Phone +420 774 723 123 Cart · 0 · empty

Pneumatic accessories

SMC, Pneuflex and other pneumatic accessories – push-in fittings, threaded fittings, reducers, flow control valves, silencers, plugs, blow guns and suction cups. Choose by tube diameter and connection thread.

Subcategories

Filters
Found 696 products
OUR TIP IN STOCK

TPB10-G03, TECHNOLINE, push-in T-fitting, thread in the bottom branch, tube Ø10mm, male thread G3/8

Cat. no.: TPB10-G03

TPB10-G03, TECHNOLINE: push-in T-fitting, thread in the bottom branch; tube Ø10mm, male thread G3/8. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

In stock 5 or more pcs · in multiples of 5 pcs
2,49 €
excl. VAT · 3,02 € incl. VAT
OUR TIP IN STOCK

TJSC04-M6, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread M6

Cat. no.: TJSC04-M6

TJSC04-M6, TECHNOLINE: one-way flow control valve, meter-out. meter-out throttling, tube Ø4mm, thread M6. Use in pneumatic distribution and verified mounting criteria.

In stock 5 or more pcs
2,51 €
excl. VAT · 3,03 € incl. VAT
OUR TIP IN STOCK

TPD06-G04, TECHNOLINE, push-in T-fitting, thread in the run branch, tube Ø6mm, male thread G1/2

Cat. no.: TPD06-G04

TPD06-G04, TECHNOLINE: push-in T-fitting, thread in the run branch; tube Ø6mm, male thread G1/2. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

In stock 5 or more pcs · in multiples of 5 pcs
2,59 €
excl. VAT · 3,13 € incl. VAT
OUR TIP IN STOCK

TPB06-G04, TECHNOLINE, push-in T-fitting, thread in the bottom branch, tube Ø6mm, male thread G1/2

Cat. no.: TPB06-G04

TPB06-G04, TECHNOLINE: push-in T-fitting, thread in the bottom branch; tube Ø6mm, male thread G1/2. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

In stock 5 or more pcs · in multiples of 5 pcs
2,59 €
excl. VAT · 3,13 € incl. VAT
OUR TIP IN STOCK

TJSC04-G01, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread G1/8

Cat. no.: TJSC04-G01

TJSC04-G01, TECHNOLINE: one-way flow control valve, meter-out. meter-out throttling, tube Ø4mm, thread G1/8. Use in pneumatic distribution and verified mounting criteria.

In stock 5 or more pcs
2,65 €
excl. VAT · 3,21 € incl. VAT
OUR TIP IN STOCK

TPE16, TECHNOLINE, T-connector for Ø16mm tube

Cat. no.: TPE16

TPE16, TECHNOLINE, T-connector for Ø16mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

In stock 5 or more pcs · in multiples of 5 pcs
2,66 €
excl. VAT · 3,21 € incl. VAT
OUR TIP IN STOCK

TPY16, TECHNOLINE, Y-connector for Ø16mm tube

Cat. no.: TPY16

TPY16, TECHNOLINE, Y-connector for Ø16mm tube. Angled Y-branching for routing three branches with suitable tube geometry.

In stock 5 or more pcs · in multiples of 5 pcs
2,66 €
excl. VAT · 3,21 € incl. VAT
OUR TIP IN STOCK

TBPU12, TECHNOLINE, straight all-metal fitting for Ø12mm tube

Cat. no.: TBPU12

TBPU12, TECHNOLINE, straight all-metal fitting for Ø12mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread. Metal body.

In stock 5 or more pcs
2,66 €
excl. VAT · 3,21 € incl. VAT
OUR TIP IN STOCK

TBESL-G04, TECHNOLINE, adjustable exhaust silencer, male thread G1/2

Cat. no.: TBESL-G04

TBESL-G04, TECHNOLINE: adjustable exhaust silencer. male thread G1/2. Use in pneumatic distribution and verified mounting criteria.

In stock 5 or more pcs · in multiples of 5 pcs
2,66 €
excl. VAT · 3,22 € incl. VAT
OUR TIP IN STOCK

TJSC06-G01, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø6mm, thread G1/8

Cat. no.: TJSC06-G01

TJSC06-G01, TECHNOLINE: one-way flow control valve, meter-out. meter-out throttling, tube Ø6mm, thread G1/8. Use in pneumatic distribution and verified mounting criteria.

