Prices include the recycling fee.
Diffuse laser sensors: detection by reflection from the object
How diffuse sensing works
The emitter and receiver are in one housing and the received light returns from the monitored object. A separate reflector is not needed. The actual part is therefore important in testing: its colour, gloss, inclination and shape can change the detection conditions. A laser source helps with a small light spot and aiming; by itself it does not mean that the sensor provides an exact numerical distance value.
Selection data: diffuse laser sensors (reflection from material)
| Step |
What to document |
| Identification |
the smallest part and its surface |
| Operating requirements |
range, background and electrical output |
| Acceptance |
detection at operating speed |
Standard reflection and background suppression
The listing includes, for example, LANBAO PSE-YC15 and PSE-YC35 with background suppression and various TECHNOLINE TLS variants. The BGS function helps to separate the working area from a more distant background. Do not confuse it with simply increasing sensitivity. When choosing, distinguish between the principle and the adjustable limits of the specific model; the same suffix or housing colour does not replace the datasheet.
What to test on the actual object
Prepare the smallest part, the darkest and the shiniest variant and the nearest background. Carry out the test in various permitted positions and at operating speed. For a hole or narrow edge, compare the light spot size with the dimension of the monitored part. Stable detection of one sample in the middle of the path does not prove the result for the entire production tolerance.
Detection time and control input
A model part 4 mm long in the direction of movement passes the sensing point at a speed of 0.5 m/s. The ideal presence interval is 0.004 / 0.5 = 0.008 s, i.e. 8 ms. The actual interval is influenced by the optics and geometry. The sensor response, input filter and PLC processing must be assessed together; this calculation does not determine the limit of any model offered.
Electrical connection and mounting
Choose PNP or NPN according to the control input. Verify the NO/NC or light-on/dark-on function according to the documentation and the actual detected state. Check the supply, number of pins and wiring, not just the connector size. A stable bracket, a clean optical surface and access for adjustment make long-term operation easier. Look up the laser class and instructions for working with the beam for the specific code. A standard process sensor is not automatically a safety device for personnel protection.
FAQ
Does every diffuse laser sensor measure distance?
No. Switching presence detection and a measuring output are different functions.
Is it enough to adjust the sensitivity when the sensor responds to the background?
Assess the sensing principle, distances and object properties. The BGS function must be documented for the selected model.
Related selection: Retro-reflective laser sensors (with reflector) · Through-beam laser barriers (receiver + emitter).
Documents for further verification: manufacturer's documentation.