MEAN WELL power supplies
MEAN WELL power supplies include switched-mode DIN-rail power supplies as well as enclosed versions for building into equipment. When selecting for a control cabinet or automation, compare the output voltage, required current, input network and mounting method. Specific properties are always determined by the full model designation and its data sheet.
Which MEAN WELL series to compare
The following overview serves for orientation in the manufacturer's series. For selecting a specific variant, the required voltage, power and space in the equipment are decisive.
| Series |
Version |
What to check when selecting |
| HDR |
Compact DIN-rail power supplies in a plastic housing |
Width, output voltage and current for the supplied assembly |
| NDR |
DIN-rail power supplies in a metal housing |
Dimensions, input range and load conditions |
| SDR |
DIN-rail power supplies |
Peak load requirement and DC OK signalling according to the model |
| LRS |
Enclosed power supplies for building in |
Fixing, access to terminals and cooling method |
Choosing voltage and power
First determine the voltage of the supplied circuit. Then add up the currents of the devices that can operate simultaneously and take into account the consumption at switch-on. The power of a DC branch can be calculated approximately as P = U × I. Voltage and current must each be satisfied separately; the figure in watts alone is not enough for selection.
Model example: an assembly with a voltage of 24 V DC and a sum of continuous consumptions of 4 A needs 96 W. A 24 V / 5 A power supply has a rated power of 120 W and a current reserve of 1 A. This is an illustration of the calculation, not a recommendation of a specific product. The final choice also depends on the start-up of the load and the operating temperature.
Mounting, cooling and operating conditions
Check the supply network, available space, mounting position and clearances prescribed by the manufacturer. At higher temperatures, it may be necessary to reduce the load according to the temperature curve in the data sheet. When replacing an older power supply, also compare the dimensions, terminals and required functions. Verify DC OK signalling, parallel operation or short-term overload capability for the selected model.
Frequently asked questions about MEAN WELL power supplies
Is the same power enough for a replacement?
Also compare the output voltage and current, input range, mounting dimensions and functions of the original power supply. Assess the replacement according to both data sheets.
What data should I prepare for the selection?
The full code of the power supply or a photo of the rating plate, the required voltage, continuous and start-up consumption, input network and dimensions of the mounting space. With this data, you can use TECHNOLINE technical support.
Other brands can be found in the category power supplies. Manufacturer documentation: overview of MEAN WELL series and guidance on choosing a power supply.