In stock 5 or more pcs
2,70 €
excl. VAT · 3,27 € incl. VAT
OUR TIP IN STOCK

TJSC08-G01, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø8mm, thread G1/8

Cat. no.: TJSC08-G01

TJSC08-G01, TECHNOLINE: one-way flow control valve, meter-out. meter-out throttling, tube Ø8mm, thread G1/8. Use in pneumatic distribution and verified mounting criteria.

In stock 5 or more pcs
2,70 €
excl. VAT · 3,27 € incl. VAT
IN STOCK

TPM10, TECHNOLINE, bulkhead push-in fitting, 2× tube outer Ø10mm, panel mounting

Cat. no.: TPM10

TPM10, TECHNOLINE: bulkhead push-in fitting. 2× tube outer Ø10mm, panel mounting. Use in pneumatic distribution and verified mounting criteria.

In stock 5 or more pcs · in multiples of 5 pcs
2,70 €
excl. VAT · 3,27 € incl. VAT
OUR TIP IN STOCK

TPA04, TECHNOLINE, in-line flow control valve, 2× push-in port for Ø4mm tube

Cat. no.: TPA04

TPA04, TECHNOLINE: in-line flow control valve. 2× push-in port for Ø4mm tube. Use in pneumatic distribution and verified mounting criteria.

In stock 5 or more pcs
2,80 €
excl. VAT · 3,39 € incl. VAT
OUR TIP IN STOCK

TPD08-G04, TECHNOLINE, push-in T-fitting, thread in the run branch, tube Ø8mm, male thread G1/2

Cat. no.: TPD08-G04

TPD08-G04, TECHNOLINE: push-in T-fitting, thread in the run branch; tube Ø8mm, male thread G1/2. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

In stock 5 or more pcs · in multiples of 5 pcs
2,82 €
excl. VAT · 3,42 € incl. VAT
OUR TIP IN STOCK

TPB08-G04, TECHNOLINE, push-in T-fitting, thread in the bottom branch, tube Ø8mm, male thread G1/2

Cat. no.: TPB08-G04

TPB08-G04, TECHNOLINE: push-in T-fitting, thread in the bottom branch; tube Ø8mm, male thread G1/2. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

In stock 5 or more pcs · in multiples of 5 pcs
2,82 €
excl. VAT · 3,42 € incl. VAT
OUR TIP IN STOCK

TPD10-G04, TECHNOLINE, push-in T-fitting, thread in the run branch, tube Ø10mm, male thread G1/2

Cat. no.: TPD10-G04

TPD10-G04, TECHNOLINE: push-in T-fitting, thread in the run branch; tube Ø10mm, male thread G1/2. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

In stock 5 or more pcs · in multiples of 5 pcs
2,82 €
excl. VAT · 3,42 € incl. VAT
OUR TIP IN STOCK

TPB10-G04, TECHNOLINE, push-in T-fitting, thread in the bottom branch, tube Ø10mm, male thread G1/2

Cat. no.: TPB10-G04

TPB10-G04, TECHNOLINE: push-in T-fitting, thread in the bottom branch; tube Ø10mm, male thread G1/2. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

In stock 5 or more pcs · in multiples of 5 pcs
2,82 €
excl. VAT · 3,42 € incl. VAT
OUR TIP IN STOCK

TBPV08, TECHNOLINE, all-metal elbow fitting 90° for Ø8mm tube

Cat. no.: TBPV08

TBPV08, TECHNOLINE, all-metal elbow fitting 90° for Ø8mm tube. Change of line direction by 90° without a sharp tube bend right at the joint. Metal body.

In stock 5 or more pcs
2,84 €
excl. VAT · 3,43 € incl. VAT
OUR TIP IN STOCK

TPA06, TECHNOLINE, in-line flow control valve, 2× push-in port for Ø6mm tube

Cat. no.: TPA06

TPA06, TECHNOLINE: in-line flow control valve. 2× push-in port for Ø6mm tube. Use in pneumatic distribution and verified mounting criteria.

In stock 5 or more pcs
2,95 €
excl. VAT · 3,57 € incl. VAT
OUR TIP IN STOCK

TJSC04-G02, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø4mm, thread G1/4

Cat. no.: TJSC04-G02

TJSC04-G02, TECHNOLINE: one-way flow control valve, meter-out. meter-out throttling, tube Ø4mm, thread G1/4. Use in pneumatic distribution and verified mounting criteria.

