KQ2S10-02AS, SMC, straight fitting with internal hexagon, tube Ø10mm, male R1/4
KQ2S10-02AS, SMC, straight fitting with internal hexagon, tube Ø10mm, male R1/4. Straight connection of the tube to threaded port R1/4; with pre-applied thread seal.
Rate 24,43 CZK per 1 EUR. Prices are indicative, invoicing is in Czech crowns.
SMC, Pneuflex and other pneumatic accessories – push-in fittings, threaded fittings, reducers, flow control valves, silencers, plugs, blow guns and suction cups. Choose by tube diameter and connection thread.
KQ2S10-02AS, SMC, straight fitting with internal hexagon, tube Ø10mm, male R1/4. Straight connection of the tube to threaded port R1/4; with pre-applied thread seal.
TBPC06-G03, TECHNOLINE: straight push-in fitting; tube Ø6mm, male thread G3/8. Push-in connection for pneumatics.
TBPC08-G03, TECHNOLINE: straight push-in fitting; tube Ø8mm, male thread G3/8. Push-in connection for pneumatics.
TBPC10-G02, TECHNOLINE: straight push-in fitting; tube Ø10mm, male thread G1/4. Push-in connection for pneumatics.
TBPE06, TECHNOLINE, all-metal T-connector for Ø6mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance. Metal body.
KQ2R06-08A, SMC: plug-in reducer into a push-in fitting. tube Ø6mm → stem for Ø8mm port. Use in pneumatic distribution and verified mounting criteria.
KQ2L04-01AS, SMC, elbow fitting 90°, tube Ø4mm, male R1/8. Elbow connection of the tube to threaded port R1/8; changes the line direction at the component. With pre-applied thread seal.
KQ2L04-02AS, SMC, elbow fitting 90°, tube Ø4mm, male R1/4. Elbow connection of the tube to threaded port R1/4; changes the line direction at the component. With pre-applied thread seal.
TBPB06-G01, TECHNOLINE: push-in T-fitting, thread in the bottom branch; tube Ø6mm, male thread G1/8. Push-in connection for pneumatics.
TBPL06-G01, TECHNOLINE: elbow push-in fitting 90°; tube Ø6mm, male thread G1/8. Push-in connection for pneumatics.
TBPCF06-G03, TECHNOLINE: straight push-in fitting with female thread; tube Ø6mm, female thread G3/8. Push-in connection for pneumatics.
KQ2L04-M5A, SMC, elbow fitting 90°, tube Ø4mm, male M5. Elbow connection of the tube to threaded port M5; changes the line direction at the component.
KQ2L06-M6A, SMC, elbow fitting 90°, tube Ø6mm, male M6. Elbow connection of the tube to threaded port M6; changes the line direction at the component.
TBPCF08-G03, TECHNOLINE: straight push-in fitting with female thread; tube Ø8mm, female thread G3/8. Push-in connection for pneumatics.
TBPCF10-G03, TECHNOLINE: straight push-in fitting with female thread; tube Ø10mm, female thread G3/8. Push-in connection for pneumatics.
TBPC10-G03, TECHNOLINE: straight push-in fitting; tube Ø10mm, male thread G3/8. Push-in connection for pneumatics.
KQ2F06-01A, SMC, straight fitting with female thread, tube Ø6mm, female Rc1/8. Straight connection of the tube to threaded port Rc1/8; the thread seal must be verified.
KQ2L02-M3G, SMC, elbow fitting 90°, tube Ø2mm, male M3. Elbow connection of the tube to threaded port M3; changes the line direction at the component.
KQ2L06-01A, SMC, elbow fitting 90°, tube Ø6mm, male R1/8. Elbow connection of the tube to threaded port R1/8; changes the line direction at the component.
TBPM04, TECHNOLINE: all-metal bulkhead push-in fitting. 2× tube outer Ø4mm, panel mounting. Use in pneumatic distribution and verified mounting criteria.
KQ2T02-00A, SMC, T-connector, 3× tube Ø2mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.
ZP2-B02EUS, SMC: vacuum suction cup. Ø2mm, short flat EU, silicone. Selection by profile, mounting and vacuum.
KQ2L23-M3G, SMC: elbow push-in fitting 90°; tube Ø3.2mm, thread M3. Dimensions and use according to the catalogue series.
ZPT1-A5, SMC: vacuum suction cup mounting adapter. mechanical connecting element of an assembly with thread M5×0.8. Selection by profile, mounting and vacuum.
KQ2L06-02AS, SMC, elbow fitting 90°, tube Ø6mm, male R1/4. Elbow connection of the tube to threaded port R1/4; changes the line direction at the component. With pre-applied thread seal.
Prices include the recycling fee.
Pneumatic accessories connect individual parts of the air circuit and help adapt its arrangement to a specific machine. When selecting, you need to know not only the part designation, but also both connected counterparts, the required function and operating conditions. A similar appearance of fittings or the same brand do not by themselves confirm interchangeability. This category is a signpost for line design, air distribution, flow adjustment and vacuum gripping.
Mechanical interface: record the full connection designation on both sides. For the tube, distinguish the outer and inner diameter; for the thread, its type, size and sealing method. Also check the space for mounting and service; the correct part may not be suitable for an installation that is too tight.
Function: draw where the medium should flow from and to. Connecting, branching, blanking, throttling and gripping are different tasks. For more complex accessories, compare the diagram and the full order code, not just the first part of the name.
Operating conditions: verify the permissible medium, pressure, temperature and environment for the specific version in the manufacturer's documentation. Assess use in vacuum separately. Do not derive the permitted range of the whole assembly from a parameter of one of its elements.
Let us consider four workstations, each with two separate lines. If each line forms one uninterrupted section, eight sections have a total of sixteen ends to connect. Dividing all eight sections into two parts adds eight intermediate fittings and sixteen more tube ends. This is our own inventory example, not a calculation of pressure loss or probability of leakage. It helps reveal missing counterparts and distinguish a spare piece from a part actually needed in the assembly.
Before intervention, shut down the equipment according to its instructions and secure it against unexpected movement. Disconnect lines only after safely removing pressure; for vacuum gripping, first secure the transported object. Take the mounting procedure, tightening and insertion check from the instructions of the specific accessory. After assembly, verify tightness, actual function and maintenance access during controlled commissioning.
In case of a leak, first determine its location, then check the counterpart, line size, seal condition and mechanical stress on the joint. In case of slow movement, monitor the whole supply and exhaust. Random replacement of one part without verifying the cause can leave the original problem in another part of the circuit.
A photo helps determine the shape. For ordering, however, add dimensions, exact connection, function and operating limitations. For a replacement, record the original code and also compare the counterpart.
Attach a simple circuit diagram, a list of connections, tube sizes and operating conditions. Mark what you already have and what should be part of the delivery; this makes the list and the compatibility check more precise.
We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.
Choose which cookies we may use. You can change your choice at any time.
They keep the cart contents, your login and selected language, and protect forms from abuse. An order cannot be completed without them, so they are used even without consent.
Google Analytics shows us traffic and behaviour on the website in aggregated form. This tells us which pages are not working for people. We do not identify anyone from this data.