-24

Cat. no.: 175404

175404 FESTO – magnetic sensor, NO, T. Industrial product for automation, detection or measurement.

On request
42,57 €
excl. VAT · 51,51 € incl. VAT
OUR TIP

530491, FESTO, Magnetic sensor SME-8M-DS-24V-K-7, 5-OE

Cat. no.: 530491

530491 FESTO – magnetic sensor, NO, T. Industrial product for automation, detection or measurement.

On request
47,24 €
excl. VAT · 57,16 € incl. VAT
OUR TIP

160251, FESTO, SME-8-O-K-LED-24, magnetic sensor

Cat. no.: 160251

160251 FESTO – magnetic sensor, NC, T. Industrial product for automation, detection or measurement.

On request
51,05 €
excl. VAT · 61,77 € incl. VAT

SMT-10M-PS-24V-E-0.3-L-M8D, Festo, magnetoresistive piston position sensor, PNP, 5–30 V DC, M8, cable 0.3 m, 551375

Cat. no.: SMT-10M-PS-24V-E-0,3-L-M8D

SMT-10M-PS-24V-E-0.3-L-M8D, Festo – magnetoresistive proximity sensor. Festo part number: 551375; Principle: magnetoresistive; Output: PNP; Function: normally open; Supply: 5–30 V DC.

On request
51,99 €
excl. VAT · 62,90 € incl. VAT

SME-8-S-LED-24, FESTO, magnetic sensor, 150857

Cat. no.: SME-8-S-LED-24

SME-8-S-LED-24 FESTO – magnetic sensor. Industrial product for automation, detection or measurement.

On request
59,35 €
excl. VAT · 71,82 € incl. VAT

Prices include the recycling fee.

FESTO magnetic sensors

In this category you will find sensors SME-8 and SME-8M as well as model SMT-10M-PS-24V-E-0.3-L-M8D, part number 551375. The selection includes different principles and slot designs. When maintaining a machine, therefore, compare the full code including the contact designation, cable length and its termination. Also keep the FESTO numerical order designation.

What distinguishes the listed variants

SME-8M uses the reed principle and is designed for the T-slot. SMT-10M is a semiconductor magnetoresistive sensor for the C-slot. The difference therefore includes the electrical principle and the mechanical mounting. For SME-8M DS also denotes a three-wire normally open contact, ZS a two-wire normally open version and DO a three-wire normally closed contact. See FESTO overview and type key SME-8M.

There is also a difference in access during mounting. SME-8M can be inserted into the T-slot from above, while the older versions SME-8 mentioned are slid in lengthwise. When replacing on an installed cylinder, therefore, first check whether the end of the slot remains accessible. A comparison of mounting is contained in the FESTO documentation for STAF accessories.

The specific SMT-10M-PS-24V-E-0.3-L-M8D has a PNP/NO output, a 0.3 m cable with a three-pole M8x1 connector and a longitudinal outlet. It is inserted into the C-slot from above. These data for part number 551375 are confirmed by the FESTO ordering table, DHPC accessories. An identical connector with another sensor does not mean the same slot or principle.

Selection for a specific service intervention

  1. Write down the part number, the full sensor type and the actuator designation. First distinguish between T- and C-slots; then compare the electrical design.
  2. Determine the required rest state of the contact. When replacing DS with DO, the signal evaluation would have to be reassessed; do not consider them identical variants.
  3. Measure the cable route to the actual connection point. Decide whether you need a connector at the cylinder or a continuous cable to the terminal block.
  4. Compare the electrical limits of the specific part with the connected load. Do not derive the permissible current only from the number of wires.
  5. After replacement, check the function in a manual cycle and record the setting for future service.

Example found: order number 543861

SME-8M-DS-24V-K-0.3-M8D, part number 543861, is a normally open reed version with a 0.3 m cable and a three-pole threaded M8 connector. The variant 543862 has a free cable end 2.5 m long instead. This is a specific pair for comparing the connection method according to the FESTO ordering table, not common parameters of all SME sensors.

If a plant has several generations of cylinders, record them separately even if they use similar SME sensors. Add a photo of the slot access to the service record. It will help determine when planning the replacement whether the end of the profile will need to be made accessible or an adjacent part removed.

Common mistakes and FAQ

Do three wires automatically mean a semiconductor sensor?

No. For the SME-8M-DS mentioned, the documentation combines a three-wire connection with the reed principle. Check the number of wires, the principle and the contact function separately.

Is it enough to keep the designation 24V when replacing SMT-10M?

No. Include the contact type, wiring, cable length and slot access in the comparison. Before buying, make a simple list of the original and proposed code; complete unclear items according to the relevant sheets.

An overview of other brands can be found among magnetic sensors. Choose connecting parts in the category Sensor Cables and Connectors according to the exact connector.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.