In stock 5 or more pcs
3,05 €
excl. VAT · 3,68 € incl. VAT
OUR TIP IN STOCK

TJSC06-G02, TECHNOLINE, one-way flow control valve, meter-out, meter-out throttling, tube Ø6mm, thread G1/4

Cat. no.: TJSC06-G02

TJSC06-G02, TECHNOLINE: one-way flow control valve, meter-out. meter-out throttling, tube Ø6mm, thread G1/4. Use in pneumatic distribution and verified mounting criteria.

In stock 5 or more pcs
3,05 €
excl. VAT · 3,68 € incl. VAT
OUR TIP IN STOCK

TPD12-G01, TECHNOLINE, push-in T-fitting, thread in the run branch, tube Ø12mm, male thread G1/8

Cat. no.: TPD12-G01

TPD12-G01, TECHNOLINE: push-in T-fitting, thread in the run branch; tube Ø12mm, male thread G1/8. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.

In stock 5 or more pcs · in multiples of 5 pcs
3,11 €
excl. VAT · 3,76 € incl. VAT

Prices include the recycling fee.

Pneumatic accessories

Pneumatic accessories connect individual parts of the air circuit and help adapt its arrangement to a specific machine. When selecting, you need to know not only the part designation, but also both connected counterparts, the required function and operating conditions. A similar appearance of fittings or the same brand do not by themselves confirm interchangeability. This category is a signpost for line design, air distribution, flow adjustment and vacuum gripping.

Select the branch according to the task in the circuit

  • Threaded fitting: connection to a specific threaded port of the equipment.
  • Push-in fittings: selecting a connection for the corresponding pipe or tube.
  • Bulkhead fittings: passing the line through a panel with resolved fixing.
  • Reducing fittings: connecting different connection sizes.
  • Flow control valves: flow adjustment taking into account the direction and function of the valve.
  • Silencers: exhaust accessories, which are also selected according to flow requirements.
  • Blanking plugs: closing the connection with a corresponding version.
  • Blow gun: manual work with air according to the rules of the given workplace.
  • Pneumatic suction cups: contact of the vacuum gripper with the surface of the handled part.

Three checks before ordering

Mechanical interface: record the full connection designation on both sides. For the tube, distinguish the outer and inner diameter; for the thread, its type, size and sealing method. Also check the space for mounting and service; the correct part may not be suitable for an installation that is too tight.

Function: draw where the medium should flow from and to. Connecting, branching, blanking, throttling and gripping are different tasks. For more complex accessories, compare the diagram and the full order code, not just the first part of the name.

Operating conditions: verify the permissible medium, pressure, temperature and environment for the specific version in the manufacturer's documentation. Assess use in vacuum separately. Do not derive the permitted range of the whole assembly from a parameter of one of its elements.

Model list of connection points

Let us consider four workstations, each with two separate lines. If each line forms one uninterrupted section, eight sections have a total of sixteen ends to connect. Dividing all eight sections into two parts adds eight intermediate fittings and sixteen more tube ends. This is our own inventory example, not a calculation of pressure loss or probability of leakage. It helps reveal missing counterparts and distinguish a spare piece from a part actually needed in the assembly.

Mounting and troubleshooting

Before intervention, shut down the equipment according to its instructions and secure it against unexpected movement. Disconnect lines only after safely removing pressure; for vacuum gripping, first secure the transported object. Take the mounting procedure, tightening and insertion check from the instructions of the specific accessory. After assembly, verify tightness, actual function and maintenance access during controlled commissioning.

In case of a leak, first determine its location, then check the counterpart, line size, seal condition and mechanical stress on the joint. In case of slow movement, monitor the whole supply and exhaust. Random replacement of one part without verifying the cause can leave the original problem in another part of the circuit.

FAQ

Can I replace a fitting based on a photo?

A photo helps determine the shape. For ordering, however, add dimensions, exact connection, function and operating limitations. For a replacement, record the original code and also compare the counterpart.

How to prepare documentation for selecting accessories?

Attach a simple circuit diagram, a list of connections, tube sizes and operating conditions. Mark what you already have and what should be part of the delivery; this makes the list and the compatibility check more precise.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.